IETF has proposed CNRP that is a protocol exchanging CNRP objects between server and client for resolving a common name to URIs of the desired Internet resouces. CNRP enables users to access various services via the integrated interface, to easily get the desired resources, and to reuse the results not as the data but as the information. Whereby these advantages, CNRP will be generally used for the integration of the various Internet services or the applications where the resolution of common name is needed. But, CNRP specification doesn't describes the practical implementation method for server and client. Though a few prototype systems are developed in some researches using CNRP, they are not enough to be generally used for the various Internet applications because they doesn't include all objects specified in CNRP specification or they construct systems with one server. So, this Paper proposes the practical implementation method for CNRP server/client through analyzing and solving the problems occurred when implementing them, and implements all objects specified in CNRP specification. This paper also verifies the feasibility of the proposed method by developing the prototype system of the company name resolution service using the CNRP server/client implemented in this study. The CNRP server/client implemented in this paper are used to develop various CNRP application systems.
We are looking at the two different kinds of IT on this paper. One is VoIP and the other is VR (voice recognition). We are more interesting at the evolving techniques and services produced by combining the two techniques mentioned above. Recently, there are so many services and products appeared in the market using voice recognition technique. Now the technique has progressed on the level that can even replace the user interfaces using the QUI or general DTMF. Therefore, we are expecting so many various new services showed UP In the market which is combination of the VoIP and VR. Up until now, three models are available in the field which are wired telephone, wireless telephone, and wireless internet. We know the effectiveness of the VoIP is maximized more when this technique is combined with others rather than used alone without other techniques.
The Transactions of the Korea Information Processing Society
/
v.6
no.2
/
pp.485-496
/
1999
Comparing with sequential programming, parallel programming has additional complexity due to the consideration of parallelism, communication and synchronization of processes. A synergism between users and compliers should be established, each assisting the other to produce high quality parallel programs. On the above underlying philosophy, we developed a parallel Object-Oriented specification language, POOSL, as preliminary works. However, it is still likely to hard for users to write parallel program because users have to consider grammar of POOSL and to write text-based parallel program. It would be more desirable to provide users wit visual environment for effective parallel programming. Therefore, we propose a visual programming environment. VEPO(Visual environment for Parallel Object-Oriented Programming), based on POOSL in order that users can develop parallel programs more easily and conveniently. It aims at supporting a programming environment in which users can represent their programs more naturally and visually I parallel manner with object-oriented concept and essential steps during parallel program development such as program specification, compilation, execution and animation of execution are integrated. VEPO has useful features for parallel processing. Especially, complicated parallel codes for synchronization and communication of processes are automatically generated in the translation phase, so users can be relieved of writing error-prone parallel codes. The system is targeted to the transputer-based parallel system, MC-3. The graphic user interface of VEPO was implemented using Visual C++. Visual programs descirbed on VEPO are translated into Inmos C and executed on MC-3.
Journal of the Korean Society for Nondestructive Testing
/
v.24
no.4
/
pp.390-395
/
2004
The iSTMS is a web-based integrated information system supporting Pre-Service and In-Service Inspection(PSI/ISI) processes for the nuclear power plants of KHNP(Korea Hydro & Nuclear Power Co. Ltd.). The system provides a full spectrum coverage of the inspection processes from the planning stage to the final report of examination in accordance with applicable codes, standards, and regulatory requirements. The major functions of the system includes the inspection planning, examination, reporting, project control and status reporting, resource management as well as objects search and navigation. The system also provides two dimensional or three dimensional visualization interface to identify the location and geometry of components and weld areas subject to examination in collaboration with database applications. The iSIMS is implemented with commercial software packages such as database management system, 2-D and 3-D visualization tool, etc., which provide open, updated and verified foundations. This paper describes the key functions and the technologies for the implementation of the iSIMS.
Journal of the Korean Society for Library and Information Science
/
v.49
no.3
/
pp.109-133
/
2015
The purpose of this study is to develop a model of the TOC (Table of Contents)-based research record system and to comparatively analyze its usability, in order to comprehensively and systematically manage and practically use the various research records generated from the entire process of research and development. For this purpose, the templates for technical recording and the components of each item were proposed to enable technical recording based on TOC, and structured contents were designed to organically connect between these TOC technical records and existing research records. Also, a database logical schema was developed to design a database, and a test collection was constructed on the basis of research records and TOC technical records. Finally, the model of research record system was constructed by designing TOC record search system and user interface including integrated search system. Based on this model, the usability assessment was performed by comparing the existing distributed general systems with the TOC-based research record system. As a result of the comparative analysis of these two systems, the TOC-based research record system showed generally higher utilization of research records than the general systems.
