• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1983.05a
• /
• pp.6.2-6
• /
• 1983

The clinical study of 108 laryngeal mass was observed in our E.N.T. department, and classified clinically and pathologically as below. 1) Among total case of 108 Vocal nodule is 28 (26 %) Vocal polyp is 46 (42.5 %) Laryngeal papilloma is 6 (5.5 %) Laryngeal tuberculosis is 4 (4%) Laryngeal cancer is 24 (22%) 2) The sex ratio of male to female is 5 : 7 in vocal nodule 11 : 12 in vocal polyp 1 : 1 in laryngeal papilloma 3 : 1 in laryngeal tuberculosis 5 : 1 in laryngeal cancer 3) The age distribution is fourth, fifth decade in vocal nodule is fifth, fourth decade in vocal polyp is first decade in laryngeal papilloma is third and seventh decade in laryngeal tuberculosis is sixth and seventh decade in laryngeal cancer 4) The location of mass is between the anterior 1/3 and middle 1/3 of vocal cord in vocal nodule, polyp and papilloma middle 1/3 and posterior 1/3 in laryngeal tuberculosis and glottic (50%), supraglottic (42%), infraglottic (8%) in laryngeal cancer 5) The side of lesion is bilateral in vocal nodule and papilloma, the ratio of right to left is 2 : 3 in vocal polyp 6) The size is 1-2mm in vocal nodule and papilloma, 3-5mm in vocal polyp more than 10mm in laryngeal tuberculosis and laryngeal cancer 7) The duration of symptom is within 1 years in vocal nodule and vocal polyp and laryngeal papilloma, 1-several years in laryngeal tuberculosis and laryngeal cancer 8) The most frequent symptom was hoarseness 9) All laryngeal cancer was sguamous cell carcinoma

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.55-61
• /
• 2005

A rudder roll control system is developed and analyzed to control yawing and rolling motion of ship in irregular waves. The 4-DOF maneuvering equations of motion are derived to carry out the simulation of the motion of a ship and the wave forces are considered as the external forces of a ship in the simulation. The wave forces in the time domain analysis are generated from the frequency transfer function calculated by 3-D source distribution method. The rudder roll control system is developed by linear combination of PD rudder controllers of yawing and rolling motion Rudder rate speed and Schilling rudder are considered to increase roll reduction efficiency.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.216-220
• /
• 2000

Photoluminescence (PL) results of $Si^+$-implanted $SiO_2$films on crystalline silicon are reported. Visible and infrared PL are observed for all the samples. The PL spectrums have about 7000 $\AA$, 7400 $\AA$ and 8400 $\AA$ peak positions. As amount of $Si^+$ ion dose changed, the PL peak positions and intensity are changed. In particular, the PL spectrum has three peaks and more intensity than the other $Si^+$ ion implantation samples for $1{\times}10^{17}/cm^2$ $Si^+$ ion implantation. Not nanocrystal but defects that $Si^+$ ions treated are contributed to the PL spectrum. For the changes of $Si^+$ ion dose and annealing time, O rich radiative defects, Si rich radiative defects, and nonradiative defects control the PL spectrum. We confirmed that more radiative defects can be created by control of $Si^+$ ion dose.

• Journal of Korea Water Resources Association
• /
• v.46 no.5
• /
• pp.547-558
• /
• 2013

Improved methodology of Synthetic Unit Hydrograph (SUH) utilized generally in hydrologic design work was suggested. In this study, regression analysis between peak hydrological data and geospatial data was applied to estimate specific peak flow and peak time for determining shape of SUH. Regression formulas for specific peak flow with respect to shape factors show higher coefficient of determination (0.73~0.81) than the ones with geospatial components only (0.52~0.69). The areal limitation of unit hydrograph application is regarded as 500~700 $km^2$. The validation through rainfall-runoff simulation shows encouraging results that relative error is 1.7~29.0%(Avg. 11.6%) for the case of using SUH developed in this study and 35.0~ 64.9% (Avg. 46.7%) for the SUH in the previous study except for the extraordinary cases.

• Korean Journal of Microbiology
• /
• v.38 no.3
• /
• pp.186-191
• /
• 2002

The usefulness of oligonucleotide DNA chip was evaluated for detection and primary level identification of major waterborne viruses in environmental samples. The enteric waterborne viruses included enterovirus, adenovirus, and rotavirus. Total intracellular RNA of 10 BGM cell plates showing virus-specific cytopathic effects was extracted at the third day after inoculation. The intracellular RNA was then subjected to either enterovirus-specific RT-PCR followed by sequencing analysis, or the DNA chip. Seven out of 10 positive samples in cell culture were positive but the other three sample were turned out to be negative by both RT-PCR and DNA chip analyses. Nucleotide sequencing results and the DNA chip hybridization results of the RT-PCR product were in complete agreement in the identification of the 7 positive samples as enteroviruses. Using the DNA chip, it took only 3∼4 hr to complete detection and primary level identification of target viruses and additional procedures such as gel electrophoresis or nucleotide sequencing were not necessary. We believe that the DNA chip system can be employed as a highly effective and new detection methodology for environmental viruses.

