• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.539-550
• /
• 2014

High resolution satellite images have to be oriented and geometrically processed from GCPs(Ground Control Points) to generate precise DEMs(Digital Elevation Models) and topographic maps. In Korea, thousands of national UCPS(Unified Control Points) are established and distributed all over the country by the Korean NGII(National Geographic Information Institute). For that reason, UCPs can be easily searched and downloaded by the national-control-point-record-issues system. Following the study, we suggested the sky-view and road-view from web-portals for searching and identifying UCPs on the images. To evaluate the usefulness of UCPs in RPCs(rational polynomial coefficients) adjustment of the high resolution satellite images, the one UCP, which of using simple the control point, has been applied to adjust the vendor-provided RPCs of the KOMPSAT-3 images. As a result, the positioning error of corrected RPCs was approximately one pixel and one meter. From this experiment, we conclude that the UCPs will be able to replace the survey GCPs for mapping with the satellite images or aerial images.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_1
• /
• pp.1089-1100
• /
• 2018

In this paper, we analyze the feasibility of establishing a precise sensor model for high-resolution satellite imagery using unified control points. For this purpose, we integrated unified control points and the aerial orthoimages from the national land information map (http://map.ngii.go.kr/ms/map/NlipMap.do) operated by the National Geographic Information Institute (NGII). Then, we collected the image coordinates corresponding to the unified control point's location in the satellite image. The unified control points were used as observation data for establishing a precise sensor model. For the experiment, we compared the results of precise sensor modeling using GNSS survey data and those using unified control points. Our experimental results showed that it is possible to establish a precise sensor model with around 2 m accuracy when using unified control points.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.609-616
• /
• 2017

National Geographic Information Institute has established a plan that preoccupies UCPs (Unified Control Points) at 2~3km intervals in urban areas by considering the distance between existing UCPs by satellite images and aerial photographs in 2015. In this study, we discussed the method of selecting the locations of optimal UCPs by simulating GPS reception environment in candidate sites for UCPs using GIS. For this purpose, we selected new candidate sites for installing UCPs using satellite images and aerial photographs, and analyzed the GPS reception environment by calculating the visibility distance from buildings around UCPs using GIS skyline analysis. The number of and the arrangement of visible satellites that are capable of GPS satellite reception from the viewpoint of sky view were showed by GIS skyline analysis. Quality evaluation results of GPS observation data were compared with average PDOP calculated from hourly PDOP and TEQC in two points of Sungkyunkwan University during 8 hours. As a result of GPS reception environment using GIS, if the PDOP increases, the data acquisition rate is lowed, and the multipath error and the cycle slip are increased. Thus, this study verified that the quality of GPS observation data can be secured by constructing three-dimensional spatial information and simulating PDOP when preoccupying multiple UCPs using GIS.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.499-505
• /
• 2004

현재 국내에서 활발히 이루어지고 있는 GPS 정밀측지측량은 획득된 GPS 관측값의 결과값이 GPS 기준점의 기하학적 강도와 분산계수의 상관관계의 연관성과의 분석없이 사용되고 있는 문제점을 파악하고 육지와 해상의 통합지리정보시스템구축을 위한 수치지도와 전자해도의 통합투영의 필요성에 의해서 이루어졌다. 본 연구의 목적은 크게 GPS 관측값의 정밀도를 향상시키는 방법과 수치지도와 전자해도의 통합투영으로 GPS 기준점들을 이용한 수치지도와 전자해도상의 경계선 오차량을 비교검토를 통해 수치지도와 전자해도의 통합관리의 방향을 제시하는데 있다. GPS 관측값의 정밀도 향상을 위한 방법제시를 위하여 GPS 망조정에 사용되는 3점의 기준점에 대한 기하학적인 강도에 따른 정밀도 분석방법과 분산계수의 변화에 따른 GPS 관측값들의 정밀도 분석방법으로 나누어 검토하였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.4 s.31
• /
• pp.45-51
• /
• 2004

Control stations managed by national and local governmes are associated with other survey work and constructing geography information and they are important assets in the national level as the positional standard of the country. Since these control points are managed as some type of register and the control points could not be easily updated due to the loss of control stations from construction work or urban development. Therefore, the users could not understand the present situation of the changed control stations. In this background, the aim of this study was to develop control station management system which the managers can use to efficiently maintain control points and to support the usage of the survey control points. For developing this system, we have designed input, update, network, analysis and statistic functions, and have constructed the system using Mapobject as main engine with other languages such as Visual C++ and Visual Basic. The graphic data used in this system are 1/5,000 digital map and digital cadastral map, and the attribute data of each control station are point name, map tile name, longitude and latitude coordinates, TM coordinates, surveying data with the format of year-month-day and control situation photos and so on. In the result of constructing this control station management system, we could achieve integrated management of graphic, attribute and positioning information of each control station.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.3
• /
• pp.29-38
• /
• 2016

