• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.405-413
• /
• 2007

Effect of design factors on the performance of vacuum system was simulated for optimum design of system. In this investigation, the feasibility of modelling mechanism for $VacSim^{Multi}$ simulator was proposed. Simulation results of pumping design factor showed the possibilities of simulation fore-study for the detailed design factors. Simulation of roughing pump presented the expected pumping behaviors based on the specifications of commercial pump. Application of booster pump exhibited the high pumping efficiency for middle vacuum range. Combinations of optimum backing pump for diffusion and turbo vacuum system were obtained. And, the characteristics of process application of both systems were also acquired.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1353-1354
• /
• 2015

본 연구에서는 관측자료 기반의 안개 예보를 수행하기 위해 특징선택을 이용한 SVR 회귀분석 기반 시정 예측 가이던스를 개발하였다. 예측에 필요인자를 사전에 선택하는 유전알고리즘 기반의 최적화 방법을 적용하여, 관측된 여러 기상인자의 입력인자 중 실제 시정을 예측하기 위한 입력인자를 선택하여 준다. 지점별 안개발생에 필요한 입력인자 및 예측 모델을 구성하여 통합적인 예측 모델이 아닌 각 지점에 최적화된 정보를 제공할 수 있도록 예측을 수행한다. 자료의 수집 특성상 3시간 간격으로 3시간 예보를 위한 시정을 예측하고, 예측 모델의 검증을 위해 현업의 수치모델 기반의 시정예측 정보와의 비교를 통해 실제 안개 시점에 대해 비교 분석하였고 그 결과를 통해 긍정적인 효과를 보였다. 예측모델을 적용하여 지도에 예측시정 정보를 제공하는 표출 시스템을 통해 실시간 가이던스를 제공하고자 연구를 수행하였다.

• Water for future
• /
• v.14 no.3
• /
• pp.37-46
• /
• 1981

The purpose of this paper is to provide a method of estimating the magnitude and frequency of floods on five major streams in Korea such as the Han, the naktong, the Geum, the Seomjin and the Yeongsan. Derivation of the flood frequency formulae is based on the multiple correlation method. For each gaging station in the region, flood frequency curves are drawn by GumbelChow and Weibull plot. where 24 gaging stations are selected for this study. After the station flood-frequency cruves have been prepared, discharges are read at selected recurrence intervals. Each set of discharges is then correlated with basin parameters, using regression equation. The basin parameters that are considered include drainage area, length of main stream, shape facotr, mean basin slope and main channel slope.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.4
• /
• pp.385-391
• /
• 2006

The estimated decommissioning cost of nuclear research reactor is calculated by applying a unit cost factor-based engineering cost calculation method on which classification of decommissioning works fitted with the features and specifications of decommissioning objects and establishment of composition factors are based. Decommissioning cost of nuclear research reactor is composed of labor cost, equipment and materials cost. Labor cost of decommissioning costs in decommissioning works are calculated on the basis of working time consumed in decommissioning objects. In this paper, the unit cost factors and work difficulty factors which are needed to calculate the labor cost in estimating decommissioning cost of nuclear research reactor are derived and figured out.

• Solar Energy
• /
• v.14 no.2
• /
• pp.3-16
• /
• 1994

The major objectives of the study are to suggest the optimal basic design conditions for the horizontal storage tank system. For this purspose computer simulation has been carried out to find the characteristics of flow patterns in horizontal storage tank, and experiments have been carried out for the duration of one turnover, Experimental parameters are volume flow rate(1 LPM to 4 LPM), amount of heat generated from heat sources(0 W to 100 W), and inlet and outlet port types of the storage tank(DD type, DO type, ID type, IO type).

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.673-687
• /
• 2023

Exploratory data analysis is the process of observing and understanding data collected from various sources to identify their distributions and correlations through their structures and characterization. This process can be used to identify correlations among conditioning factors and select the most effective factors for analysis. This can help the assessment of landslide susceptibility, because landslides are usually triggered by multiple factors, and the impacts of these factors vary by region. This study compared two stages of exploratory data analysis to examine the impact of the data exploration procedure on the landslide prediction model's performance with respect to factor selection. Deep-learning-based landslide susceptibility analysis used either a combinations of selected factors or all 23 factors. During the data exploration phase, we used a Pearson correlation coefficient heat map and a histogram of random forest feature importance. We then assessed the accuracy of our deep-learning-based analysis of landslide susceptibility using a confusion matrix. Finally, a landslide susceptibility map was generated using the landslide susceptibility index derived from the proposed analysis. The analysis revealed that using all 23 factors resulted in low accuracy (55.90%), but using the 13 factors selected in one step of exploration improved the accuracy to 81.25%. This was further improved to 92.80% using only the nine conditioning factors selected during both steps of the data exploration. Therefore, exploratory data analysis selected the conditioning factors most suitable for landslide susceptibility analysis and thereby improving the performance of the analysis.

