• Title/Summary/Keyword: 특성 모델 검증

Search Result 2,151, Processing Time 0.03 seconds

Study about Power Transformer and Lines Tracing Method based on Power Line Communication Technology (전력선 통신 기술을 활용한 변압기 및 전력선로 추적 방법 개발에 관한 연구)

  • Byun, Hee-Jung;Choi, Sang-jun;Shon, Sugoog
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2016.05a
    • /
    • pp.505-508
    • /
    • 2016
  • In city, tracing of power transmission lines is difficult due to compound installation of overhead and underground lines, transposition, bad view caused by trees or big buildings. It is hard problem for electrical technician on site to trace power transformers or power lines to serve customers in 3 phase -4 wires power distribution systems. It is necessary that the correct and fast tracing method is required for load balancing among distribution lines. Old technology use to trace lines with high power impulse injection. Our proposed method uses to trace lines with very small power high frequency signal injection. Simulation models for 3-phase power transformers, 3-phase wire lines, and customer loads are described to investigate the transmission characteristics of high frequency power line carrier. Distribution lines have only a limited ability to carry higher frequencies. Typically power transformers in the distribution system prevent propagating the higher frequency carrier signal. The proposed method uses the limited propagation ability to identify the power transformer to serve customers. The system consists of a transmitter and a receiver with power-line communication module. Some experiments are conducted to verify the theoretical concepts in a big commercial building. Also some simulations are done to help and understand the concepts by using MATLAB Simulink simulator.

  • PDF

Mass Transfer Analysis of Metal-Supported and Anode-Supported Solid Oxide Fuel Cells (금속지지체형 고체산화물연료전지와 연료극지지체형 고체산화물연료전지의 물질전달 특성분석)

  • Park, Joon-Guen;Kim, Sun-Young;Bae, Joong-Myeon
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.34 no.3
    • /
    • pp.317-324
    • /
    • 2010
  • Metal-supported solid oxide fuel cells (SOFCs) have been developed to commercialize SOFCs. This new type of SOFC has high mechanical strength, but its mass transfer rate may be low due to the presence of a contact layer. In this study, the mass transfer characteristics of an anode-supported SOFC and a metal-supported SOFC are studied by performing numerical simulation. Governing equations, electrochemical reactions, and ceramic physical-property models are determined simultaneously; molecular diffusion and Knudsen diffusion are considered in mass transport analysis of porous media. The experimental results are compared with simulation data to validate the results of numerical simulation. The average current density of the metal-supported SOFC is 23% lower than that of the anode-supported SOFC. However, because of the presence of the contact layer, the metal-supported SOFC has a more uniform distribution than the anode-supported SOFC.

Experimental and Analytical Studies on the Non-Linear behaviors of Pre-Stressed Steel H-Beams (프리스트레스트 H형강 거더의 비선형 거동에 대한 실험적 및 이론적 연구)

  • Kim, Moon-Young;Kim, Nak-Kyung;Oh, Yong-Hwan
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.32 no.6
    • /
    • pp.359-366
    • /
    • 2019
  • Experimental and analytical studies on the behavioral characteristics of a pre-stressed (PS) steel girder are conducted to investigate the effects of deviators on the non-linear inelastic properties of the PS system. In this regard, 4 test specimens consisting of a steel H-beam, a straight cable with eccentricity, anchorages, and deviators are built and failure tests are performed under two-point loading. In addition, in-plane elastic deformation theories for the PS system without a deviator, and with three deviators at regular intervals are analytically formulated and solved using a symbolic calculation technique. To verify the validity of the experimental and the proposed analytical theories, the results obtained using FEM models composed of beam elements, rigid beam elements, and truss cable elements, are compared to the experimental results and the analytical solutions. As a result, it is determined that externally installed un-bonded deviators inhibit flexural deformation of the deformed beam to such an extent that their elastic stiffness, and failure strength are significantly improved compared to those of the PS system without deviators.

A Study on the Construct Building of Service Quality in the International Passenger Terminal (해상여객터미널에 있어서 서비스품질 구성요인 개발에 관한 연구)

  • Kwon, Jae-Hyun;Han, Chul-Hwan;Lee, Su-Ho
    • Journal of Korea Port Economic Association
    • /
    • v.25 no.1
    • /
    • pp.107-124
    • /
    • 2009
  • In order to create value for maritime tourism industry, new port infrastructures have been planned, improvements in passenger terminal services have been designed, and new maritime transport technologies have been applied, so that ports improve their efficiency and the quality of their service more than their national and international competitors. Thus, the purpose of this study is to verify the dimensions of the service quality of ocean passenger terminal. Based on a survey of 260 customers in port of Busan and Inchon, terminal service quality's five main dimensions have been checked regarding their fit with the use of Confirmatory Factor Analysis. Empirical results support that this is a valid instrument for measuring service quality of a ocean passenger terminal. The interactive sequence of computing Cronbach's alpha, corrected item-to-total correlation, and factor analysis was repeated a few times and resulted in a final set of 19 items representing five distinct dimensions-tangibles, responsiveness, knowledge, reliability, and accessibility. This finding provides the more appropriate instrument to evaluate the customers perception as well as to measure the service quality of ocean passenger terminal.

