• 한국식품조리과학회지
• /
• 제16권4호
• /
• pp.316-320
• /
• 2000

This study was carried out to standardize the recipe of Gaeseong-Juak. The formation and quality of the Juak were investigated under different treatment conditions. 1. The high ratio of medium flour(20%) in the flour mixture resulted in poor swelling. 2. The flour mixture with 10% strong flour showed higher volume of Gaeseong-Juak compared with the 10% mixture of medium flour, but the score of sensory evaluation was low. 3. The addition of Makkoli in the dough did not give significant difference in the formation of Juak, but the sensory score was low. 4. The deep-frying temperature in the range of 150$\^{C}$ to 170$\^{C}$ allowed the greatest swelling of Gaeseong-Juak, but the highest quality score was obtained at 160$\^{C}$ treatment. Overall, the best preparation condition of Gaeseong-Juak was that the mixture of waxy rice flour with 10% medium flour was kneaded with Makkoli and fried at 160$\^{C}$.

• 한국식품조리과학회지
• /
• 제9권4호
• /
• pp.293-297
• /
• 1993

This study aims to seek ways to improve frying stability of soybean oil which is widely used for deep frying while at the same time attempting to develop new frying oil and fat of high quality. Taking soybean oil as a control group, the study fried frozen potatoes with hydrogenated soybean oil with iodine value ranging from 60 to 110 for 15 hours. The test results showed that in frying stability, hydrogenated soybean oil with iodine value of 87 and 63 was superior to normal soybean oil and hydrogenated soybean oil with iodine value of 111(P<0.05). In sensory evaluation, however, no significant difference can be detected among groups(P>0.05). The correlation between physicoche-mical properties and sensory evaluation results was highest for smoke point and viscosity. This study concludes, therefore, that hydrogenated soybean oil with iodine value of 60~90 is better than normal soybean oil as deep-frying oil.

• 한국분무공학회지
• /
• 제11권2호
• /
• pp.113-120
• /
• 2006

The effect of internal liquid flow on spray plume characteristics was performed experimentally in subsonic cross flows. The injector internal flow was classified as three modes such as a normal, cavitation, and hydraulic flip. The objectives of the research are to investigate the effect of internal liquid flow on the spray plume characteristics and compare the trajectory of spray plume with previous works. The results suggest that the trajectory and width of spray plume can be correlated as a function of liquid/air momentum flux ratio(q), injector diameter and normalized distance from the injector exit(x/d). It's also found that the injector internal turbulence influences the spray plume characteristics significantly.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.214-219
• /
• 2007

Both the bubble rising in a fully filled container and the droplet splash are simulated by a solution code(PowerCFD). This code employs an unstructured cell-centered method based on a conservative pressure-based finite-volume method with interface capturing method (CICSAM) in a volume of fluid(VOF) scheme for phase interface capturing. The present results are compared with other numerical solutions found in the literature. It is found that the present code simulate complex free surface flows such as multi phase flows due to large density difference efficiently and accurately.

• 한국식품조리과학회지
• /
• 제18권3호
• /
• pp.340-348
• /
• 2002

Changes in the physicochemical properties of frying oil after single or repeated use in foodservice establishments were studied. The experiment was designed to simulate the practical frying practice based on a survey from the dieticians in the food service establishments. Used oils came from the single frying of mackerel and the sequential frying of 1) potato and mackerel, 2) battered pork and mackerel, and 3) potato, battered pork, and mackerel. The used oil samples were analyzed and compared with the fresh one. Oil quality parameters such as acid value, peroxide value, thiobarbituric acid value, iodine value, viscosity, and color were measured at each step of deep-fat frying. The physicochemical properties of the frying oils have been more or less affected by the frying conditions. However, the used oils resulted from the experimental trials were within the range of acceptance as indicated by the acid and peroxide values.

