• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1774-1780
• /
• 1991

본 연구에서는 유한 길이를 갖는 수직 덕트내 공기 유동의 속도 분포를 LDV를 사용하여 측정하며 유동 특성에 미치는 가열정도, 덕트간격 및 입구소도등의 영향을 보고하고자 한다. 또한 속도분포, 온도분포 및 열전달에 미치는 부력의 영향을 수치 적으로 예측하여 그 타당성을 검증하고자 한다.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.53-60
• /
• 2010

In the present study, experiments have been performed to investigate the possibility of removing Cochlodinium polykrikoides using the dredged sediment from a coastal fishery and then to derive the optimal conditions; the amount and particle size of dredged sediment besprinkled into water, the thermal treatment, the types and amounts of additives, and the depth profile of Cochlodinium polykrikoides. Results showed that the optimal amount of dredged sediment besprinkled into water was 6~10 g/L, and the removal efficiency of Cochlodinium polykrikoides after the reaction time for 60 min was 73~93%. Note that, in the real sea water, it is necessary to besprinkle 6~10 $kg/m^3$ of dry dredged sediment on a unit area (1 $m^2$). With decreasing particle size, Cochlodinium polykrikoides could be more efficiently removed. The removal efficiency was 93% with the dredged sediment smaller than 100 ${\mu}m$, whereas it was 51% with that of 100 ${\mu}m$ ${\mu}m$. Since most of dredged sediment (over 90%) was smaller than 100 ${\mu}m$, high efficiency could be obtained by besprinkling only the dredged sediment without pre-treatment. CaO was found to be an effective additive in promoting the removal efficiency (up to 99%). The optimal amount of additive was 5~10%, however, it was necessary to use as small amount of an additive as possible in order to avoid the sharp increase in pH. The removal efficiency increased with increasing depth profile of Cochlodinium polykrikoides. The removal efficiency was 83% at 5 cm depth, whereas it was 93% at 50 cm depth. In the sea water, red tide occurred within 3 m depth, and furthermore most Cochlodinium polykrikoides existed within 1 m depth. It was, therefore, expected that higher removal efficiency of Cochlodinium polykrikoides could be obtained when the dredged sediment was besprinkled into the sea water. The removal efficiency of Cochlodinium polykrikoides was up to 93% when the dredged sediment (<100 ${\mu}m$) was besprinkled into water at the ratio of 10 g/L. This result was comparable to that obtained with loess (90~97%). All the results in the present study indicated that the dredged sediment from a coastal fishery could be successfully used as a substitute of loess for removing the red tide alga.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.11b
• /
• pp.634-637
• /
• 2003

본 논문은 지형중심 게임에서 깊이레벨에 기반한 텍스처 분석 테이블(TAT)을 이용하여 높이에 따라 정의된 지형 객체들을 효율적으로 생성 시킬 수 있는 알고리즘을 제안한다. 기존의 방법에서는 맵에디터 상에서 지형의 텍스처와 지형의 사실적 표현을 위해 나무나 바위 등의 지형 객체를 수작업으로 편집하였는데 제안한 알고리즘을 적용하면 깊이 단계별 최소의 지형 텍스처만을 사용하여 매우 다양한 종류의 지형 텍스처를 생성해 낼 수 있으며, TAT로부터 깊이 정보값을 활용하여 자연-객체들(Natural Object)을 자동으로 생성시킬 수 있다. 이로써 게임 지형을 제작하는데 불필요한 작업량을 줄일 수 있으며, 그만큼 인공-객체들(Artificial Obejct)을 생성하는데 많은 시간을 투입할 수 있다.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.1
• /
• pp.15-24
• /
• 2015

This paper presents the results of a reduced-scale physical model investigation into the effect of drilling fluid with different mix designs for bore hole collapse prevention. The bore hole collapse prevention mechanism for the bentonite based drilling fluid was first discussed together with the effect of conditioning with different additives on engineering characteristics of bentonite based drilling fluid. Reduced-scale model tests were then carried out considering field procedures for cases with a decomposed granitic soil with 20% fines and a sand with various drilling fluids with different mix designs. The results indicated that the addition of polymer to the bentonite based drilling fluid decreases the amount of drilling fluid injected, the drilling fluid infiltration thickness and increases the final depth of excavation. Also revealed is that the effect of polymer on the performance of drilling fluid is more pronounced in the decomposed granite soil with 20% fines than the sand. Practical implications of the findings from this study are discussed in great detail.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.321-331
• /
• 2013

This paper describes the evaluation of shield TBM disc cutter penetration depth in practice. In this study the disc cutter penetration depth used to design the excavation speed of tunnel is reviewed. The characteristics of ground encountered in the investigation site are analysed and evaluated. The shield TBM used in the field is reviewed to verify the applicability of machine in the site. The thrust and torque capacities of each TBM disc cutter are also evaluated. Based on the field data, the excavation volume and speed are re-analysed to evaluate the disc cutter penetration depth used in the design stage. It is clearly found that the design value of disc cutter penetration depth needs to modify when estimation of the TBM capacities in very hard rock formation ($S_c$ >150 MPa).

