• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.607-609
• /
• 2002

홈 네트웍 미들웨어 중 디지털 멀티미디어 데이터의 전송을 위한 표준인 HAVi는 IEEE1394를 네트웍 프로토콜로 사용함으로써 디지털 오디오／비디오 데이터의 효과적인 송수신이 가능하고 동적인 네트웍 재구성이 가능하다. 하지만, 이들 디지털 A／V 기기를 제외한 거의 모든 홈 네트웍 정보 단말은 TCP／IP를 통신 프로토콜로 사용하고 있으며, 이를 위한 미들웨어로 Jini 기술이 제안, 적용되고 있다. Jini는 자바 기술에 기반을 둠으로써 플랫폼 독립적인 특성과 코드의 이동성이 보장되는 특징이 있으며 network-and-play를 지원한다. 본 논문은 Jini 네트웍에서 HAVi네트웍에 존재하는 디지털 AV기기의 제어를 위한 HAVi 네트웍 제어 가능한 Jini 서비스의 구조와 제어 기법을 제안한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1359-1364
• /
• 2014

IEEE 802.11p is a representative PHY/MAC layer standard in vehicular communications. The performance of IEEE 802.11p based communication systems has been measured in various criterions such as link setup time, error rate, and throughput for the case of one-to-one. In this paper, we measure the performance of IEEE 802.11p based communication systems in large capacity transmission. The performance of large capacity transmission is measured by considering the maximum 32 simultaneous transmission including one-to-one transmission. We consider two transmission schemes, i.e., broadcasting and unicasting, and the performance is represented as the receiving rate and throughput.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.323-326
• /
• 2007

홈 네트워크의 산업이 급속도로 성장하고 있지만, 홈 네트워크를 구성하고 있는 가정용 기기들이 다양한 서로 다른 통신 방식과 네트워크, 적용분야 등으로 홈 네트워크 서비스를 제공하는데 문제시되고 있다. 새로군 네트워크 기술과 홈 네트워크 서비스가 등장을 하더라도 일관된 홈 네트워크 서비스의 제공과 수용을 할 수 있도록 위해서는 홈 네트워크를 구성하고 있는 기술의 표준화가 필요하다. OSGi는 게이트웨이상의 서로 다른 기술 또는 타사의 서비스간에도 통신이 가능하게 하는 표준 기술을 제공하고 있다. 본 논문에서는 OSGi가 탑재한 홈 게이트웨이에서의 홈 네트워크 서비스의 요구사항들을 살펴보고, PLC통신 기반에 가정용 제어 기기들과 OSGi의 프레임워크가 탑재한 홈 게이트웨이와의 네트워크를 구현하고, 음성인식과 PDA로 홈 기기들을 제어하는 서비스 제공을 위한 설계와 구현을 하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5B
• /
• pp.365-369
• /
• 2012

It is very important to control synchronization by inter-network delay compensation in high speed synchronous optcial transmission network systems. In this study we designed a delay measurement system based on OTDR using Rayleigh backscatterer in order to compensate for time delay due to the length of optical fiber line. We observed waveform variations on both averaging time and peak power of laser pulse. Finally, we executed experimental demonstration on its accuracy and test repeatability by comparison to the methods practically used in the industry. Experimental results show maximum error of 0.06usec and standard deviation of 0.021usec, which means it's possibly applied to delay control system for mobile repeaters and stations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.283-284
• /
• 2021

The domestic and overseas IoT (Internet of Things)-based automation industry is developing remarkably, and the development of this automation technology is further accelerated by the development of sensor technology. In recent years, the smart farm industry for the purpose of growing crops based on various sensor technologies is rapidly developing. In the case of smart farms, real-time monitoring and mobile services are provided by measuring representative environmental data such as temperature, humidity, and CO2 required for crop cultivation. Most of these environmental monitoring and control operations use the RS-485-based Modbus (RTU) communication method. In this paper, we intend to test the performance of sensor data and actuator information required for smart farm construction by building a platform for controlling sensor data and actuators based on LabView using MQTT (Message Queuing Telemetry Transport), an IoT standard protocol.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.185-190
• /
• 2019

