• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.6 s.97
• /
• pp.603-614
• /
• 2005

In this paper, digital ultra-narrowband Walky-Talky using direct conversion method for CQPSK modulation scheme is implemented with satisfying the requirements of APCO P25. RF transceiver design and implementation scheme that minimize the influence of DC-offset and AC-coupling at ultra-narrowband is proposed. This scheme also minimizes the influence of nonlinear characteristic at power amplifier fir CQPSK modulation method. Test results of full system including DSP module and direct conversion RF transceiver show that FCC emission mask at 36.8 dBm PEP meets the standard requirements. The characteristic of receiver AGC by PWM control signal is linear at 40 dB dynamic range and voice communication at input power level of -116 dBm is successful. Also it is verified that the performance of BER versus frequency offset and versus SNR meets the standard requirements.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.499-506
• /
• 2015

Global navigation satellite systems (GNSS) is operating widely in civil and military area. GNSS signals, however, can be easily interfered because its signal is vulnerable to jamming. Thus, a sort of backup or alternative system is needed in order that the navigation performance is assured to a certain degree in case of GNSS jamming. In order to suggest a series of backup or alternative system of regional navigation, in this paper, we introduced a high altitude long endurance unmanned aerial vehicle (HALE UAV) with pseudolites using inverted GPS and transceiver system. We simulated the positioning error of the regional navigation system using HALE UAV with inverted GPS or transceivers concepts. We estimated the position error of HALE UAV calculate user position errors based on the position error of HALE UAV and general pseudorange error.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.638-646
• /
• 2005

In recent wireless communications, direct conversion transceiver or If sampling SDR-based receivers have being designed as an alternative to conventional transceiver topologies. In direct conversion receiver a.chitectu.e, the 1.equency/phase offset between the RF input signal and the local oscillator signal is a major impairment factor even though the conventional AFC/APC compensates the service deterioration due to the offset. To rover the limited tracking range of the conventional method and effectively aid compensation scheme in terms of I/Q channel imbalances, the frequency/phase offset compensation in RF-front end signal stage is proposed in this paper. In RF-front end, the varying phase offset besides the fixed large frequency/phase offset are corrected by using early-late phase compensator. A more simple frequency and phase tacking function in digital signal processing stage of direct conversion receiver is effectively available by an ingenious frequency/phase offset tracking method in RF front-end stage.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1038-1041
• /
• 2009

Wireless sensor network with wireless sensor nodes which equipped with temperature, humidity, illumination, or soil sensor etc, get a natural environment information and analyze and utilized variety way.these network consist of a short distance wireless communication and multi-hop techniques with multiple nodes equipped low-power wireless transceivers. so the characteristic of the data collected through the wireless sensor network is obtained from compact nodes within a limited range. However, to get a data from the wireless sensor nodes scattered in a wide range, this network needs a wireless transceiver that consumes many power or a lot of intermediate nodes. then, merit of low cost and low electrical energy decrease. To solve this problem, this paper offers environment monitoring system using autonomous mobile robot that collect data from groups of each sensor networks scattered widely.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.5
• /
• pp.64-71
• /
• 2009

Cylindrical lens core for optical transceiver was designed and machined. With the lens design data, WC asymmetric core surface data were generated for non-revolutional ultra-precision grinding. Grinding process for optimum machining conditions of target surface was studied in terms of surface roughness and form profile. We used experimental results to optimize turbine speed, feed-rate and depth of cut with durable grinding wheel wear. Ground WC cores were measured contact type profilers and verified.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.112-114
• /
• 2002

