• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1A
• /
• pp.31-37
• /
• 2012

The phase distribution in concrete materials strongly affects its material properties. It is important to identify the spatial distribution of void in concrete because the void in concrete materials affects mechanical behavior and permeability significantly. Therefore, a proper method to describe the void distribution of a material is needed. In this research, CT(computed tomography) is used to examine and to quantify the void distribution of porous concrete specimens. 3D concrete digital specimens are created by subsequent stacking of 2D cross-sectional images from CT. Then, probability distribution functions such as two-point correlation, lineal-path and two-point cluster functions are used for void distribution characterization. It is confirmed that probability distribution functions obtained from CT images are effective in characterizing void distributions including the anisotropy and percolation.

• Journal of the Korea Concrete Institute
• /
• v.14 no.2
• /
• pp.257-265
• /
• 2002

Porous concrete has good permeability sine it contains about 10∼20 ％ of voids, had has been introduced to korea in early 1980's. It, however, has problems such as a lack of optimized mixture, low strength and durability, and etc. It is thus Interesting to manufacture high-performance porous concrete satisfying the mechanical characteristics to be supplied In practical construction. The results of this study were as follows : the compressive strength was 132∼221 kgf/$\textrm{cm}^2$, the splitting tensile strength was 15∼25 kgf/$\textrm{cm}^2$, the flexural strength was 36∼54 kgf/$\textrm{cm}^2$, and the coefficient permeability was 1.05${\times}$10$\^$-1/ ∼ 9.20${\times}$10$\^$-2/ cm/sec. In order to change the maximum size of aggregate, It is believed that other mixtures should be studied further.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1053-1056
• /
• 2008

Permeability coefficient of concrete is a substantial key parameter for understanding the durability performance of concrete and its micro-structural densification. Many researches to deal with the issue have been accomplished, however, it is very rare to deal with the theoretical study on permeability coefficient in connection with carbonation of concrete and the effect of volumetric fraction of cement paste or aggregate on the permeability coefficient. The majority of these researches have not dealt with this issue combined with carbonation of concrete, although carbonation can significantly impact on the permeability coefficient of concrete. The purpose of this study is to establish a fundamental approach to compute the permeability coefficient of (non)carbonated concrete. When simulating micro-structural characteristics as a starting point for deriving a model for the permeability coefficient by the numerical simulation program for cementitious materials, HYMOSTRUC, a more realistic formulation can be achieved. For several compositions of cement pastes, the permeability coefficient is calculated with the analytical formulation, followed by a microstructure-based model. Emphasis is on the micro-structural changes and its effective change of the permeability coefficient of carbonated concrete. The results of micro-structural water permeability coefficient model will be compared with results achieved from permeability experiments.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.6
• /
• pp.213-222
• /
• 1998

Covering polmer mortar as a filter for permeable polymer concrete on the base polymer concrete is nessary for good permeability from infiltration continuously. Therefore, three covering polymer mortars on the optimum base polymer concrete were cast immediatly following on the casting of the base polymer concrete. They are tested for compressive and flexural strengths, adhesion in tension, hardening shrinkage and permeability, and the effects of the mix proportioning factors on the properties of the permeable polymer concrete are discussed. From the test results, increase in the compressive strength and decrease in the coeffiecient of permeability of base polymer concrete are clearly obserbed with increasing filler-binder ratio. The base polymer concretes having a compressive strength of 9.4~28.3MPa and a coefficient of permeability of 0.12~1.93 cm/s can be produced in the consideration of the mix proportioning factors. Binder and filler contents in mix proportions had a great influence on the permeability of polymer concretes. The mechanical properties of permeable polymer concretes covered with polymer mortar using crushed stone are superior to other filters, and hardening shrinkage is the smallest in filters. It is apparent that adhesion between the base polymer concrete and polymer mortar is affected by the degree of hardening shrinkage. From this study, proper mix proportions can be recommended in the consideration of properties of the permeable polymer concrete.

