• Transactions of The Korea Fluid Power Systems Society
• /
• v.6 no.1
• /
• pp.1-9
• /
• 2009

This study presents an analytical model of an automotive steering hose containing tuner(flexible spiral metal tube) to reduce the ripple pressure induced by steering vane pump. The double-wall side branch composed in a steering hose containing tuner was analogically considered as a filter in a conduit. Specialized test equipment was manufactured for the estimation of speed of sound in a conduit and measurement of amplitude ratio between the propagated ripple pressures of inlet and outlet of the steering hose. Experimental data of entire frequency ranges can be obtained through the test once in short time. The results of three points' measurement method and cross-correlation method to estimate the speeds of sound in a hose, tuner, and side branch respectively reveal that cross-correlation method can be used practically. The results of simulation and experiment were so close, especially in the range of engine idling speed, that the proposed analytical model in this study was validated. Sensitivity analyses and experiments show that longer tuner is preferable, and that the positive-positive composition of the steering hoses containing tuner is superior to others to attenuate ripple pressure.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.195-196
• /
• 2007

Since the digital TV signal band is very wide ($54{\sim}806MHz$), the VCO used in the frequency synthesizer must also have a wide frequency tuning range. Multiple LC VCOs have been used to cover such wide frequency band. However, the chip area increases due to the increased number of integrated inductors. In this paper, a scheme is proposed to cover the full band using only one VCO. The RF VCO block designed using a 0.18um CMOS process consists of a wideband LC VCO, five divide-by-2 circuits and several buffers. The simulation results show that the designed circuit has a phase noise at 10kHz better than -87dBc/Hz throughout the signal band and consumes 10mA from a 1.8V supply.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.11a
• /
• pp.39-40
• /
• 2015

방송망의 효율적인 관리 및 운영을 위해 다양한 측정 및 모니터링 방법이 제안되고 있다. 특히 디지털 방송신호의 특징상 송신 장비의 열화가 진행되더라도 수신 장비의 채널 복호 및 오류정정, 다양한 형태의 페이딩(fading) 간섭으로 인해 이를 정확히 파악하기 어렵다. 또한 운영 인력의 축소, 관리 대상 매체의 증가 등 방송사의 인력관리의 문제등도 감안할 때, 다양한 매체의 종합적인 품질 관리를 위해서는 집약적이고 시간 지속적인 측정방법의 도입이 필요하다. 본 논문은 이러한 다매체 다채널 방송 환경에서 효율적인 측정 및 모니터링을 위해 집적화된 형태의 방송 모니터링 시스템의 구현 방법을 제안한다. 제안하는 시스템은 다양한 매체의 튜너를 하나의 제어기에 연결하고 이를 스케줄링 기법에 의해 순차적으로 측정한 후 방송 품질의 핵심 파라미터 측정결과를 네트워크를 통해 원격 서버로 전송한다. 이를 통해 단기 및 장기모니터링을 실시할 수 있으며, 일간, 월간, 연간 신호의 변화를 종합적으로 측정 및 모니터링 할 수 있어 시간 및 계절에 따른 신호 품질의 변화 및 순간적인 방송 신호의 변화 등을 감지할 수 있는 새로운 형태의 방송 품질 모니터링 시스템이다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.11
• /
• pp.1633-1640
• /
• 2013

In this paper, noise parameters for high frequency modeling of dual-gate FET are extracted and analyzed. To extract thermal noise parameter of dual gate, noise characteristics are measured by changing input impedance of noise source using Tuner, and the influence of pad parasitic elements are subtracted using open and short dummy structure. Measured results indicated that the dual-gate FET is improved the noise figure by 0.2dB compared with conventional cascode structure FET at 5GHz, and it confirmed that the noise figure has dropped due to reduction of capacitances between the drain and source, gate and drain by simulation and analysis of small-signal parameters.

• Journal of Broadcast Engineering
• /
• v.24 no.3
• /
• pp.485-494
• /
• 2019

A software-driven real-time frequency de-modulator is implemented with the aid of universal-serial-bus (USB) type software defined radio dongle. An analog stereo frequency modulation (FM) broadcast signal is down-converted to the basedband analog signal then converted to digital bit streams in the USB dongle. Computer software such as Matlab, Python, and GNU Radio manipulates the incoming bit streams with the technique of digital signal processing. Low pass filtering, band pass filtering, decimation, frequency discriminator, double sideband amplitude demodulation, phase locked loop, and deemphasis function blocks are implemented using such computer languages. Especially, GNU Radion is employed to realize the real-time demodulator.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.305-310
• /
• 2006

