• Journal of the Korea Concrete Institute
• /
• v.25 no.3
• /
• pp.271-281
• /
• 2013

The current seismic design code prescribes that a structural wall should be designed as a special shear wall when the building height is more than 60 m and its seismic design category is classified as D. However, the use of a special shear wall has a negative effect on constructability and economic efficiency. In the present study, the seismic performance of a special shear wall and a special shear wall with relaxed reinforcement detail was evaluated through a cyclic reversal loading test. The specimens were constructed to measure the results of the experimental variable regarding the reinforcement details of the special boundary element. Next, the seismic performances of a special shear wall structural system and that of a special shear wall structural system with relaxed reinforcement detail was evaluated by methods proposed in the FEMA P695. The cyclic reversal loading test results of this study showed that the performance of the shear wall with relaxed reinforcement detail was almost similar to the performance of a special shear wall and has the performance which requested from standard. The results of the seismic evaluation showed that all special shear walls with relaxed reinforcement detail are satisfied with the design code and seismic performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.240-240
• /
• 2003

V-노치 균열에서 열하중이 작용하는 경우는 비제차형 경계조건의 문제가 되고, 이 조건에 대한 방정식의 일반해를 구하기 위해서 재차형 연립방정식에 대한 일반해(Homogeneous solution)와 비제차형 연립방정식에 대한 특수해(Particular solution)의 두 가지 해를 구할 수 있다. 이들 해는 V-노치 균열에 대한 고유치가 되고 이 고유치가 중복근을 가지게 되는 경우에는 로그항(1n[r])이 나타나게 되고 이 항에 의해서 응력을 무한대로 발산시키므로 이를 대수응력특이성이라 한다. 열하중이 작용할 때 대수응력특이성을 나타내는 로그항의 계수가 영(0)이 되어 대수응력특이성이 사라지게 되므로 V-노치 선단에서의 응력특이성은 고유치와 그에 대한 고유벡터에 의해 결정된다. 본 논문에서는 비정상상태 열하중이 가해지는 등방성 이종재료 내의 V-노치 균열문제에서 패기 각도와 이종재료의 기계적 성질에 의해 결정되는 응력특이성지수를 구하고 이에 대한 응력강도계수를 유한요소해석 프로그램인 ANSYS와 상반일 경로 적분법(RWCIM)을 이용하여 구하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.371-374
• /
• 1999

현재까지 초음파 모터는 소형 경량이면서도 저속에서 큰 출력을 가지며 정확한 위치 제어가 가능하다는 점에서 큰 관심을 끌고 있다. 대부분 회전형 로우터리 모터가 주종을 이루고 있으며 특수한 용도로 초음파 리니어 모터가 일부 사용되고 있다. 본 연구에서는 진행파를 이용하여 쌍방향으로 움직일 수 있는 새로운 구조의 진행파형 초음파 리니어 모터를 설계하고 제작하였다. 설계는 유한요소해석법을 이용하여 구조의 가능성과 진행파가 왜곡되지 않는 최적구조, 계질, 크기, 경계조건을 결정하였다. 그 결과에 따라 리니어 모터를 실제로 제작하여 알루미늄판 위에서 주파수 변화 및 부하질량 변화에 대한 모터의 성능을 측정하였는데, 제작된 모터는 부하질량이 100 g일 때 14.6cm/s로 가장 빠른 속도특성을 보였다. 본 모터는 다양한 정밀위치제어 및 이동 소자로서 활용될 수 있을 것이다.

• Annual Conference on Human and Language Technology
• /
• 2009.10a
• /
• pp.87-91
• /
• 2009

전문용어의 수가 급증하면서 전문용어를 자동으로 인식하는 연구가 활발히 진행되고 있다. 전문용어를 인식하기 위해서 전문용어의 범위를 정한 뒤 그 전문용어의 분야를 선택해야 한다. 본 논문에서는 생물/의학 사전정보와 CRF(Conditional Random Fields) 기계학습 기법을 사용하여 연구를 진행한다. 기계학습을 위한 자질로 품사, 접사, 대소문자, 숫자, 특수문자, 단서어휘 등을 사용한다. 특히 단서어휘와 사전정보를 중요한 요소로 생각하여, 3가지 방법으로 나누어 실험한다. 총 분야의 개수는 7개이며, 각 분야별로 정확률, 재현율, F-measure를 측정한다. 경계인식은 83.92%의 정확률, 96.42%의 재현율, 89.73의 F-measure가 결과로 나타났고, 분야분류는 79.29%의 정확률, 91.06%의 재현율, 84.77%의 F-measure가 결과로 나타났다.