  • PDF

The Characteristics of Undrained Shear Strength for Normally Consolidated Decomposed Weathered Mudstone Soil (정규압밀된 재성형 이암풍화토의 비배수 전단특성)

  • 김영수;김기영;문홍득
    • Journal of the Korean Geotechnical Society
    • /
    • v.18 no.5
    • /
    • pp.7-18
    • /
    • 2002
  • Generally, natural soils are affected by one-dimensional consolidation so that the behavior characteristic could be somewhat different from the isotropic consolidation specimen. But, due to experimental difficulties and the lack of equipment, the isotropic triaxial tests are mainly performed in most lab. tests. So it seems to be very effective if it is possible to predict pore water pressure and undrained shear strength in the $K_o$ state as the results of isotropic triaxial consolidation test. In this study, isotropic triaxial consolidation test and $K_o$ triaxial consolidation test were performed and we obtained parameters related to pore water pressure ratio using the Hyperbolic model. And then we predicted the behavior of pore water pressure that occurred in the $K_o$ state from the results obtained in the isotropic triaxial cosolidation test through the equation suggested by Lo(1969). It is possible to seize the validity of Lo(1969) equation. Also, considering undrained shear strength obtained from consolidation method in relation with water content, we find that consolidation method have an effect on undrained shear strength. Finally, using the Wroth(1984) equation that is based on the theory of critical state, undrained shear strength in the $K_o$ state was predicted from that of the isotropic triaxial consolidation test. The usefulness of the equation was verified by comparing the predicted value with experimental results.

Measuring the Effectiveness of Teaching and Actual Condition of Internet Ethics of the Undergraduate Students (인터넷 윤리의식의 실태 분석 및 교육 효과 측정)

  • Kim, Tae-Hee;Kang, Moon-Seol
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.14 no.5
    • /
    • pp.1257-1269
    • /
    • 2010
  • The internet which is fast spread over all areas of our lives provides us with benefits of efficiency, productivity, and amusement; however, its features as an anonymous and non-face-to-face medium have raised a serious social issue of the collapse of internet ethics due to the abuse of it. Thereupon, the importance of internet ethics education has been highlighted to prevent side effects resulted from the internet and cultivate human-centered internet culture. In this paper, we suggests desirable methods for internet ethics education based on the investigation and analysis of the status of university freshmen's internet ethics. This research conducted a survey and analyzed its result after categorizing the status of internet ethics into the invasion of private information, invasion of intellectual property rights, harmful information, internet communication culture, cyber violence, internet addiction, and internet fraud. And based on the result of analyzing their internet ethics, this paper suggests desirable methods for internet ethics education. Next, internet ethics education was conducted by applying the proposed methods for internet ethics education, and its educational effect was evaluated. According to the result of verifying the educational effect measured statistically, it has proved that the suggested internet ethics education is effective to improve undergraduates' internet ethics.

A Study on Optimal Location Selection and Analytic Method of Landmark Element in terms of Visual Perception (시각적 측면에서 랜드마크 요소의 최적입지선정 분석방법에 관한 연구)

  • Kim, Suk-Tae
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.16 no.9
    • /
    • pp.6360-6367
    • /
    • 2015
  • The location selection of the element that should guarantee easy visual perception, like the landmark, is the a topic that appears much in the design process. Recently, a graph analysis technique using computers has been applied in order to evaluate the visibility of the visual element, but the analytic frame is flat and the setting of the visual pont and the matrix are fixed so there were great limitations in obtaining the results of the practical analysis. Thus, this study presented Nondirectional Multi-Dimensional Calculation (MDVC-N), an analytic methodology available for the analysis of the dynamic visual point in the 3D environment. It thus attempted to establish the analytic application using the 3D computer graphics technology and designed a script structure to set the visual point and the matrix. In addition to that, this study tried to verify the analytic methodology by applying the complex land as an example model, where buildings in various heights of terrains with a high-differences are located, verifying the same analytic methodology. It thus tried to identify the visual characteristics of each alternative location. The following results were gained from the study. 1) The visibility can be measured quantitatively trough the application of the 6-alternatives. 2) Using the 3dimensional graph, intuitive analysis was possible. 3) It attempted to improve the analytic applicability by calculating the results corrected as a variable behavior from the local integration variable of the space syntax.

