• Korean Journal of Remote Sensing
• /
• v.34 no.6_1
• /
• pp.1009-1024
• /
• 2018

With the increased use of LiDAR (Light Detection and Ranging) that can obtain over millions of point dataset, methodologies for efficient search and dimensionality reduction for the point cloud became a crucial technique. The existing octree-based "parametric algorithm" has proved its efficiency and contributed as a part of PCL (Point Cloud Library). However, the implementation of the algorithm on GPU (Graphics Processing Unit) is considered very difficult because of structural constraints of the octree implemented in PCL. In this paper, we present a method for the parametric algorithm on GPU environment and implement a projection of the queried points on four directions with an improved noise reduction.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.348-351
• /
• 2009

본 논문에서는 구조해석을 위한 PSC 박스 거더교의 객체 정보 모델에 관한 연구를 수행하였다. 대상 교량의 객체 정보 모델을 생성하기 위해서는 수많은 형상 및 치수에 관한 파라미터를 필요로 하게 된다. 따라서 본 연구에서는 이 교량의 설계 목적에 맞는 파라미터를 분류하였고, 파라미터들 사이의 계층구조(Structure)와 상관관계를 정의하였다. 또한 본 연구에서 적용된 인터페이스 프로그램은 3차원 객체 모델에서 출력된 파라미터를 변환하여 구조해석을 위한 입력값으로 변환시켜, 해석 결과값을 구조계산서에 출력시킴으로써 엔지니어가 설계 타당성과 모델변경 요구를 용이하게 할 수 있게 하였다. 그리고 대상 모델에 대한 설계변경은 구조물의 특징에 맞는 상관파라메트릭 방법을 적용하여 신속하게 할 수 있도록 유도하였다. 이 연구를 통해 건설구조물의 설계를 3D 모델로 하기위한 가능성을 확인하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.6
• /
• pp.351-358
• /
• 2020

This paper presents a tuned mass damper (TMD) utilizing a parametric design technique to reduce the dynamic responses to seismic loads of retractable large spatial structures. An artificial intelligence algorithm was developed to automatically search for the installation position of the damping device. This enables confirming the dynamic response of the structure in real time while finding the optimum position for the damping device. Further, the optimum mass of the damping device is determined from among several alternatives, and a design that can be effectively applied to both open and closed conditions of the roof is obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.475-481
• /
• 2019

The importance of performance-based design feedback is being emphasized when it comes to the potential impact that affects all the lifecycle of the building. However, the latency and disconnection of domain expert in the sector of AEC/FM remain current obstacles between design and performance feedback. It is hard to utilize performance feedback information for design exploration and support design decision making during the conceptual phase of design. Using parametric design, this paper proposes various design alternatives from a set of rules and constraints defined by algorithms for the geometric configurations of an Office Building. A Building Performance Analysis (BPA) was to developed using Autodesk® Revit® 2019 which integrates Autodesk® Green Building Studio® to predict its sufficient daylighting conditions of the LEED v4's Daylighting Autonomy (DA). The parametric-based performance feedback of this study outlines potential design improvements for further exploration in application to the early design process.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.137-140
• /
• 2004

낮은 대역폭에서 다채널 다객체 오디오 신호를 전송하기위해 새롭게 제안된 Spatial Audio Coding 기술은 멀티채널 오디오 신호를 다운믹싱하고 나머지 채널은 음향공간상의 위치정보를 나타내는 파라미터들로 압축하여 표현하는 파라메트릭 압축 방식이다. 본 논문에서는 Spatial Audio Coding 기술중의 하나인 BCC 기술을 이용하여 스테레오 오디오 코덱을 구현하고, 주관듣기평가 실험을 통하여 AAC와 비슷한 성능을 나타내면서도 높은 압축율을 얻을 수 있음을 확인하였다.