TV 프로그램 전송 방식이 아날로그에서 디지털로 바뀌며, TV방송의 다채널화 현상이 일어나고 있다. 동시에 많은 채널을 시청하며, 정보를 습득하고자 하는 바쁜 현대인들에게 두 개 이상의 채널을 동시에 시청하면서, 이를 녹화하거나 모니터링 하고자 하는 Need가 점점 높아져 가고 있다. 두 개의 튜너를 이용하여 두 채널의 방송을 동시에 시청 할 수 있는 PIP(Picture in Picture-동시화면) 기능은 이러한 사용자 욕구를 해소함과 동시에, 프리미엄 TV의 기술적 특성으로 자리잡고 있다. 현재 LG전자 TV의 경우, PIP관련 기능은 5가지로 [동시화면] [부채널+] [부채널 -] [부화면 입력][주부전환] 이 있다. 이러한 PIP관련 기능은 리모컨에서 부가기능 버튼으로 동작하고 있으며, 리모컨 레이아웃의 복잡성을 증대시키는 큰 원인이 되고 있다. 특히 관련 버튼이 숨김 버튼으로 배치되어 있어 사용자는 버튼을 찾지 못하고 오히려TV OSD 메뉴 상에서 PIP기능을 찾는 오류를 범하고 있어 직관적인 사용성을 제안하지 못하고 있다. 따라서 본 연구에서는 리모컨에서 PIP관련 버튼을 줄임과 동시에 PIP 사용성을 높일 수 있는 개선안을 제안하고자 하였다. 연구 방법은 PIP 사용행태 분석을 통한 문제점 파악 후 2가지 개선안을 도출한 후 각각의 개선안에 대한 사용성 검증을 실시하였다. 그 결과, 기존의 리모컨 버튼으로 접근하는 것이 사용성이 더 좋을 것이라는 예상을 깨고, PIP기능 사용 시 OSD메뉴로 접근하는 것이 수행시간이 줄어들었음을 알 수 있었다. 이것은 TV라는 매체의 특성상 사용자는 TV화면에서 기능 수행 후 Feedback을 기대하며, TV화면 상에서 동작하는 것에 더 익숙하기 때문이다. 이는 향후 새로운 TV기능 구현 시 중요한 Impact로 작용할 수 있다. 그 이유는 리모컨 버튼을 활용하여 모든 기능을 수행하는 것보다, 특정 기능은 OSD상에서 구현하는 것이 TV의 직관적인 사용 Scene에 더 적합한 것을 파악할 수 있었기 때문이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2113-2120
• /
• 2015

This paper presents an integrated receiver to support multimode broadcasting standards such as DVB-T2, DVB-C2, and DVB-S2 in a single platform. The integrated receiver consists of a tuner block, a receiver engine, a frame processor, and an A/V decoder. The receiver engine includes a channel decoding engine and a demodulation engine to perform OFDM and APSK demodulations. The frame processor performs deinterleaving and BB frame decoding functions. The demodulator engine and the frame processor are implemented in two FPGA devices and DSP-based embedded software, respectively. To verify the functionality of the integrated receiver, it is tested in the laboratory. Commercial PC-based modulators are used to generate the DVB-T2, DVB-C2, and DVB-S2 modulated signals. The integrated receiver was tested under various operation modes as specified in the standards such as DVB-T2, DVB-C2, and DVB-S2 and showed successful operation in all the scenarios tested.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.46-52
• /
• 2001

This study describes the precision control of the torque standard machine using a self-tuning fuzzy controller. The torque standard machine should generate the accurate torque for calibrating a torque sensor. In order to reduce the relative expanded uncertainty of the torque standard machine, when a weight is hanged to the end of the torque arm for generating the torque, the sloped torque arm should be accurately controlled to the horizontal level. If the slope of the torque arm is larger from the inaccurate control, the uncertainty of the torque standard machine due to control will be larger. This applies the inaccurate torque to a torque sensor to calibrate, and the measuring error of the torque sensor generate from it. Therefore the torque arm of the torque standard machine is accurately controlled. In this paper, the self-tuning fuzzy controller was designed using a fuzzy theory, and the torque arm of the torque standard machine was accurately controlled. The control gain of the fuzzy controller, that is the membership function size of the error, the membership function size of the error change and the membership function size of the controller were determined from the self-tuning. The control results of the torque standard machine were the overshoot within 0.0076mm, the rise time within 16.70sec and the steady state error within 0.0076mm.

• KIISE Transactions on Computing Practices
• /
• v.23 no.8
• /
• pp.459-465
• /
• 2017

Although the performance of computer hardware is increasing due to the development of manycore technologies, software lacking a proportional increase in throughput. Functional languages can be a viable alternative to improve the performance of parallel programs since such languages have an inherent parallelism in evaluating pure expressions without side-effects. Specifically, Haskell is notably popular for parallel programming because it provides easy-to-use parallel constructs based on monads. However, the scalability of parallel programs in Haskell tends to fluctuate as the number of cores increases, and the garbage collector is suspected to be the source of this fluctuations because it affects both the space and the time needed to execute the programs. This paper uses the tuning tool, GC-Tune, to improve the scalability of the performance. Our experiment was conducted with a parallel plagiarism detection program, and the scalability improved. Specifically, the fluctuation range of the speedup was narrowed down by 39% compared to the original execution of the program without any tuning.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2747-2754
• /
• 2012

This thesis explains the development of multiple LCD system with the additional function to maximize the utilization of PC contents. The newly developed system is composed of host LCD and slave LCD. Host LCD decodes and outputs the image and voice of NTSC, PAL, SECAM signals. It also converts the decoded signals into LVDS signals before transmitting them to slave LCD stage. In addition, the installation of CF Memory and USB Memory helps display multi-media data. Unlike the host LCD, since not including the tuner and memory part, the slave LCD can't receive TV signals and play video signals. It only has the function to receive LVDS image signals and display on a LCD panel. This newly developed multi-LCD system has competitiveness in various aspects. With its simple structure, the failure rate, price and display power are relatively low due to its simplification of the control part. It has price and functional competitiveness as the product whose host LCD can control the entire slave LCD in terms of channel, volume, and video output.