Due to not only proven stability and reliability but a significant investment and years of accumulated -experience and knowledge, legacy systems have supported the core business applications of a number of organizations over many years. While the emergence of Web-based e-business environments requires externalizing core business processes to the Web. This is a competitive advantage in the new economy. Consequently, organizations now need to mine the business value buried in the legacy systems for reuse in new e-business applications. In this paper we suggest a systematic approach to mining components that perform specific business services and that consist of the legacy system's assets to be leveraged on the modem platform. The proposed activities are divided into several tasks. First, use cases that realize the business processes are captured. Secondly, a design model is constructed for each identified use case in order to integrate the use cases with the similar functionalities. Thirdly, we identify component candidates from the design model and then adjust the component candidates by considering common elements among the candidate components. And also business components are divided into three more fine-grained components to deploy them onto J2EE/EJB environments. finally, we define the interfaces of components which provide functionalities of the components as operations.
This paper proposes a reconfigurable scheduler model that can support various real-time scheduling algorithms. The proposed model consists of two hierarchical upper and lower components, task scheduler and scheduling framework, respectively. The scheduling framework provides a job dispatcher and software timers. The task scheduler implements an appropriate scheduling algorithm, which supports a specific real-time application, based on the scheduling framework. If system developers observe internal kernel interfaces to communicate between two hierarchical components, they can implement a new scheduling algorithm independent of complex low kernel mechanism. Once a task scheduler is developed, it can be reused in a new real-time system in future. In Real-Time Linux (5), we implemented the proposed scheduling framework and several representative real-time scheduling algorithms. Throughout these implementations, we confirmed that a new scheduling algorithm could be developed independently without updates of complex low kernel modules. In order to confirm efficiency of the proposed model, we measured the performance of representative task schedulers. The results showed that the scheduling overhead of proposed model, which has two separated components, is similar to that of a classic monolithic kernel scheduler.
Chang, Jaehun;Lee, Gunhee;Jung, Minyoung;Baek, Heumkyung;Lee, Changha;Oh, Min
Korean Chemical Engineering Research
/
v.57
no.5
/
pp.628-636
/
2019
In various industrial processes, piping serves as a link between unit processes and is an essential installation for internal flow. Therefore, the optimum design of the piping system is very important in terms of safety and cost, which requires the estimation of the pressure drop, flow rate, pipe size, etc. in the piping system. In this study, we developed a software that determines pressure drop, flow rate, and pipe size when any two of these design variables are known. We categorized the flows into single phase, homogeneous two phase, and separated two phase flows, and applied suitable calculation models accordingly. We also constructed a system library for the calculation of the pipe material, relative roughness, fluid property, and friction coefficients to minimize user input. We further created a costing library according to the piping material for the calculation of the investment cost of the pipe per unit length. We implemented all these functions in an integrated environment using a graphical user interface for user convenience, and C # programming language. Finally, we verified the accuracy of the software using literature data and examples from an industrial process with obtained deviations of 1% and 8.8% for the single phase and two-phase models.
In order to study interactions between climate change and air quality, a modeling system including the downscaling scheme has been developed in the integrated manner. This research focuses on the development of a downscaling method to utilize CCSM3 outputs as the initial and boundary conditions for the regional climate model, MM5. Horizontal/vertical interpolation was performed to convert from the latitude/longitude and hybrid-vertical coordinate for the CCSM3 model to the Lambert-Conformal Arakawa-B and sigma-vertical coordinate for the MM5 model. A variable diagnosis was made to link between different variables and their units of CCSM and MM5. To evaluate the dynamic downscaling performance of this study, spatial distributions were compared between outputs of CCSM/MM5 and NRA/MM5 and statistic analysis was conducted. Temperature and precipitation patterns of CCSM/MM5 in summer and winter showed a similar pattern with those of observation data in East Asia and the Korean Peninsula. In addition, statistical analysis presented that the agreement index (AI) is more than 0.9 and correlation coefficient about 0.9. Those results indicate that the dynamic downscaling system built in this study can be used for the research of interaction between climate change and air quality.
In this paper, we propose the protocol for construction of smart factory. The proposed protocol for construction of smart factory consists of an OPC UA Server/Client, a technology of TSN realtime communication, a NTP & PTP time synchronization protocol, a FieldBus protocol and conversion module, a technology of saving data for data transmit latency and synchronization protocol. OPC UA server/client is a system integration protocol which makes interface industrial hardware device and supports standardization which allows in all around area and also in not independent from any platform. A technology of TSN realtime communication provides an high sensitive time management and control technology in a way of sharing specific time between devices in the field of high speed network. NTP & PTP time synchronization protocol supports IEEE1588 standardization. A fieldbus protocol and conversion module provide an extendable connectivity by converting industrial protocol to OPC. A technology of saving data for data transmit latency and synchronization protocol provide a resolution function for a loss and latency of data. Results from testing agencies to assess the performance of proposed protocol for construction of smart factory, response time was 0.1367ms, synchronization time was 0.404ms, quantity of concurrent access was 100ea, quantity of interacting protocol was 5ea, data saving and synchronization was 1,000 nodes. It produced the same result as the world's highest level.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.