• Korean Journal of Environment and Ecology
• /
• v.17 no.4
• /
• pp.360-365
• /
• 2004

This study was carried out to estimate net fine root carbon production in Quercus variabilis natural stands in Chungiu area. Soil samples were taken in 0-30cm, 30-60cm, and 60-90cm soil depths from April to November using soil sampler. Fine root carbon biomass was higher in 0-30cm soil depth than the other soil depths. Net fine root carbon production (kg/㏊/yr) were 671kg in 0-30cm soil depth, 599kg in 30-60cm soil depth, and 479kg in 60-90cm soil depth, and 1749kg in 0-90cm soil depth. fine root turnover rates were 0.43 in 0-30cm soil depth, 0.96 in 30-60cmsoil depth, and 1.03 in 60-90cm soil depth. N, p, K, and Mg input into the soil (kg/㏊/yr) due to fine root turnover at 0-90cm soil depth in this study were 33.9kg, 1.8kg, 11.4kg and 20.1kg, respectively.

• Korean Journal of Organic Agriculture
• /
• v.24 no.4
• /
• pp.907-917
• /
• 2016

This study aimed at improving the method of oil cake application in maize. The experiment was conducted during 2 years at NAS (National Institute of Agricultural Sciences) experimental field, located in Wanju-kun, Jeollabuk-do. Growth factors and nutrient use efficiency were evaluated depending on oil cake application depth, placement, and application rate. Difference in oil cake application method and depth was tested in 2012 and different placements of oil cake application were compared in 2013. Plant height, SPAD value, and dry weight of stem and corn were investigated. SPAD value, dry weight of stem and corn were significantly higher in oil cake banding treatment (OB5, 5 cm depth) as compared to others application methods, i.e. spreading (OS0), deep banding (OB10) and banding + spreading (OB5S). In addition, dry weight of stem and corn of banding treatments (OBL, OBLL) on rhizosphere and in between row (OBR) were higher than spreading treatment (OSP). Furthermore, in case of reduced application rate in additional fertilization did not decrease dry weight of corn and increased nutrient use efficiency. Therefore, it is concluded that banding application in 5 cm-depth and rhizosphere can improve growth and nutrient use efficiency in maize production.

• Resources Recycling
• /
• v.6 no.4
• /
• pp.24-30
• /
• 1997

The recent trend of recycle of mold scrap is to make high quality secondary ingot which can be used as raw malerial undcr intensive control of scrap. In this study, recycle of aluminum chlp generated atter machinmg process of castings was performed by vortex melting melhod Vortex melting technique was adopted for chip mclting process. The condition far optimal vortcx depth was decided using water mndellng experiment varying the shape, location, rotating speed of stlircr and watcr levcl. Before melting, chips were preheated at room temperame, 200, 300, $ 400^{\circ}C$and then submerged in the mirldle of vortex. The lecovery rale depending on the temperature was examined. As a result vortex depth was influenccd only by shape and rotating speed of stirrer, and the hlghest recovery rate oI 97% was obta~nedw hcn the submerged chip was preheated at $300^{\circ}C.$

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.86-87
• /
• 2013

해운 항만의 환경이 2000년대 들어서 10,000teu급의 대형 컨테이너선박이 집중 투입되면서 선박의 대형화와 고속화가 가속되고 있다. 이에 따라 전세계 해운시장의 업계들은 살아남기 위한 방안으로 M&A와 Alliance들을 선택하였다. 각각의 선사들은 주력하고 있는 항로들이 다르며 그에 따라 전략적인 제휴관계를 맺고 있다. 본 연구에서는 전 세계 해운 선사들의 Alliance 관계를 파악하고 그들의 사회연결망기법중의 하나인 Net-miner4를 활용하여 네트워크 구조에 대해서 깊이 있게 살펴보았다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.214-222
• /
• 2001

A precise echosounding system to investigate the topographical characteristics of the coastal fishing ground was composed of a public-DGPS receiver, a single beam echosounder and a survey software. To confirm the usefulness of the system, a set-net fishing ground and the distribution of artificial reefs were surveyed. The results obtained are as follows : 1. The 2-D positioning error of the public-DGPS receiver with a DGPS mode and a GPS mode was 5.47 m, 7.03 m, respectively. 2. The experimented set-net fishing ground was located on the level ground at the depth of 9-10 m, a small size valley 1-2 m deep and approximately 10 m wide was found at a distance of 120 m from the set-net to the south. 3. In the artificial reefs' water area near the Jaran Bay, it was confirmed that twenty rectangular artificial reefs were established by the piece at the depth of 15-25 m and a natural reef 5-8 m high on the sea bed was located near the group of artificial reefs. 4. It was confirmed that the precise echosounding system was a useful tool in the pre-study to choice an appropriate water area to provide the artificial reef.