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.435-441
• /
• 2015

Concrete, as a porous media, has permeability and it is considered as a major parameter for durability evaluation. Cold joint caused by delayed placing of concrete accelerates water permeation and intrusion of harmful ions. In the paper, concrete specimens containing GGBFS (Ground Granulated Blast Furnace Slag) and OPC (Ordinary Portland Cement) are prepared with cold joint section, and water permeability and water flow at the age of 91 days are measured for 2 weeks. Sound concrete with GGBFS shows decreased permeability to 89% for sound concrete with OPC and 0.86 of decreasing ratio is evaluated in GGBFS concrete with cold joint. Through WPT (Water Penetration Test), the effects of mineral admixture and cold joint on water permeability are evaluated, and variation in water behavior via cold joint is analyzed through probabilistic method as well.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.304-304
• /
• 2011

최근 도시화에 따른 인구증가와 더불어 도로포장 등 불투수면적의 증가로 인하여 우기시 빗물 침투가 차단되어 도심의 지하수위가 저하되며 토양의 건토화, 열섬현상 등의 문제가 발생하게 되었다. 이러한 문제점에 착안하여 본 연구에서는 투수효과를 최대한 고려할 수 있는 고강도의 친환경 콘크리트 블록(에크스톤 바이오 블록; ECOSTONE-BIO BLOCK)을 개발하였으며 기존 콘크리트 블록의 자연적 빗물침투 억제의 문제점을 일부 개선하였다. 본 블록은 캡슐공법을 사용하여, 공극률은 높이면서(투수성 향상), 강도와 내구성이 유지됨은 물론 캡슐안에 황토성분을 첨가하여, 바이오적인 기능 및 재생골재를 이용한 친환경적 제품으로 투수성, 내구성, 기능성을 극대화 시켰다. 또한 제품표면은 천연 백색돌맹이, 흑색돌맹이의 배합으로 자연석재 느낌을 구현하였으며, 쇼트블라스트 및 커링 표면공정으로 미끄럼저항지수를 조절할 수 있어, 기존 콘크리트 보도블록에 비해 투수율, 내구성, 기능성, 안전성이 우수하여, 안전한 보행환경이 가능한 것으로 분석되었다. 마지막으로, 주변 환경과 잘 어울리도록 디자인된 바이오기능성 친환경 블록으로 도심지역 시공시 투수효과에 따른 지하수고갈방지 및 침수피해에 도움을 주리라 사료된다.

• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.41-48
• /
• 2002

In this paper, permeable polymer concretes with unsaturated polyester or vinylester resin content from 5 to 8 weight ％, resin-filler ratio of 1 : 1, sand content from 0 to 15 weight ％ and crushed stone of size 2.5∼10 mm were prepared, and tested for compressive strength, flexural strength and water permeability. The effects of the resin and sand contents on the properties of permeable polymer concrete were discussed. It is concluded from the test results that increase in the strength and decrease in the coefficient of permeability of the permeable polymer concrete arc clearly observed with increasing the resin and sand contents. The permeable polymer concrete showed compressive strength in the range of 170 to 350 kgf/$\textrm{cm}^2$ and flexural strength in the range of 40 to 90 kgf/$\textrm{cm}^2$ at coefficient of permeability from 0.1 to 1.0 cm/sec in this experiment.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.644-647
• /
• 2011

지형 및 환경에 따라 해안 사면의 침식, 세굴을 막기 위한 효과 있는 해안구조물의 설치가 필요하다. 본 연구에서는 유체-구조 상호작용을 고려해서 유한요소해석 프로그램인 LS-DYNA를 사용하여 조파 실험모델링을 하고, 해안사석구조물과 상호작용에 의한 유체 흐름을 분석하였다. 사석의 유무와 크기, 개수 등의 변수를 조정하여 서로 다른 4가지 경우에 따른 결과를 비교 분석하였다. 또한 해안사석구조물을 구성하는 투수 콘크리트의 특성 분석을 위하여 CT 이미지를 사용하여 투수 콘크리트의 공극 분포를 관찰하였다. 투수 콘크리트의 특성에 큰 영향을 미치는 공극 분포의 파악을 위하여 확률 분포 함수를 사용하여 투수 콘크리트 공극의 공간적 분포를 분석하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.367-368
• /
• 2010

Having function to reducing environmental load, water-permeable concrete has advantages to ground permeation of rain-water and sound absorbtion, heat island reduction, etc., but represents the low flexural characteristics compared with general concrete. Therefore, this study analyzed the flexural characteristics by producing water-permeable concrete mixed with wire mesh or fiber reinforcing for improvement to the flexural characteristics of water-permeable concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.303-304
• /
• 2010

In the study, the vibration time affects the properties of permeable concrete block to interpret and improving the performance of permeable concrete block to provide preliminary data for the said purpose.