• Information and Communications Magazine
• /
• v.27 no.2
• /
• pp.3-12
• /
• 2010

본고에서 테라헤르츠 광 신호의 발생과 검출을 위한 다양한 기술에 대하여 리뷰하였다. 이들 중 테라헤르츠 광원기술로서 중요도가 높은, 광전도 신호원, 파라메트릭 신호원 및 차주파수 방식의 신호원 기술을 논의하고, 전자 주입형 양자폭포레이저(Quantum Cascade Laser) 방식과 광혼합(Photomixing) 방식의 신호원 기술 및 이와 관련된 결과와 개발된 테라헤르츠 광신호원의 성능에 대하여도 소개한다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.207-211
• /
• 2008

The importance of cost management in early stage has been increasing due to market change and competition severence in construction industry. Because the adjustable budget is only 20% after finishing design stage, the critical decision is made in the early stage. However, in the early stage, the design information is not enough to make crucial decision. Therefore, this research suggests the predicting method on the purpose of accurate cost estimation. The parametric estimation is appropriate for the early stage, especially it has the strength of rapidity in cost estimation. This research analyzes 84 actual data of public apartment on the scale of $11{\sim}15$ stories, and then performs the correlation analysis between cost and influence factors. After eliminating the parameters which causes the problem of multicollinearity, this research derived the formula through the multi-regression analysis.

• Journal of the Korean earth science society
• /
• v.38 no.1
• /
• pp.80-90
• /
• 2017

To build tetrahedra mesh for FEM numerical analysis, Boundary Representation (B-Rep) model is required, which provides the efficient volume description of an object. In engineering, the parametric solid modeling method is used for building B-Rep model. However, a geological modeling generally adopts discrete modeling based on the triangulated surface, called a Sealed Geological Model, which defines geological domain by using geological interfaces such as horizons, faults, intrusives and modeling boundaries. Discrete B-Rep model is incompatible with mesh generation softwares in engineering because of discrepancies between discrete and parametric technique. In this research we have developed a converting program from Sealed Geological Model to Gmsh and COMSOL software. The developed program can convert complex geological model built by geomodeling software to user-friendly FEM software and it can be applied to geoscience simulation such as geothermal, mechanical rock simulation etc.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.787-789
• /
• 2004

본 논문에서는 별도의 센서를 부착하지 않고 영상만을 이용하여 실시간으로 손 형상을 인식하는 알고리즘에 대해 기술한다. 손은 형상이 매우 복잡하기 때문에 2차원 형상의 불변량에 해당하는 에지의 방향성 히스토그램을 이용하여 인식을 행한다. 이 방법은 복잡한 배경에서 색상정보를 이용하여 손 영역이 정확히 추출되면 계산량이 적고 조명변화에 덜 민감하기 때문에 실시간 손 형상 인식에 적합하다. 본 논문에서는 손의 형상제시 방향이 변하는 경우에도 인식을 가능하게 하기 위해 주성분 분석법을 사용하여 인식오차를 줄이는 방법을 기술한다. 이 방법을 사용함으로써 손 형상이 3차원적으로 회전에 의해 변하는 경우도 인식가능하게 되었다. 실험부분에서 제안하는 방법을 이용하여 가정용 가전제품이나 게임을 제어하는 실시간 휴먼 인터페이스 시스템 제작기술로 활용될 수 있음을 보인다.

• Journal of KIBIM
• /
• v.4 no.1
• /
• pp.1-7
• /
• 2014

The construction method using PC(Precast Concrete) has been widely used because the method can shorten the construction period and improve construction quality. In this paper, through the analysis of present design process for PC railway platform, design parameters on the geometry and properties were extracted and 3D information models for PC railway platform were constructed by the parametric modeling technique. Furthermore, the interface module was developed to link 3D models to the structural analysis/design sheet and database program using VBA(Visual Basic Application). This information model could be used in various areas including structural analysis and design, 2D drawing, quantity estimation and 4D simulation including clash detection.