• Korean Journal of Remote Sensing
• /
• v.12 no.2
• /
• pp.111-125
• /
• 1996

A forecast technique using GMS-4(Geostationary Meteorological Satellite) infrared images and its $T_{BB}$ (Brightness Temperature) data to determine the tropical cyclone center and to analyze the tropical cyclone intensity has been developed. First, the determination of typhoon center using $T_{BB}$ distribution pattern is practiced by understanding a special feature of central cloud pattern and cloud band which is analyzed with the method of pseudo coloring. Then, to forecast the intensity of tropical cyclone, a relationship between the central pressure (or maximum wind speed) of tropical cyclone and $T_{BB}$ measured by GMS near the tropical cyclone center was investigated. The results showed a correlation with a high lag relationship between central pressures and $T_{BB}$. The mean Tee in the ring of 200~300km apart from the tropical cyclone center showed the best correlation to central pressure of the tropical cyclone after 24hour. From this relationship, a regression equation to forecast the central pressure (or maximum wind speed) was derived.

• Korean Journal of Plant Resources
• /
• v.17 no.3
• /
• pp.289-296
• /
• 2004

A cDNA clone (GenBank accession no. CF924621) homologous to aluminum induced protein gene was isolated and characterized from Codonopsis lanceolata (ClAIP). The ClAIP is 906 nucleotides long and has an open reading frame of 711 bp with a deduced amino acid sequence of 236 residues. The ClAIP shows high homology to A. marina (84%), G. hirsutum(83%), V. radiata (83%), A. thaliana (80%), B. nap us (78%) and T. aestivum (68%). The deduced amino acid sequence of ClAIP also has homology to the N-terminal end of plant Asn synthetase. This region does not contain the active sites of the enzyme and the significance of this conservation is currently not clear. To investigate the expression of ClAIP against several heavy metal stresses, we treated the sliced tap root of C. lanceolata with various heavy metals. The expression of ClAIP was increased by 25 uM $Al_2$(SO$_3$)$_4$ in proportion to incubation time and also increased by 50 uM CdCl$_2$.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.9
• /
• pp.23-36
• /
• 2006

This study presents the development of a new closed-form analytical solution for the ultimate bearing capacity of an embedded wall in a granular mass. The closed-form analytical solution consists of upper and lower bound solutions (UB and LB). The calculated values from these bound solutions were compared with the author's two-dimensional laboratory wall model loading test and finite element analysis in the plastic region. The comparison showed that ultimate bearing loads from both the model test and finite element analysis are located between UB and LB. In particular, the ultimate bearing load from LB showed good agreement with the ultimate bearing load values from both the model test and finite element analysis. However, the calculated value from the conventional empirical form subjected to plane-strain conditions was shown to be much smaller than the LB.

• Journal of the Korean Society for information Management
• /
• v.40 no.2
• /
• pp.33-57
• /
• 2023

This study aims to analyze students' information needs and information-seeking behavior at science schools for gifted through in-depth interviews. The research design was conducted based on previous studies. Through in-depth interviews, this study examined ten students from six out of eight science schools for the gifted in Korea for information needs and overall information-seeking behavior. The results showed the information needs of students at science schools for gifted in the areas of curricular and extracurricular activities as well as the information-seeking behavior in teaching, learning, and research activities, which were the main topics of interest to students based on the ISP model. Based on these results, we identified the preferred information sources in the information-seeking process and discussed the peculiarities and implications of students' information-seeking behavior. The research is meaningful as it can be used as a basis for further research on the science school for gifted library and as a resource for providing services for students with deep interests and talents in science subject areas.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.1-7
• /
• 2023

The ability of 3D/4D printing technology to create arbitrary 3D structures provides a greater degree of freedom in the design of printed structures. This capability has influenced the field of electronics and biomedical applications by enabling the trends of device miniaturization, customization, and personalization. Here, the current state-of-the-art knowledge of 3D printed electronics and biomedical applications with the unique and unusual properties enabled by 3D/4D printing is reviewed. Specifically, the review encompasses emerging areas involving recyclable and degradable electronics, metamaterial-based pressure sensor, fully printed portable photodetector, biocompatible and high-strength teeth, bioinspired microneedle, and transformable tube array for 3D cell culture and histology.