• 한국식품위생안전성학회지
• /
• 제19권2호
• /
• pp.55-59
• /
• 2004

This study was performed to investigate 172 samples of fried food in fast food store. The free fatty acid value of 22 samples exceeded standard of fried-food. These samples were 10 fried chickens, 6 fried potatoes and 5 fried onions. Fatty acid composition differed from each company. The correlation between free fatty acid value and double bond index was very low. New standard of fried food in fast food store is needed for thorough hygiene management, because of being not existed standard. The fried potato containing many carbohydrate and fat appeared higher calory than fried chicken containing many protein. The fried food had high fat comparatively, so that attention in regard to excess intake is demanded. The trace materials were included Mg, Ca, Mn, Fe, Zn, Cu and Cr in order of quantity, and the harmful heavy metals-Pb, Hg and Cd- were included small quantity.

• 한국식품위생안전성학회지
• /
• 제9권4호
• /
• pp.199-203
• /
• 1994

The oxidation of cholesterol in tallow heated at three frying temperatures, 130, 150 and 18$0^{\circ}C$ was studied by assaying cholesterol oxidation products(COP)by GC-MS. The correlation between levels of COP and changes of physicochemical parameters (peroxide value, polymer, polar components and dielectric constant) in tallow heated were studied. As temperature increased, the amount of cholesterol was decreased proportionally with heating time. However, the levels of COP did not increase considerably with increased frying temperature. The rate of cholesterol disappearance was the greatest at 18$0^{\circ}C$ and the smallest at 13$0^{\circ}C$. Larger amounts of COP formed were found at 15$0^{\circ}C$ than at 18$0^{\circ}C$. The levels of COP formed in tallow heated showed highly correlation with(r=0.94, n=30, p<0.01) polymer, polar components and dielectric constant, respectively.

• 식품기술
• /
• 제12권1호
• /
• pp.84-87
• /
• 1999

식품으로 사용된 미강유는 1994년 이래로 미국에서 상업적으로 생산되어 왔다. 다른 식물성 기름과 비슷한데도 불구하고 미강유가 niche 시장에서 특별한 기름으로 부각된 것은 몇 가지의 독특한 성질 때문이다. 미강유는 견과류와도 같은 향기가 매우 좋고 추출될 때는 튀김유로서 매우 안정적이다. 그러나 미강유의 가장 주목할만한 특징은 $ \gamma-oryzanol과 tocotrienols같은 nutraceutical value가 매우 높은 수준으로 함유되어 있다. 1997년 식물성유의 연간 세계 총생산은 약 8천4백만 톤으로 추정된다(USDA, 1998). 전세계 쌀 수확량으로부터 약 7백만 톤의 쌀겨기름을 생산할 수 있다. 이 양은 연간 총생산 식물성유의 약8%에 해당된다. 그러나 현재 연간 세계 미강유 생산이 80만 톤 미만으로서 모든 식물성유의 약1%로 추정된다 대규모 정미기가 갖추어져야만 실용적인 규모로 미강으로부터 기름을 추출하고 미강의 안정화 시스템 설비를 구비할 수 있다. 그러나 세계 미곡 생산량의 대부분이 소규모 정미기로 가공된다. 이러한 이유 때문에 가까운 장래에 전체 미강 생산의 50%이상으로부터 미강유를 생산할수 있을 것 같지는 않다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.572-575
• /
• 2008

Two-dimensional multiphase flows due to density difference such as the Rayleigh-Taylor instability problem and the droplet splash are simulated by an in-house solution code(PowerCFD). This code employs an unstructured cell-centered method based on a conservative pressure-based finite-volume method with interface capturing method in a volume of fluid(VOF) scheme for phase interface capturing. The present results are compared with other numerical solutions found in the literature. It is found that the present code simulates complex free surface flows such as multiphase flows due to density difference efficiently and accurately.

• 한국식품위생안전성학회지
• /
• 제12권1호
• /
• pp.47-54
• /
• 1997

Fried vegetable mix, fried fish mix and fried chicken which prepared as convenient style at traditional market in Chonju were collected and evaluated their chemical composition, lipid and microbial changes during storage at different temperaturefor confirming those fried food stability. The POV and AV of oil in samples and total bacterial count during storage at 5, 15, 20 and 3$0^{\circ}C$ were monitered. The POV, AV and total bacterial count tested of each sample, shelf-life can be suggested as within 1 day at 3$0^{\circ}C$, 2~3 days at 15~2$0^{\circ}C$ and over 5 days at 5$^{\circ}C$.