• Journal of the Korea Computer Industry Society
• /
• v.7 no.3
• /
• pp.155-162
• /
• 2006

Because of their lower cost, higher speed, and longer travel, a belt drive system are quite desirable over screw driven system. However, a belt drive system are inherently difficult to control due to belt flexibility, friction, vibration, backlash and other non-linearities. This thesis presents servo control algorithm and the designing method of controller appliable to a belt drive system. In this paper, a LQ servo controller for a belt drive system is proposed to accomplish an optimal design of improved control system. In this scheme a mathematical model for the control system is obtained in state space form. Finally, the effectiveness of the proposed servo controller was verified through the computer simulation results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1174-1181
• /
• 2005

The exact bit error rate(BER) calculation of an UWB-TH PPM multiple access communication system, which is known to be suitable for the fast transmission of massive information data, is introduced. The statistic feature of the multiple access intereference (MAI) of the system is precisely modeled by the characteristic function technique. The concrete expression for the MAI allows the exact expression for BER to be derived. In addition, we propose the approximate expression for the BER which reveals superior accuracy to the expression from the previous Gaussian approximation of the MAI. The validity of the proposed expressions is confirmed from the comparison of proposed results with the results from Monte-Carlo simulation.

• 한국벤처창업학회:학술대회논문집
• /
• 2017.11a
• /
• pp.117-123
• /
• 2017

본 연구는 '의도(Intention)는 행동을 예측할 수 있다'는 사회 심리학자들의 연구에 근간을 두고 사회적 기업가적 의도(Social Entrepreneurial Intention)에 영향을 미치는 요소들이 무엇인지를 규명하고자 하였다. 그동안 기업가적 의도(Entrepreneurial Intention)에 대한 많은 연구들에서 Ajzen의 계획된 행동이론(Theory of Planned Behavior: TPB)과 Shapero의 기업가정신행동모델(Shapero's Model of the Entrepreneurial Event: SEE)에 근간하여 이루어졌다. 이러한 연구에 기반하여 본 연구는 사회적 기업가정신 맥락에서 사회적 공감(Compassion), 도덕적 의무감(Moral Obligation), 사회적 지지에 대한 인식(Perceived Social Support)이 사회적 기업가적 의도에 영향을 미치는 요소임을 밝히고자 하였다. 본 연구는 자발적으로 사회적 기업가정신 및 기업가정신 과목 수강을 선택한 대학생 271명을 대상으로 하였으며 회귀분석을 통해 가설검증을 하였다. 공감능력(인지적 공감, 정서적 공감, 사회문제 공감)과 주관적 규범으로의 도덕적 의무감은 사회적 기업가적 의도에 영향을 미치며, 외부 환경에 대한 인식 즉 사회적 지지에 대한 인식의 정도에 따라 사회적 기업가적 의도는 영향을 받는 것으로 나타났다. 기존의 사회적 기업가정신에 영향을 미치는 요소들을 규명하는 연구들이 주로 기존 기업가정신 연구에서 사용된 변수를 사용함으로써 사회적 기업가정신의 특성을 잘 설명하지 못한다는 한계를 가지고 있었다. 본 연구는 공감, 도덕적 의무감, 사회적 지지에 대한 인식이 의도(Intention)에 영향요소임을 밝힘으로써 사회적 기업가적 의도 연구 분야에 기여했다고 볼 수 있다. 그러나 사회적 기업가적 의도를 파악하는데 있어서 학생들만을 대상으로 한 것은 본 연구의 한계점이라고 할 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.4
• /
• pp.422-427
• /
• 2003

The purpose of this study analyzes the effects of M＆A between conglomerate and non-conglomerate corporational with 57 samples of firms during the period from 1990 to 1997 right before IMF. financial crisis. These models employed to measure effects of M＆A in this paper are both market model and market adjusted return model using test of t-statistics. Results of this article show that negative excess returns are observed for non-conglomerate mergers and positive excess gains are exhibited for conglomerate mergers. This implies that conglomerate mergers are more effective than firm specialization in terms of merger effects.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.266-269
• /
• 2012

