• Korean Journal of Construction Engineering and Management
• /
• v.17 no.4
• /
• pp.12-19
• /
• 2016

Recently, The importance of modular construction method has increased by market environmental change. However, it's application in the actual project is restricted due to the lack of understanding of modularization and the absence of utilization system. To overcome this problem, this study propose the decision-making model for selecting modular or conventional (stick-built) construction method at early stage. First the needs of modular method in plant project is derived and the benefits and barriers of modular construction are analyzed through literature review. Based on this analysis, 6 decision-making factors covered project and modular characteristics are derived and the decision-making model is developed. Finally, 12 actual overseas project cases is evaluated by this model for verifying its applicability. This proposed model can provide the guideline to select the construction method in early stage for successful execution of plant project.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.681-685
• /
• 2008

Chiral separation of racemic mandelic acid was achieved on a Kromasil KR100-5CHI-TBB column. Some chromatographic parameters (resolution, number of theoretical plates, capacity factor) are calculated under different separation conditions such as changes of mobile phase compositions (hexane/t-BME = 85/15 - 10/90) as well as formic acid concentrations for adjusting pH (0.1, 0.5, 1.0 v/v%). Flow rate versus number of theoretical plates was compared to evaluate column efficiency. To determine the adsorption isotherms, PIM (Pulse Input Method) was carried out. At the concentrations of racemic mandelic acid between 0.1 and 0.3 mg/ml, L- and D-mandelic acids have the same retention times of 8.8 and 9.4 min respectively. Mandelic acid isotherms show a linear form under the concentrations of 0.3 mg/ml with eluent (hexane/t-BME = 75/25). As the concentrations of mandelic acids increase, nonlinear Langmuir isotherms were observed as $C_{S,L}=3.358C_{M,L}/(1+0.0897C_{M,L})$ for L-mandelic acid and, $C_{S,D}=3.692C_{M,D}/(1+0.1457C_{M,D})$ for D-mandelic acid.

• Korean Journal of Environment and Ecology
• /
• v.20 no.4
• /
• pp.407-414
• /
• 2006

This study was carried out to investigate soil properties, ordination, and vegetation of a forest wetland in Jangdo, Sinan-Gun. Peculiar species such as Epilobium pyrricholophum and Lycopus ramosissim us were found in the forest wetland of Jangdo, and Hosta yingeri and Carpinus turczaninovii for coreana that are an endemic species of Korea were also found. The vascular plants of 40 families 62 genera 57 species 9 varieties 1 form, total 67 taxa were accounted for. The communities were classified as Salix koreensis-Isachne globosa community, Isachne globosa community, and Miscathus sinensis var purpurascens community. Soil organic matter, total nitrogen, available phosphorous concentrations, and cation exchange capacity each ranged from 20.6 to 72.4%, 0.74 to 2.13%, 33.3 to 114.6 ppm, and 25.5 to 94.3 me/100g, respectively. Soil pH ranged from 5.10 to 5.42. Soil texture was clay loam. Results of the correlation between Jangdo forest community and environmental factor are as follows; Soil pH was the most effective factor for plant community distribution. The Salix koreensis-Isachne globosa community was found where it had the highest soil organic matter, nitrogen, and exchangeable Na, Ca, Mg concentration, ana CEC among the three communities. Miscathus sinensis var. purpurascens community was found where it had the lowest soil organic matter, nitrogen, and exchangeable Na, Ca, Mg concentration, and CEC among the three plant communities.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.43-59
• /
• 2017

This study presents the prediction methodology of debris flow occurrence areas using the SINMAP model. Former studies used a single calibration region applying some of the soil test results to predict debris flow occurrence in SINMAP model, which couldn't subdivide the soil properties for the target areas. On the other hands, a multi-calibration region using a detailed soil map and soil strength parameters (c, ${\phi}$) for each soil series to make up for limitation of former studies is proposed. In this process, soils with soil erodibility factor (K) are classified into three types: 1) gravel and gravelly soil. 2) sand and sandy soil, and 3) silt and clay. In addition, T/R estimation method using mean elevation of target area instead of T/R method using actual occurrence time is suggested in this study. The suggested method is applied to Seobyeok-1 ri area, Bonghwa-gun where debris flow occurred. As a result of comparison between two T/R estimation method, both T/R estimations are almost equal. Therefore, the suggested methodologies in this study will contribute to set up the national-wide mitigation plan against debris flow occurrence.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.5
• /
• pp.497-504
• /
• 2013

This research uses numerical analysis to examine the tunnel portal landscape affecting the brightness level of interior lighting when designing lights for road tunnels through the L20 method. In order to extract the brightness recognition per form of a tunnel entrance and to evaluate the effects of the characteristics of the materials of facilities near a tunnel portal, brightness analysis was conducted by filming brightness on a video photometer called Hi-land Elf System, and a surface brightness photometer called LMK Mobile Advanced. Tunnels in Korea are mostly distributed in mountain areas; thus, the ratio occupied by the sky, which has the highest brightness within the angle of L20, is close to zero, while most of the ratio was occupied by brightness by the area near the tunnel entrance or road surface. However, for a tunnel portal retaing wall, which allows the width of a tunnel entrance to seem wider within the L20 angle, appeared to be have higher brightness compared to nearby areas or the surface, which is an element increasing the tunnel portal brightness within the tunnel, and the road facilities near the tunnel portal appeared to have an effect on the brightness as well. Thus, when designing tunnel lights based on brightness, the form of the tunnel entrance and the area width, material, and color of areas near the tunnel portal appeared to affect outside brightness and become an element affecting the establishment of the brightness level of the interior lights of tunnels. Consequently, reviewing such matters is a prerequisite when designing tunnel portal landscape.