This study aims to apply the mathematical method of fractional order derivatives to the controller that controls the system response. In general, the Laplace transform of the PID controller has an exponent of the integer order of s. The derivative of the fractional order has a fractional exponent of s when it is transformed by Laplace transform. Therefore, this controller proposes a design method with the result of discrete time conversion. Because controllers with fractional exponents of s are not easy to design. This controller is applied to a standard secondary system and its performance is examined. Then, it applies to solenoid valve which is widely used in industrial field. A Luenberger's observer was designed to estimate the disturbance state and the observed state was applied to the fractional order controller. As a result, uniform and precise control performance was obtained. It was confirmed that the position error of the steady state is within 0.1 [%] and the rising time is within about 0.03 [s].

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1229-1239
• /
• 1996

The increase of additional information broadcasting of TV demands a graphic overlay processor. This paper is about the design, implementation and testing of a graphic overlay processor called by KBPS decoder ASSP (Applicatio n Specific Standard Product) which is compliance with Korea Broadcast Programming System. KBPS decoder ASSP consists of embedded 8 bit microprocessor Z80, graphic overlay controller, KBPS schedule decoder, memory controller, priority interrupt controller, MIDI controller, infrared raccoon receiver, async scrial communication controller, timer, bus controller, universal parallel input-output port and serial-parallel interface. The 0.8 micron CMOS Sea of Gate is used to implement the ASSP in amount of about 31,500 gates, and it is running at 14.318MHz.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1746-1747
• /
• 2011

BACnet(Building Automation and Control Network)은 빌딩 자동제어 시스템을 위해 개발된 데이터 통신 프로토콜로 ISO에 의해 국제 표준규격으로 제정되었으며, 지난 20여 년간 미국과 유럽을 중심으로 연구 및 개발이 활발히 진행되고 있다. 그러나 국내의 경우 아직까지 개발사례 및 연구활동이 미비한 실정이다. 이에 본 연구에서는 BACnet MS/TP 프로토콜 기반 네트워크 시스템의 실험적 성능해석을 위한 네트워크 모니터링 시스템의 개발 사례를 소개함으로써 BACnet의 국내 기술보급 및 기술확산에 기여하고자 한다.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3910-3922
• /
• 2000

Current power systems are distributed geographically and operated in the form of Energy Management System(EMS)/ Supervision Control and Data Acquisition(SCADA) with the aid of computers and communications. Recently a variety of utilities have had interests in using inforrration technology to bring the efficiency and low operational costs. There is also a trend to integrdte the production, transmission, distribution and management/control of power into one and unified distributed system. To this end, Electric Power Hesearch Institute(EPRI) announced a new standard communication protocol called Inter-Control Center Protocol(ICCP).ICCP specifies the use of Manufacturing Message Specification(MMS) for services required by rccr in application layer and supports the communications between heterogeneous control centers. This paper presents the characteristics of MMS,ICCP and their relationship. Futherrnore, we implement the basic functional blocks of ICCP using MMS services under TCI/IP environments. Finally, we model a simple power system and apply the rccp protocol to this system in a window-based scheme, and finally show the operation and validation of this protocol.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.270-273
• /
• 2012

In this paper, I present the design of Operational Flight Programs(OFPs) on a Multi-Core based Mission Computer(MC) for the optimized performance of the OFPs on Multi-Core based MC. The program assigned as tasks on Multi-Core environment can be scheduled by designing with the use of OpenMp, which is the standard for parallel programming. This paper also describes the differences between Multi-Core Program(MCP) on the technique and Single-Core Program(SCP) in terms of performance aspect. The new proposed design technique is applied to the Integrated Up-Front Control OFP(IUFC OFP) on General Processor Module where Multi-Core based. This paper describes the Multi-Core design technique for the optimized performance of the IUFC OFP, which display and control flight data(Navigation, Communication, Identification Friend or Foe) to pilot.