화재 시뮬레이션을 이용하면, 건축물에서 화재가 발생하는 경우 건물에 설치된 감지 시스템 및 자동식 소화설비 등의 작동 여부에 따라 건물 내부의 온도 변화, 산소 및 일산화탄소 농도 변화, 연기유동 현상 등 화재 안전에 관련된 요소를 확인, 분석이 가능하기 때문에 건물의 화재 안전성을 검증하는데 활용할 수 있고 방재시스템 설계 조건을 변경하여 반복 시뮬레이션을 실시함으로써 보다 효율성이 높은 방재 시스템을 설계 및 채택할 수 있다. 또한 화재 시뮬레이션 결과를 감안하여 유사시 효과적으로 대응할 수 있도록 방재계획을 수립할 수 있고, 건축물의 구조, 내장재 및 수용품에 대한 설계, 배치 등에 사용할 수 있으며, 화재사고조사 및 원인 규명에도 활용할 수 있는 등 화재 시뮬레이션의 활용분야는 광범위하다. 최근 국내에도 화재로 인한 인적/물적 피해와 화재 안전 설계에 대한 관심증가로 화재 모델에 대한 많은 연구가 이루어지고 있다. 그러나 대부분의 연구가 시뮬레이션을 이용한 결과 분석에 치중되어있고 화재 시뮬레이션에 관한 특성 연구 및 개발은 거의 이루어지지 않고 있다. 본 자료는 국내에서 화재 시뮬레이션 코드로 많이 알려지지 않았으며, 유럽에서 개발된 SOFIE(Simulation of Fire in enclosures)에 대해서 기초적인 연구를 수행하였으며, SOFIE에 대한 특정 문제나 평가 부분은 다루지 아니하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.107-113
• /
• 2006

The torsion beam axle type is widely used in the rear suspension for small passenger cars due to low cost, good performance, etc. To develop the torsion beam axle, it is necessary to estimate the characteristics of rear suspension from the design process. The characteristics estimation of the torsion beam axle is performed using FEM, dynamic simulation and is verified the real test. In this study, the natural frequency and roll stiffness of the torsion beam axle were measured by FEM, and the reliability of the FE model was evaluated according to the comparison of test data. This study presents a unique method for the finite element modeling and analysis of the torsion beam axle. The results of the FEA were verified using test data.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.267-272
• /
• 2001

The purpose of this study is to suggest the process and calculating method of feasibility study for the reconstruction apartment projects, and the results of this study is fundamental knowledge for the exact and exquisite plan. The process of this study are as following : 1. Research for the process and peculiar character of reconstruction project. 2. Investigate input and output item and suggest the calculating methods that are generally accepted. 3. Suggest the general process on feasibility study for reconstruction apartment project.

• Journal of the Korean Magnetics Society
• /
• v.25 no.6
• /
• pp.203-207
• /
• 2015

This paper introduces a probabilistic analysis method in order to analyze the effect of manufacturing tolerance on induction motor performance occurring in massive production. The univariate dimension reduction method is adapted to predict probabilistic characteristics of a performance function due to certain probabilistic distributions of design variables. Moreover, the sensitivity information on mean and variance of the performance function is estimated, and then the effect of randomness of individual design variables on the probability performance function is analyzed. The effectiveness and accuracy of the method is investigated with a mathematical model and an induction motor.

• Nuclear Engineering and Technology
• /
• v.22 no.4
• /
• pp.315-325
• /
• 1990

The analytical repository source term (REPS) computer code is developed for the safety assessment of radioactive waste geologic repository. For reliable prediction of the leach rates for various radionuclides, degradation of concrete structures, corrosion rate of waste container, degree of corrosion on the container surface, and the characteristics of radionuclides are considered in this REPS code. For the validation of the radionuclide leach rates predicted by the REPS model, the calculated leach rates of Cs-137, Sr-85, and Co-60 are compared with two reported leaching test results. Cesium and strontium leach congruently, and the leaching test results of these species can be reproduced by the congruent leaching model included in the REPS model. In case of cobalt, the solid diffusion model is in good agreement with the leaching test results.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.3
• /
• pp.22-34
• /
• 1996

Regarding the plate bending process by line heating method, in this study a simplified numerical analysis is performed for a beam model to predict its residual deformation and stress distribution. Using the modified strip theory and beam finite element method, a PC-based simulation program is developed for a thermo-elastic-plastic beam. The plate bending problem can be approximately replaced by a beam model using distributed springs to account for the effect of adjacent strips. The spring constants are chosen as the best fit with experiments. In this paper, it is assumed that the temperature distribution is already given and the temperature-dependent material properties are considered. To verify the simulation program, the results using present numerical algorithm are compared with other published experimental results and similar numerical studies. The comparison shows good agreement. The present PC-based computer program also shows good efficiency in computing time.