• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.4
• /
• pp.257-263
• /
• 2019

Multilayered structures include lamination by relatively thick plies and thin interlayers. For efficient peridynamic analysis of dynamic fracturing multilayered structures, the interlayer is modeled using ghost peridynamic particles while the ply is formulated via real peridynamics. With the nonlocal ghost interlayer, one may keep the discretization resolution low for the ply. In this study, the characteristics of dynamic wave propagation through the nonlocal ghost interlayer in peridynamic analysis are investigated. It is observed that the interlayer not only binds adjacent plies, but also significantly influences energy transfer between plies, and thereby their deformation and motion. In addition, near a surface or boundary, peridynamic particles do not have a full nonlocal neighborhoods. This causes the effective material properties near the surface to be different from those in the bulk. Surface correction based on neighborhood volumes is employed. The impact of surface correction on wave propagation in multilayered structures is investigated.

• Korean Journal of Metals and Materials
• /
• v.46 no.10
• /
• pp.634-645
• /
• 2008

In this study, surface composites were fabricated with Fe-based amorphous alloy powders and VC powders by high-energy electron beam irradiation, and the correlation of their microstructure with hardness and fracture toughness was investigated. Mixture of Fe-based metamorphic powders and VC powders were deposited on a plain carbon steel substrate, and then electron beam was irradiated on these powders without flux to fabricate surface composites. The composite layers of 1.3~1.8 mm in thickness were homogeneously formed without defects and contained a large amount (up to 47 vol.%) of hard $Cr_2B$ and $V_8C_7$ crystalline particles precipitated in the solidification cell region and austenite matrix, respectively. The hardness of the surface composites was directly influenced by hard $Cr_2B$ and $V_8C_7$ particles, and thus was about 2 to 4 times greater than that of the steel substrate. Observation of the microfracture process and measurement of fracture toughness of the surface composites indicated that the fracture toughness increased with increasing additional volume fraction of $V_8C_7$ particles because $V_8C_7$ particles effectively played a role in blocking the crack propagation along the solidification cell region heavily populated with $Cr_2B$ particles. Particularly in the surface composite fabricated with Fe-based metamorphic powders and 30 % of VC powders, the hardness and fracture toughness were twice higher than those of the surface composite fabricated without mixing of VC powders.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.119-126
• /
• 2022

This study proposed a BCM(Binding Column Method) that can reinforce the insufficient seismic force of piloti buildings that are not designed for seismic resistance. In addition, 4 reinforcement specimens and 1 reference specimen were manufactured for the proposed seismic reinforcement method. The effect of improving seismic performance before and after reinforcement was examined through repeated loading tests. As a result of experiment, seismic reinforcement specimen with BCM system showed hysteretic characteristics of a large ellipse with great energy dissipation ability and increased strength and stiffness, while reference specimen showed rapid reduction in strength and brittle shear failure column. In addition, it can be seen that the reinforcing effect is improved as the gap is narrow, the torque is large, and the thickness of the L-shaped steel sheet is thicker. The SC4 specimen showed the best seismic performance reinforcement effect.

• Resources Recycling
• /
• v.30 no.2
• /
• pp.61-67
• /
• 2021

Scraps are a byproduct of the machining process used for transforming titanium ingots into useful mechanical parts. Scraps take two forms, namely, bulky scraps, which are produced by cutting, and chipped scraps, which are produced by milling. Bulky scraps are comparatively easier to recycle because of their small surface area and less oxygen content; as a result, they pose only a small risk of explosion. In contrast, chipped scraps pose a higher risk of explosion, because of which, their recycling is complicated, resulting in most such scraps being discarded. With the aim of avoiding this waste, we proposed a novel process for converting chipped scraps into stable carbide materials. Methods typically applied to reduce particle size and impair the formation of solid solution type phase in the carbide materials were used to improve the mechanical properties of carbides prepared from chipped scraps. Our novel recycling process reduced carbide production costs and improved carbide quality.

• Journal of the Korea Convergence Society
• /
• v.12 no.7
• /
• pp.159-167
• /
• 2021

The increasingly severe environmental problems such as resource depletion and ecological damage, and consumers' concern for sustainable fashion, make the fashion industry chain develop towards green energy saving. The purpose of this study is to explore the attitude and consumption psychology of specific groups towards sustainable fashion consumption, as well as their specific views and attitudes towards recycled textiles or fabrics for re-manufacturing clothing. This paper attempts to understand how the characteristics of recycled clothing affect consumer. Based on the review of relevant literature, a series of determinants affecting consumer behavior is determined, and the characteristics of recycled products, such as expression value and social value, are determined. An online questionnaire was designed based on this conceptual framework, and 226 valid, complete answers were received. The results show that the emphasis on social value and environmental protection consciousness can effectively affect consumers' decision-making. These findings were helpful to the research of whole green environmental protection and ecological clothing recycling industry system, promote the sustainable development of the clothing industry.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.433-438
• /
• 2022

A carbon cycle model based method is proposed in order to evaluate the effectiveness of various policies and projects to achieve carbon neutrality. The proposed model was validated by properly reproducing the increase in the concentration of carbon dioxide in the atmosphere and the rise of the global average temperature from the data of anthropogenic carbon emissions and deforestation since the industrial revolution. As a case study, a carbon cycle impact assessment was performed for deforestation, reforestation, and afforestation. It was verified that the increase of carbon dioxide in the atmosphere is attributed not only to fossil fuel usage, but also to deforestation, and that even if deforestation is immediately followed by reforestation, it takes very long to return to the initial concentration. The proposed method is expected to be eventually applicable to simulation of potential climate control in the future, contributing to safety verification of various climate engineering techniques.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.240-240
• /
• 2023