• Journal of the Korean Magnetics Society
• /
• v.19 no.3
• /
• pp.113-119
• /
• 2009

$^{57}Fe_xCu_{1-x}O$(x = 0.0, 0.02) powders were prepared by sol-gel method and their crystallographic and magnetic hyperfine properties have been studied using X-ray diffraction and $M{\ddot{o}}ssbauer$ spectroscopy (MS). The crystal structure of the samples is found to be monoclinic without any secondary phases and their lattice parameters increase with increasing annealing temperature ($T_A$), which is attributed to an increase in oxygen-vacancy content. MS measurements at room temperature indicate that $Fe^{3+}$ ions substitute $Cu^{2+}$ sites and ferromagnetic phase grow with increasing $T_A$. Magnetic hyperfine and quadrupole interactions of $^{57}Fe_{0.02}Cu_{0.98}O$ ($T_A=500^{\circ}C$) in the antiferromagnetic state at 17 K have been studied, yielding the following results: $H_{hf}=426.94\;kOe$, ${\Delta}E_Q=-3.67\;mm/s$, I.S.=0.32 mm/s, ${\theta}=65^{\circ}$, ${\phi}=0^{\circ}$, and ${\eta}=0.6$.

• Journal of the Korean Magnetics Society
• /
• v.24 no.3
• /
• pp.76-80
• /
• 2014

Toroidal cores made of metallic powder requires large magnetic field strength up to few decade kA/m to obtain major hysteresis loop. To overcome thermal heat generation problem from large exciting current during measurement, we have employed a real time hysteresis loop tracer which can digitize and calculate B-H signals in personal computer as real time. For example, when we magnetize specimen at 10 Hz frequency, we could display hysteresis loops 10 times per second. Using the real time hysteresis loop tracer, we could measure major hysteresis loop of toroidal shape metallic powder core at maximum flux density or maximum magnetic field strength to be measured within 5 second not to significant increasement of specimen temperature due to the heat dissipation from coil windings. For the constructed hysteresis loop tracer, we could measure hysteresis loop at magnetic field strength higher than 50 kA/m for the toroidal shape specimen.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.270-280
• /
• 2014

In this study, to examine the causes of cracks in continuously reinforced concrete tracks (CRCTs) and the main factors affecting cracking, a field survey on the status of cracks and crack patterns in the Gyeong-bu high speed line was conducted, and the crack patterns of CRCT due to the temperature difference between the top of the slab (TCL) and the bottom of the subbase (HSB) and the drying shrinkage of concrete were predicted by a nonlinear finite element model considering the structure of CRCT. The results of the numerical analysis show that cracks will be developed at the interface between the sleeper and the TCL, and under the sleeper due to the temperature difference and concrete shrinkage. This corresponds well to the crack locations found in the field. Also, it is found that the most significant factors are the coefficient of thermal expansion with respect to the temperature difference, and the drying shrinkage strain with respect to shrinkage. According to the results, the reinforcement ratio should be carefully determined considering the structures of CRCT because the crack spacing is not always proportional to the reinforcement ratio due to the sleepers embedded in the TCL.

• Korean Business Review
• /
• v.13
• /
• pp.179-193
• /
• 2000

It is not simple to manage software quality, because software development process and product itself are very complex. Recently ISO/IEC 15504- international standard for software process improvement, capability determination and development - was completed and applied to many local trials, and their results are being reported as registered local trials. The first step of software process assessment is established by examining whether its base practices are performed and which level they are achieved. And as far as assessment responsibility and credibility are concerned, assessment is generally performed by team-based assessors. Therefore assessment team construction and its preference of practice importances have a great effect on the credibility and the objectivity of assessment. In this paper, we analyse a SPICE-based software process assessment trial by comparing base practice importances of assessed processes, which are expressed through a real assessment, with its final rating results. Survey data are collected from assessors and interviewees who were engaged in the SPICE trial that was performed by ISO/IEC 15504, and final data analysis are derived from the factor analysis method. It is convinced that the result of this paper is able to enhance the credibility of software process assessment by provisions of objective and rational criteria and preference information for assessment team construction and base practice importances in future.

• Journal of agricultural medicine and community health
• /
• v.41 no.3
• /
• pp.129-139
• /
• 2016

Objective: The purpose of this study was to identify the predictors and frailty level in the frail elderly receiving home visiting health care services. Methods: The subjects were 177 frail elders aged over 65 registered in the home visiting health care services of three public health centers in Daegu. The data collection was performed from June 9 to June 24, 2015. This study used descriptive statistics, t-test, ANOVA, scheffe test and stepwise multiple regression by SPSS Win 18.0 program. Results: The mean of the frailty score was 10.05 (${\pm}4.52$). Age and life satisfaction were the significant factors related to the frailty score in frail elderly. Health promotion behavior, empowerment, social participation and perceived health status had a negative correlation with the frailty score. Thirty seven point four percent of the variance in the frailty score can be explained by perceived health status (${\beta}=-0.398$, p<0.001), health promotion behavior (${\beta}=-0.251$, p<0.001) and age (${\beta}=0.232$, p<0.001)(Cum $R^2=0.374$, F=25.744, p<0.001). Perceived health status was the most important factor related to the frailty score in our study. Conclusions: An integrative care program which includes these significant variables of subjects is essential to prevent the deterioration of frailty in frail elderly.