• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.8-14
• /
• 2003

곡선부가 많은 국내 기존선의 속도향상을 위한 틸팅차량의 개발은 기존선의 전철화에 따른 고속화를 위해 그 필요성이 부각되고 있다. 일반 고속차량과 다른 주행 메카니즘을 가지고 있는 틸팅차량의 주요 기술을 확보하기 위한 틸팅대차와 틸팅시스템의 개발과 연구는 한국철도의 기술력 향상에 큰 역할을 할 것이다. 180km/h급 한국형 틸팅차량의 틸팅 메카니즘 기구동역학 해석을 통하여 틸팅 대차를 형성하는 주요 파라메터들의 변화에 따른 틸팅 메카니즘의 특성과 영향력을 검토한다. 이를 통하여 최적의 틸팅운동을 수행할 수 있는 주요 파라메터의 값을 제시함으로서 틸팅차량이 요구하는 최적의 틸팅 메카니즘을 구현하고자 한다. 이 연구를 통해서 얻어지는 결과들은 팅팅 대차용 엑츄에이터의 성능 설계와 해석의 기반 자료로 사용되어진다.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.455-460
• /
• 2003

180km/h 급 한국형 틸팅차량의 틸팅 메카니즘 기구동역학 해석을 통하여 얻어진 틸팅 대차를 형성하는 주요 파라메터들의 값을 기반으로 틸팅대차용 엑츄에이터의 성능과 용량을 계산하여 설계에 결과를 반영하고자 한다. 승객의 안락감을 유지하기 위해 차체 틸팅 각가속도에 Sine 연속 함수를 적용하여 차체의 틸팅 제어 패턴을 결정하였으며, 이를 통해 차체의 틸팅 각속도와 틸팅각의 패턴을 얻어내었다. 또한 이번 연구를 통해 틸팅 메카니즘의 파라메타를 변화하면서 각각의 틸팅각에 따른 Swing bar 와 엑츄에이터에 작용되는 반발력에 대한 영향력을 분석, 검토하였으며, 이에 따른 엑츄에이터의 출력과 변위 속도등의 변화를 조사하였다. 이러한 결과와 틸팅 메카니즘 기구동력학 해석의 결과를 토대로 틸팅차량이 요구하는 최적의 틸팅 운동을 수행하는 파라메타를 결정하였다.

• Journal of the Korean Society for Railway
• /
• v.8 no.4
• /
• pp.321-329
• /
• 2005

This paper has established the strength evaluation procedure of the bogie frame for the Korean tilting train that is being developed in KRRI, In order to establish the strength evaluation procedure, firstly, the loading conditions imposed on the tilting train were investigated. In addition, the static and fatigue strength of the bogie frame has been evaluated. In order to derive the dynamic loads according to the carbody tilting, the load redistribution effect by carbody tilting, the unbalanced lateral acceleration effect by high-speed curving and the tilting actuator force effect have been considered. Multi-body dynamic analyses have been carried out to evaluate the tilting load cases and the strength analysis has been performed by finite element analyses. From this study, the structural safety of the bogie frame could be ensured.

• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.294-299
• /
• 2003

Using a conventional railway, a tilting train was applied as a means of improving vehicle speed during curve negotiation without any modification of infrastructure. As a study for the optimum design of the tilting mechanism of a tilting vehicle, the kinematics sensitivity of the tilting mechanism was analyzed. Using the geometric relationship of the linkage-type tilting mechanism, the relationship of the parameters and the performance index was defined using nonlinear algebraic equations. With the defined relation, the effect of change in the parameters on the performance was analyzed. The analysis result can be used in the optimum design of a tilting mechanism that considers the track environment, vehicle and operational condition in which the tilting vehicle is applied.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1119-1120
• /
• 2006

고속철도 운행 및 급증하는 철도교통 수요에 대처하기 위해 기존선 속도향상이 요구됨에 따라 180km/h급 틸팅차량을 개발 중에 있다. 일반적으로 곡선부에서 승객들의 승차감을 위해 열차의 통과속도를 제한하지만 틸팅차량은 대차에 틸팅장치를 장착하여 차량의 곡선 통과속도를 향상시킬 수 있다. 곡선부에서 증가된 속도로 이 열차를 주행할 수 있도록 허용할 뿐만 아니라, 운전자의 실수, 고속주행으로 인한 탈선을 예방하기 위해 연속적으로 열차속도를 감시하는 것이 필요하다. 게다가, 기존선의 어떤 구간에서는 엄격한 틸팅의 승인이 있어야 하는 구간이 존재할지도 모른다. 틸팅열차가 열차간 충돌, 터널, 다리, 반대편의 열차와 충돌을 피해만 한다. 이러한 문제점의 해결은 TASS장치의 개발과 설치로 해결될 수 있다. 본 논문은 EMU 타입 틸팅열차에 적합한 TASS 장치의 적용방안을 제시한다.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.130-135
• /
• 2004

The fatigue strength analysis is performed for the bogie frame of Korean tilting train which is newly developed. The loading conditions imposed on the bogie frame during carbody tilting are derived in addition to the loadings based on the JIS E4207 standard. The tilting bogie frame is modeled for the finite element analysis and fatigue analysis is carried out under Goodman equation. It is concluded the bogie frame of the developed tilting train has enough structural safety.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.372-377
• /
• 2004

Tilting bogie system allow the train to pass curve at higher speed without affecting passenger comfort. As the tilting trains offer the optimum means of providing faster and more comfortable rail service with minimum of environmental disturbance and capital investment, mere than 14 countries have now adopted or are about to adopt tilting train technology. The Korean National Railroad is also planing to apply faster tilting train to the areas where the High speed rail service are not provided. This paper describes the parametric study to achieve the optimal suspension parameters of the Bogie for 180 km/h Korean Tilting Train(TTX) from the view point of the vertical and lateral vibration reduction.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.384-388
• /
• 2004

This study presents parametric studies for design of tiling mechanism to be used in 180km/h tilting train. The titling mechanism is composed of 4 links, a tilting bolster and an electro-mechanical actuator. First we have determined the installation height of tilting actuator using 3D tilting bogie modeling. Secondary, we verified movements of the tiling center and train body CG along variation of upper and lower span length. From this study, we obtained the upper and lower span length to minimize the lateral and vertical motion of CG of train body. Finally, we evaluated the tilting actuator force and power required to tilt the train body to $\pm$8$^{\circ}$.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.389-393
• /
• 2004

Tilting bogie system allow the train to pass curve at higher speed without affecting passenger comfort. As the tilting trains offer the optimum means of providing faster and more comfortable rail service with minimum of environmental disturbance and capital investment, more than 14 countries have now adopted or are about to adopt tilting train technology. The Korean National Railroad is also planing to apply faster tilting train to the areas where the High speed rail service are not provided. This paper describes the design and mechanical characteristics of Bogie for 180 km/h Korean Tilting Train(TTX), which was done as a part of the Korean National R&D project.

• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.300-307
• /
• 2003

Using a conventional railway, a tilting train was applied as a means of improving vehicle speed curve negotiation without any modification of infrastructure. In order to achieve the optimal car-body position control through the tilting mechanism, a dynamics analysis was required after the kinematics analysis of the tilting mechanism. For this, the geometric relationship of the linkage-type tilting mechanism was defined. Then, the equations of motion for the half car-body were derived. With the derived equations, the effect of the parameter change on performance was analyzed. The analysis result can be used in the optimum design of a tilting mechanism that considers the track environment, vehicle and operational conditions in which the tilting vehicle is applied.