• Current Research on Agriculture and Life Sciences
• /
• v.32 no.2
• /
• pp.85-89
• /
• 2014

This study uses turbidity and rheological measurements to examine the effects of the molecular weight (MW), substitution type and substitution degree of cellulose ether and water content on the cooking characteristics of rice noodles, the turbidity of the cooking solution, and the compression strength of the cooked noodles. When increasing the MW of cellulose ether and water content, the turbidity decreased, thereby improving the morphological stability of the rice noodles during cooking. Thus, when controlling the above factors effectively, the rice noodle cooking solution had a lower turbidity than with wheat noodles. Measuring the compression strength of the rice noodles using a rheometer was also effective for examining the pasting characteristics of the rice noodles and texture changes during cooking. As a result, the water content and MW of cellulose ether were found to affect the pasting characteristics and texture of the rice noodles more than the other factors examined.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1284-1290
• /
• 2004

In market-basket analysis, weighted association rule(WAR) discovery can mine the rules which include more beneficial information by reflecting item importance for special products. However, when items are divided into more than one group and item importance for each group must be measured by different measurement or separately, we cannot directly apply traditional weighted association rule discovery. To solve this problem, we propose a novel methodology to discovery the weighted association rule in this paper In this methodology, the items should be first divided into sub-groups according to the properties of the items, and the item importance is defined or calculated only with the items enclosed to the sub-group. Our algorithm makes qualitative evaluation for network risk assessment possible by generating risk rule set for risk factor using network sorority data, and quantitative evaluation possible by calculating risk value using statistical factors such as weight applied in rule generation. And, It can be widely used for new model of more delicate analysis in market-basket database in which the data items are distinctly separated.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.282-282
• /
• 2017

모래, 실트 및 자갈과 같은 비점착성 유사는 하천에서의 이동 형태에 따라 소류사와 부유사로 구분된다. 부유사는 난류로 인해 흐름 내에서 부유 상태로 이동하는 유사로, 대부분의 자연 하천에서 유사는 부유사 형태로 이송된다. 유수동역학적 조건 하에서 이동하는 부유사의 입도 분포는 유사 입자의 부유와 퇴적에 따라 불규칙적으로 변화하기 때문에 여러 연구에서 주요한 문제로 다뤄지고 있다. 부유사의 입도 분포는 흐름 유속, 부유사의 부유 높이, 하상 재료의 특성 등에 따라 변화하며, 로그 정규분포를 따르는 것으로 알려져 있다. 이에 본 연구에서는 여러 다양한 하천 흐름 조건에서 부유사의 입도 분포를 모의할 수 있는 입도 분포 모형에 관한 개념적 틀(Framework)을 제안한다. 유사 입자의 입도 분포 모의는 추계학적 방법의 적용을 통해 얻어진다. 본래 점착성 유사의 입도 분포를 모의하기 위한 추계학적 입도 분포 모형으로부터 제안된 개념적 틀로, 다양한 흐름 조건 하에서 특정 확률 분포형을 띠는 입도 분포를 모의할 수 있다. 점착성 유사의 이동 모형에서는 점착성을 띠는 유사 입자들의 응집 현상에 따른 크기 변화를 모의하기 위한 응집 모형이 필수적이다. 시간에 따른 크기 변화를 모의하는 응집 모형에서, 흐름 내 여러 특성들에 의해 결정되는 응집 인자와 달리 파괴 인자의 경우 불규칙적 난류 운동으로 인해 무작위한 특성을 띤다. 모형에서 요구되는 파괴 인자를 특정 확률 분포형을 띠는 난수로 고려함으로써 점착성 유사의 입도 분포 모형이 개발되었다. 이 때, 점착성 유사는 프랙탈 구조를 가지는 것으로 가정하기 때문에 크기에 따라 밀도와 침강 속도가 변화한다. 반면 비점착성 유사는 크기에 따른 밀도 변화가 일어나지 않으므로, 고정된 밀도와 프랙탈 차원을 적용하여 점착성 유사의 입도 분포모형으로부터 비점착성 유사의 입도 분포 모의가 가능할 것으로 판단된다. 이러한 추계학적 방법의 적용을 통해, 하나의 경계 조건으로 대변되는 하상 특성에 따른 단점 또한 보완될 것으로 예측된다. 예를 들어 로그 정규 분포를 띤다고 가정할 때 보정을 통해 결정해야하는 변수는 평균과 분산으로 두 개가 요구된다. 유사의 평균 크기로부터 확률분포형의 평균값이 결정되면, 하상에 존재하는 유사의 특성에 따른 입도 분포의 분산은 난수의 분산을 결정함으로써 모의할 수 있다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.6
• /
• pp.78-84
• /
• 2020

The performance of pintle thruster is analyzed by using the pintle thruster performance analysis model which integrating the element models introduced in Part I. To verify the performance analysis, the results of the developed program are compared with the experimental data of kerosene/hydrogen peroxide liquid pintle thrusters. Based on the results, the characteristics of the pintle thruster are analyzed. The sensitivity analysis is performed to investigate the effect of thruster shape and operation parameters on performance characteristics using both OAT and scatter plot methods. The four performance parameters such as droplet diameter, film flow rate, O/F ratio, and nozzle throat diameter are evaluated to investigate their effects on characteristic speed, combustor pressure, and specific thrust.