본 논문에서는 방향성 안테나를 사용하는 이동 노드들로 구성된 애드 혹 네트워크에서의 새로운 매체 접근 제어 프로토콜을 제안한다. 고려된 네트워크에서는 단일 채널이 사용되며, 각각의 노드는 하나의 트랜시버와 m개의 방향성 안테나를 사용하며 특정 안테나를 필요시 on/off할 수 있다고 가정한다. 제안된 프로토콜은 은닉 단말기 문제를 해결하여 서로 다른 노드로부터 동일 노드로 전송되는 사용자 데이터 프레임의 충돌을 방지하는 한편, 노출 단말기 문제를 해결하여 이웃한 노드들이 서로 다른 노드들로 사용자 데이터 프레임을 동시에 전송 또는 수신할 수 있다. 네트워크 이용도에 있어서도 단일 채널 애드 혹 네트워크의 매체 접근 제어 프로토골 중 가장 우수한 것으로 알려진 DBTMA보다도 최대 25%정도 향상되었다.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.3
• /
• pp.138-143
• /
• 2009

다양한 서비스에서 활용되는 USN환경에서 각 응용의 기술적 특성에 따른 다양한 프로토콜기술의 개발이 이루어지고 있다. 본 논문에서는 무선 센서 네트워크 프로토콜 개발에 필수인 프로토콜 분석기에 대한 것으로 8개(최대 16개) 트랜시버를 갖는 하드웨어를 통해 무선 상의 여러 채널을 통해 송수신 되는 다양한 프로토콜을 쉽게 분석하는 장치의 구현에 대해 설명한다. 종래의 기술은 Zigbee프로토콜과 같은 특정한 프로토콜 및 하나의 채널만을 대상으로 분석하여 화면에 출력하는 기술인 것에 비하여, 본 기술은 여러 개의 채널을 동시에 분석이 가능하며, 동시에 여러 개의 채널을 통해 패킷을 인코딩하여 출력이 가능하다. 또한 하드웨어 및 소프트웨어의 코드를 바꾸지 않고 XML을 활용하여 사용자 정의에 따른 프로토콜 분석 및 처리, GUI처리 등을 가능하게 한다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.177-179
• /
• 2003

본 논문에서는 $0.35{\mu}m$ CMOS 공정을 이용하여 2.5 Gbps로 동작하는 광 송수신기를 설계하였다. 광 송수신기의 구성을 보자면, 전기 신호를 빛 신호로 전환하여 주는 레이저 다이오드(LD) 구동부와 레이저 다이오드에서 나오는 빛 신호를 수신하여 이를 다시 전기 신호로 바꿔주는 포토 다이오드(PD) 구동 부분으로 구성된다. LD 구동부는 LD의 문턱전류 이상을 공급하는 바이어스 부분과 신호레벨의 모듈레이션 전류를 공급하는 부분으로 구성된다. 디자인된 송신기는 바이어스 전류를 10 mA 정도 공급하여주며, 모듈레이션 전류를 15 mA 정도 공급한다. 수신기는 current decision 부분과 output buffer 부분으로 구성되어 PD로부터 나오는 전류를 다시 디지털 레벨의 전압신호로 바꾸어 주며 디자인된 수신기는 넓은 동작 영역을 가진다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.139-142
• /
• 2000

In this paper, we designed a Self-Oscillating mixer(SOM) for Microwave Transceiver. Implemention of SOM shows the output power of 4.33dBm at 10.750Hz and the phase-noise of -102dBc/Hz at 100KHZ offset frequency, Applying the input frequency band 11.7GHz∼12.9GHz, The designed SOM If frequency is 950MHz∼2150MHz and its conversion gain is 6dB in the If band. We convinced that SOM is applied to a digital transceiver down-converter

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.4 s.32
• /
• pp.179-184
• /
• 2004

Meter reading system, operated by meter staff who reads the meter and record consumption with handhold data terminals. can cause privacy intrusion, unread meter data, abnormal readings and excessive expenses of maintaining the system. To prevent the deterioration of customer service quality, Automatic Meter Reading system, which automatically recognizes meter readings and transmit reading data through wireless RF module, is designed. From collecting the reading data to managing statistics of customer's consumption information. this automatic meter reading system provides more accurate and fast information to customers. By designing this system, customer service satisfaction and reliability can be improve