• Land and Housing Review
• /
• v.7 no.1
• /
• pp.31-41
• /
• 2016

In this paper, we propose experimental results, which target the major variables that influence the structural performance of a wall, as well as the resulting seismic and hysteretic behavior. Results also provide the basis for the application of performance based design by identifying the nonlinear hysteretic behavior of the wall with boundary element details recently proposed in previous study by Chun et al(2011). From the experimental results, the crack and fracture patterns of a specimen, which adopt the proposed boundary element details, showed similar tendencies regardless of whether axial force or high performance steel bars is applied. Furthermore, results show that the maximum strength of the specimen can be predicted accurately based on the design equation proposed by the standard. In addition, with a higher axial force, there is a tendency that both the initial load and maximum strength increase as deformation capacity reduces, requiring consideration of the reduced deformation capacity due to a high axial force. For walls under such high axial forces, using high performance steel bars is a very effective manner of enhancing deformation capacity. Therefore, reinforcing the plastic hinge region with boundary elements using high performance steel bars is preferable.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.771-776
• /
• 2008

The main purpose in having a control surface on a ship is to control the motion of it. It is the important element to determine the maneuvering characteristics of the ship. In this paper, the measured results has been compared with each other to predict the performance characteristics of flapped rudder's 2-dimensional section at $Re=3.0{\times}10^4$ using 2-frame grey level cross correlation PIV method. The side force of the rudder could be mainly improved by the lift force at 10 degrees angle of attack and the drag force at 20 degrees angle of attack. The separation point and boundary layer could be controlled by the change of the only flap's angle at 10 degrees angle of attack.

• Land and Housing Review
• /
• v.5 no.2
• /
• pp.57-68
• /
• 2014

As social needs are increasing to minimize the occurrence of external effect due to urban development and to diffuse the benefits of development to surrounding areas, diverse cooperative planning methods are increasingly being discussed. In the long term, laws and systems need to be refined to support cooperative planning, but prior to such development, elements, procedures, and methodologies wherein cooperative planning in U.S.A cases could be implemented were examined to derive the alternative to and implications of cooperative planning that can apply not only to single administrative districts but also to complex boundary new towns being developed by various local governments. This paper surveyed and analyzed the cases of Wisconsin State of the U.S.A, thereby deriving the following implications. First, joint planning areas should be established within the boundary area of various local governments to establish cooperative planning areas in special areas such as complex boundary new towns, and to this end, urban planning means should be prepared. Together with such efforts, to boost the flexibility of cooperative planning, life sphere unit-based planning unit should be established, and a well-organized operation system to activate communities should be prepared. Also, revenues, generated through regional growth, should be distributed to individual local governments through joint tax according to the agreed-upon ratios, and as such, measures to share services and operate joint tax in small-size regions should be secured. Together with such efforts, to establish cooperative governance, measures to manage conflicts through the participation by stakeholders and arbitrators should be prepared from the planning stage, and measures for implementing cooperative planning at the level of basic urban planning should be prepared.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.5
• /
• pp.24-30
• /
• 2009

The Sin-Wol filtration plant was an urban infrastructure and off-limits to the public. It is recreated as a representative experiential theme park in the southwest area. It has not only provided places to relax, but has made a new model of urban park by reusing advantages. The current lack of easy access into the park area almost isolates it like a green island. The neighborhood surrounding the park does not have many physical connections to the park to be able to use it. By connecting the surrounding communities with numerous access points into the park and linking the hiking trails and bike paths, the city's need for open space and recreation would be far better satisfied than before. This would allow for the use of the valuable assets of the existing forest and open space.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.135-141
• /
• 2008

In this paper, we propose colored-hear recognition that distinguishing feature of synesthesia for human sensing by shared vision and specific sense of hearing. We perceived what potential influence of human's structured object recognition by visual analysis through the camera, So we've studied how to make blind persons can feel similar vision of real object. First of all, object boundaries are detected in the image data representing a specific scene. Then, four specific features such as object location in the image focus, feeling of average color, distance information of each object, and object area are extracted from picture. Finally, mapping these features to the audition factors. The audition factors are used to recognize vision for blind persons. Proposed colored-hear transformation for recognition can get fast and detail perception, and can be transmit information for sense at the same time. Thus, we were get a food result when applied this concepts to blind person's case of image recognition.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.10
• /
• pp.61-74
• /
• 2018

In this study, the pull-out behavior of tunnel type anchorage of suspension bridges was analyzed based on results from laboratory size model tests and numerical analysis. Tunnel type anchorage has found its applications occasionally in both domestic and oversea projects, therefore design method including failure mode and safety factor is yet to be clearly established. In an attempt to improve the design method, scaled model tests were conducted by employing simplified shapes and structure of the Ulsan grand bridge's anchorage which was the first case history of its like in Korea. In the model tests, the anchorage body and the surrounding rocks were made by using gypsum mixture. The pull-out behavior was investigated under plane strain conditions. The results of the model tests showed that the tunnel type anchorage underwent wedge shape failure. For the verification of the model tests, numerical analysis was carried out using ABAQUS, a finite element analysis program. The failure behavior predicted by numerical analysis was consistent with that by the model tests. The result of numerical analysis also showed that the effect of Poisson's ratio was negligible, and that a plugging type failure mode could occur only when the strength of the surrounding rocks was 10 times larger than that of anchorage body.