Abstract
This study presents the prediction methodology of debris flow occurrence areas using the SINMAP model. Former studies used a single calibration region applying some of the soil test results to predict debris flow occurrence in SINMAP model, which couldn't subdivide the soil properties for the target areas. On the other hands, a multi-calibration region using a detailed soil map and soil strength parameters (c, ${\phi}$) for each soil series to make up for limitation of former studies is proposed. In this process, soils with soil erodibility factor (K) are classified into three types: 1) gravel and gravelly soil. 2) sand and sandy soil, and 3) silt and clay. In addition, T/R estimation method using mean elevation of target area instead of T/R method using actual occurrence time is suggested in this study. The suggested method is applied to Seobyeok-1 ri area, Bonghwa-gun where debris flow occurred. As a result of comparison between two T/R estimation method, both T/R estimations are almost equal. Therefore, the suggested methodologies in this study will contribute to set up the national-wide mitigation plan against debris flow occurrence.
본 연구에서는 SINMAP 모형을 이용한 토석류 발생지역에 대한 예측기법을 보여준다. 기존의 연구들은 토석류 발생을 예측하기 위해서 일부 토질시험 결과를 적용한 단일보정영역을 사용하였으나 이는 대상유역의 토질 특성을 세분화할 수 없는 문제점이 있다. 반면, 본 연구에서는 기존 연구의 문제점을 보완하기 위해서 정밀토양도와 토양통별 토질강도정수(c, ${\phi}$)를 이용하여 다중보정영역을 적용하는 방법을 제안하였다. 이 과정에서 토질은 토양침식성 인자(K)를 이용하여 1) 자갈 및 자갈질 흙, 2) 모래 및 모래질 흙, 그리고 3) 실트 및 점토질의 세가지로 분류하였다. 또한, 본 연구에서는 토석류 발생시점을 알고 있는 경우에만 T/R의 추정이 가능한 기존의 방법 대신 고도평균값을 이용하는 T/R 산정 방법을 제안하였다. 기존방법과 제안방법을 실제 토석류가 발생한 봉화군 서벽 1리에 적용하여 산정된 T/R 값들은 거의 일치하였다. 따라서 본 연구에서 제안한 토석류 발생지역 예측을 위한 방법론은 전국적인 토석류 발생위험 대비에 기여할 수 있을 것으로 기대된다.