Free Vibration Analysis of Horizontally Curved I-Girder Bridges using the Finite Element Method (유한요소법을 이용한 수평곡선 I형교의 자유진동해석)

  • Yoon, Ki Yong;Kang, Young Jong
    • Journal of Korean Society of Steel Construction
    • /
    • v.10 no.1 s.34
    • /
    • pp.47-61
    • /
    • 1998
  • The behavior of horizontally curved I-girder bridges is complex because the flexural and torsional behavior of curved girders are coupled due to their initial curvature. Also, the behavior is affected by cross beams. To investigate the behavior of horizontally curved I-girder bridges, it is necessary to consider curved girders with cross beams. In order to perform free vibration analyses of horizontally curved I-girder bridges, a finite element formulation is presented here and a finite element analysis program is developed. The formulation that is presented here consists of curved and straight beam elements, including the warping degree of freedom. Based on the theory of thin-walled curved beams, the shape functions of the curved beam elements are derived from homogeneous solutions of the static equilibrium equations. Third-order hermits polynomials are used to form the shape functions of the straight beam elements. In the finite element analysis program, global stiffness and mass matrix are composed, based on the Cartesian coordinate system. The Gupta method is used to efficiently solve the eigenvalue problem. Comparing the results of several examples here with those of previous studies, the formulation presented is verified. The validity of the program developed is shown by comparing results with those analyzed by the shell element.

  • PDF

A development of Bayesian Copula model for a bivariate drought frequency analysis (이변량 가뭄빈도해석을 위한 Bayesian Copula 모델 개발)

  • Kim, Jin-Young;Kim, Jin-Guk;Cho, Young-Hyun;Kwon, Hyun-Han
    • Journal of Korea Water Resources Association
    • /
    • v.50 no.11
    • /
    • pp.745-758
    • /
    • 2017
  • The copula-based models have been successfully applied to hydrological modeling including drought frequency analysis and time series modeling. However, uncertainty estimation associated with the parameters of these model is not often properly addressed. In these context, the main purposes of this study are to develop the Bayesian inference scheme for bivariate copula functions. The main applications considered are two-fold: First, this study developed and tested an approach to copula model parameter estimation within a Bayesian framework for drought frequency analysis. The proposed modeling scheme was shown to correctly estimate model parameters and detect the underlying dependence structure of the assumed copula functions in the synthetic dataset. The model was then used to estimate the joint return period of the recent 2013~2015 drought events in the Han River watershed. The joint return period of the drought duration and drought severity was above 100 years for many of stations. The results obtained in the validation process showed that the proposed model could effectively reproduce the underlying distribution of observed extreme rainfalls as well as explicitly account for parameter uncertainty in the bivariate drought frequency analysis.

G/T Experts' Recognition on Educating ICT Core-competencies for Gifted Students in Science (과학영재를 위한 ICT 핵심역량 교육에 대한 전문가 인식 조사)

  • Lee, Jaeho;Jin, Sukun;Shin, Hyunkyung
    • Journal of Internet Computing and Services
    • /
    • v.17 no.6
    • /
    • pp.143-152
    • /
    • 2016
  • In this paper, we attempted to provide the bases of effective educational programs for fostering ICT competencies of gifted students in science. For this purpose, we tried to answer the questions like 'What are the ICT core-competence for gifted students in science?' and 'How can we educate those competencies effectively?' We started by reviewing existing studies on ICT competencies for talented people in future society and then adopted one[6] as the basis for further validation. We tried to work with as many G/T experts as possible, and decided to use the online survey methodology because the experts are scattered all over the country. The survey was sent to the corresponding person who is in charge of G/T education in each area, and then e-mailed to G/T experts in that area. Through these procedures, three hundred four(304) G/T experts from all around the country participated in this survey. The results showed the followings: (1) G/T experts agreed with the importance and necessity of ICT competencies for gifted students in science; (2) G/T experts agreed with the validity of three core ICT competencies, which are 'knowledge and skills competence, creativity competence, and characteristic competence,' for gifted students in science; (3) G/T experts agreed with the validity of educational goals, which are suggested for fostering each ICT core-competence of gifted students in science; and (4) G/T experts regarded 'product-oriented education' and 'ICT device-oriented education' as important and effective types of education programs for fostering ICT competencies of gifted students in science.