As publicizing of electromagnetic devices such as smart_phone and drone etc. which are relate with geomagnetic direction, and recognition about the importance to space weather effect and their hazards rises up recently, it is required heavily that the study on the effective measurement of geomagnetic declination and geomagnetic field effects of space weather. The purpose of this study is that the investigation of the feasibility of the absolute geomagnetic measurement in a place, where man-made geomagnetic contamination is low or negligible, with replacing the azimuth marks used for the absolute geomagnetic declination measurement with unified control points(UCP) which established at suburb. Further to this, have first derived the correlation of daily variations and disturbance level between the published indices($K_P$ and $K_K$) and geomagnetic element calculated from geomagnetic data of Cheongyang observatory located at the middle stage in Korea and is a member of INTERMAGNET. In addition, have carried out that the absolute measurement for the geomagnetic declination at three places near unified control point and one place with wide open field in Korea. The world magnetic models(WMMs) are selected as the criteria for comparison on the feasibility of geomagnetic declination investigation near unified control points. We compared deviations of declination from absolute measurement with that obtained from WMMs, also those from WMMs inter-comparison. The result through examination and analysis show that the feasibility of the absolute geomagnetic declination measurement with replacing the azimuth marks with UCP which established at suburb is possible.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.2
• /
• pp.103-110
• /
• 2015

This paper planned for the adjustment of unified control points by compared adjusted software for integrated network and the national integrated network. There may be some errors in the survey date and interpretation of data processing due to applying different software each year. To minimize errors, we performed a precision network adjustment by consolidating control points per observation session over years. Prior to perform the integrated network adjustment with the GPS analysis program (GLOBK) for the final integrated network adjustment, the Quasi-Observation Combination Analysis(QOCA), the Global Kalman filter VLBI and the GLOBK were compared and analyzed to perform an integrated network adjustment. The integrated network adjustment result indicates that the RMSE was rather big with ±0.03m along the vertical axis, but ±0.006m along the horizontal, that is not much different from the existing result.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.09a
• /
• pp.369-371
• /
• 2010

본 연구는 국내 중력 자료의 통합을 위한 정밀도 분석을 위해 지난 2008년부터 현재까지 진행 중인 통합기준점 사업으로 인해 측정된 중력 자료를 기반으로 국내 중력 자료의 정밀도를 분석하였다. 연구에 사용된 중력 자료는 전국에 설치된 통합기준점 805점과 수준점 1424점이 이용되었으며, 이는 일정한 처리 과정을 거쳐 정밀도 분석이 수행되었다. 분석된 자료는 부분적으로 약간의 편차를 가졌으며 각 기기별, 노선별, 일정에 따른 대동소이한 차이를 나타내었다. 본 연구의 자료 처리 과정에 있어 국내 중력 자료의 다양한 문제점과 처리 과정에서의 어려움을 발견하고 이러한 문제점을 분석하였다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.354-355
• /
• 2008

국가기준점은 국가의 주요 인프라시설로서 시설 및 데이터를 일관된 체계를 갖고 유지, 관리되어야 하며 각종 표석기준점 데이터 및 GPS상시관측망 데이터의 체계적인 관리 및 효율적인 활용을 위하여 연계, 통합하고 유지 관리할 수 있는 기술을 개발하고 상시관리 서비스를 할 수 있게 해야 한다. 본 연구는 기존의 국가기준점 관리시스템을 분석하고 새로운 국가기준점 관리시스템 구축의 방향제시를 목적으로 한다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.78-90
• /
• 2021

In order to construct a precision geoid, it has been diversified into land, sea, aviation, and satellite gravity measurement methods, and measurement technology has developed, making it possible to secure high-resolution, high-precision gravity data. The construction of precision geoids can be fast and conveniently decided through GNSS surveys without separate leveling, and since 2014, the National Geographic Information Institute has been developing a hybrid geoid model to improve the accuracy of height surveying based on GNSS. In this study, the results of the GNSS height measurement were compared and analyzed choosing existing public reference points to verify the GNSS height measurement of public surveys. Experiments are conducted with GNSS height measurements and analyzed precision for public reference points on coastal, border, and mountainous terrain presented as low-precision areas or expected-to-be low-precision in research reports. To verify the GNSS height measurement, the GNSS ellipsoid height of the surrounding integrated datum to be used as a base point for the GNSS height measurement at the public datum. Based on the checked integrated datum, the GNSS ellipsoid of the public datum was calculated, and the elevation was calculated using the KNGeoid18 model and compared with the results of the direct level measurement elevation. The analysis showed that the results of GNSS height measurement at public reference points in the coastal, border, and mountainous areas were satisfied with the accuracy of public level measurement in grades 3 and 4. Through this study, GNSS level measurement can be used more efficiently than existing direct level measurements depending on the height accuracy required by users, and KNGeoids 18 can also be used in various fields such as autonomous vehicles and unmanned aerial vehicles.