홍수시 교각이나 교량 상판에 집적되는 유송잡물은 하천통수단면을 급격히 축소시켜 수위 상승을 일으키고 교량에 가해지는 유수압을 가중시켜 교량 파괴를 발생시킨다. 이러한 흐름의 변화는 교각 기초부의 세굴 깊이와 면적을 증가시키고 교각 및 교량 상판에 대한 유수압을 증가시켜 교량 자체의 안전성을 위협할 뿐 아니라 수위 상승으로 인한 범람 및 인근 구조물 파손 위험도 초래한다. 이에 대한 대책 마련을 위해서는 교량에 유송잡물이 집적된 경우 변화하는 흐름 특성을 파악하고 그에 대한 이해가 먼저 이루어져야 한다. 기존 연구는 교량에 유송잡물이 집적된 경우 발생하는 교각 기초부의 세굴 양상의 변화에만 초점을 두거나, 교량 인근의 국부적 범위에 대한 흐름 특성 변화에만 집중하여 조사한 경우가 대부분이다. 그러나 하천 내 횡단 구조물 특성 변화로 인한 흐름의 변화는 해당 구조물이 위치한 지점뿐 아니라 상하류의 상당한 범위에 걸쳐 지속적으로 해당 구조물 및 주변 시설에 영향을 미칠 수 있다. 본 연구에서는 실험용 개수로에 교량 모형을 설치하여 수리모형실험을 수행하였고 유송잡물로 인한 교량 폐색이 발생한 경우와 그렇지 않은 경우의 두 가지 조건을 고려하였다. 관찰 구간은 유송잡물이 집적된 교량의 상하류에 발생하는 흐름 변화를 상류는 교량 상판 길이의 약 3.33배 떨어진 위치까지 관찰하였으며 하류로는 교량 상판 길이의 10배 떨어진 위치까지 아우르는 구간에 대하여 관찰하였다. 두 가지 경우의 교량 모형에 동일한 흐름 조건을 적용하여 3차원 초음파 유속계를 이용하여 순간유속을 측정하였고, 시간평균유속, 레이놀즈 응력 및 난류 운동 에너지를 계산하여 평균 흐름 및 난류 특성의 변화를 비교 분석 하였다. 수리모형실험을 통해 유송잡물 집적으로 인한 교각 전면부와 후면부에서 하강류의 크기가 약 2배 정도 증가하는 것을 확인하였다.

• Membrane Journal
• /
• v.32 no.1
• /
• pp.23-32
• /
• 2022

Bacteria grow biofilm on various surface such as separation membrane, food packaging film and biomedical device. Growth of biofilm is associated with the formation of a complex structure of exopolysaccharides. Effect of antibacterial effect reduce drastically once the biofilm developed due to the difficulties in mass transport of antimicrobial agent. In order to enhance the antibacterial activity, surface of the membrane is modified, coated or immobilized with functional materials with biocidal properties. One of the idea is to introduce positive charge on the membrane surface by the presence of quaternary ammonium group which might displace divalent metal ion such as magnesium or calcium present in the bacteria cell wall. Efficacy of cell membrane disruption depends on the mobility of the agents available directly on the surface environment. In this review, various biocidal agents like quaternary ammonium group, helamine or zwitter ion containing membrane are discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.161-163
• /
• 2021

This urban centralization is expected to develop rapidly, with 75% of the population living in the city by 2035. Large cities are becoming unsustainable due to side effects such as environmental pollution, severe traffic jams, excessive energy depletion, and destruction of the natural ecosystem. In addition, the happiness index of citizens of large cities is also falling because of high crime rates and safety accidents, the work-life imbalance caused by inequality and polarization, and overly competitive education. To solve this problem, Smart City, an IT-based future city model, was born. The Korean government is also actively attempting to improve urban competitiveness and promote sustainable development through efficient construction and operation of smart cities as a national focus project. To support the effort, we review the basic directions and strategies of Sejong City's Smart City service infrastructure based on the comprehensive national land plan, Smart City plan, and Smart City strategy plan.

• The Journal of Bigdata
• /
• v.7 no.1
• /
• pp.139-171
• /
• 2022

Big Data and the fourth industrial revolution are the first revolution that has not spawned a new form of energy but has triggered a new technological phenomenon called digitization. Digital transformation has caused disruptive innovation, and each country and major corporations need to respond to it. Despite this importance, empirical studies at home and abroad are insufficient. Therefore, in this study, factors affecting the promotion of corporate digital transformation were discovered through literature review, and a research model was developed and empirically analyzed by modifying and supplementing it through a Delphi study. The research model was composed of the main standards such as technology, innovation, organization, and environment and 17 sub-standards by combining the IDT and TOE models. In order to empirically analyze this, the AHP decision-making technique was used for experts in domestic digital transformation promotion companies and business partners. Companies that promote digital transformation will be able to increase the chances of achieving successful digital transformation if they take into account the factors that influence the digital transformation promotion according to the characteristics of the type of industry and company size of the group to which the company belongs.