• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.434-439
• /
• 2002

본 연구는 파장 분할 다중화(WDM：Wavelength Division Multiplexing) 방식 전송 시스템 (Transmission System)에 사용되는 어븀 첨가 광섬유 증폭기(EDFA : Erbium-Doped Fiber Amplifier)의 이득 제어(Gain Control) 방법에 관한 것으로 어븀 첨가 광섬유에서 상호 이득 포화(Cross Gain Saturation) 현상, 이득 비동질 (Gain In-homogeneity) 특성, 그리고 어븀 이온의 밀도 반전(Population Inversion)의 변화 에 의해 출력되는 다 파장 광 신호들의 광 세기가 각기 다르게 출력되는 현상을 고출력을 내도록 구성된 어븀 첨가 광섬유 증폭기와 고속 제어기를 구성하여 위 현상들을 억제하며 이득을 제어하기 위한 레이저 다이오드(Laser Diode : LD)의 제어전압 조사하고, 얻어진 결과들을 토대로 이득 제어에 적합한 방법을 제시하고 제어기를 설계한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.293-297
• /
• 2002

본 연구는 파장 분할 다중화(WDM： Wavelength Division Multiplexing) 방식 전송 시스템 (Transmission System)에 사용되는 어븀 첨가 광섬유 증폭기(EDFA： Erbium-Doped Fiber Amplifier)의 이득 제어(Cain Control) 방법에 관한 것으로 어븀 첨가 광섬유에서 상호 이득 포화 (Cross Cain Saturation) 현상, 이득 비동질(Cain In-homogeneity) 특성, 그리고 어븀 이온의 밀도. 반전(Population Inversion)의 변화에 의해 출력되는 다 파장 광 신호들의 광세기가 각기 다르게 출력되는 현상을 고출력을 내도록 구성된 어븀 첨가 광섬유 증폭기와 고속 제어기를 구성하여 위 현상들을 억제하며 이득을 제어하기 위한 레이저 다이오드(Laser Diode : LD)의 제어전압 조사하고, 얻어 진 결과들을 토대로 이득 제어에 적합한 방법을 제시하고 제어기를 설계한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.7
• /
• pp.610-614
• /
• 1991

This paper proposes a trajectory constrol fo a robot manipulator by using neural network. The inverse dynamic model of manipuator is learned by neural network. The manipulator is controlled by weight values of the learned neural network. The weight valuese is change with a torque of liner vontroller and a acceleration error. Phsically, the totlal torque for a manipualator is a sum of the liner controller torque and the nerural network controller torque. The proposed control effect is estimated by computer simulation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.717-722
• /
• 2011

This paper presents that the electronic controller is developed for controlling the setting temperature and water in the ceramic pipe system. The heating water system is designed for controlling the temperature to supply the heat through the ceramic pipe heater to input the water, also for controlling quantity of water using the water sensor and impeller. The control method of the heating water system is applied the mathematic modeling of the ceramic pipe heater on the suppling the heat at coming water, and the test result of the electronic controller is present to smartly control the setting temperature, therefore the ceramic pipe heater is proposed to be able to apply the heating structure and the control methods as a product.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2353-2363
• /
• 1994

This paper is concerned with the design of a robust digital controller using reduced-order observer on a robotic manipulator under the disturbance. In most cases of robotic manipulator since all state vectors are not measurable, the unmeasurable state vectors must be estimated or reconstructed. Other problems are caused by the nonlinear element like as nondifferentiable Coulomb friction, disturbance due to the gravitational pull, and the torsional spring effect of a link between the drive motor and the manipulator arm. The controller is based on feeding back the observable variables and the estimated state variables which are generated by the observer, and augmenting the system by additional discrete integrators. The feedback gain parameters are obtained by first applying the optimal control theory and then readjusting the feedback parameters to eliminate the limit cycle by using describing Function for nonlinear hybrid system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.481-486
• /
• 2018

DC motors are classified as DC motors with brush structure and BLDC motors without brush structure. Representing the speed control of the BLDC motor is the PI control. The speed control using the PI controller has a disadvantage that the response characteristic to reach the steady state is slow. Therefore in this paper, a voltage controlled speed controller using a Fuzzy Logic Controller (FLC), which has a short steady response time and usefulness of nonlinear control. The validity and usefulness of the proposed fuzzy speed controller are verified by simulation through Simulink of MATLAB program. Experiments were performed on the PI controller and the proposed fuzzy speed controller in three cases with reference speeds of 500rpm, 800rpm, and 1500rpm. Experimental results show that the proposed fuzzy controller has more 30% improved steady state speed response than PI controller.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.395-400
• /
• 2017

As a serial communications protocol, Modbus has become a practically standard communication protocol and is now a commonly available means of connecting industrial electronic devices. Therefore, all devices can be connected using the Modbus protocol with the measurement and remote control on ships, buildings, trains, airplanes and more. The existing Modbus that has been used is based on serial communication. Modbus TCP uses Ethernet communication based on TCP / IP which is the most widely used Internet protocol today; so, it is faster than serial communication and can be connected to the Internet of Things. In this paper, we designed an algorithm to control LED lighting in a wireless Wi-Fi environment using the Modbus TCP communication protocol, and designed and implemented a LED controller circuit that can check external environmental factors and control remotely through the integrated management system of a ship. Temperature, humidity, current and illuminance values, which are external environmental factors, are received by the controller through the sensors, and these values are communicated to the ship's integrated management system via the Modbus protocol. The Modbus can be connected to Master devices via TCP communication to monitor temperature, humidity, current, illuminance status and LED output values, and also users can change the RGB value remotely in order to change to the desired color. In addition, in order to confirm the implementation of the controller, we developed a simulated ship management system to monitor the temperature, humidity, current and illumination conditions, and change the LED color of the controller by changing the RGB value remotely.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.88-95
• /
• 2006

PID controllers, which have been widely used in industry, have a simple structure and robustness to modeling error. But They we difficult to have uniformly good control performance in system parameters variation or different velocity command. In this paper, we propose a nonlinear adaptive PID controller based on a cell-mediated immune response and a gradient descent learning. This algorithm has a simple structure and robustness to system parameters variation. To verify performances of the proposed nonlinear adaptive PID controller, the speed control of nonlinear DC motor is performed. The simulation results show that the proposed control systems are effective in tracking a command velocity under system parameters variation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.630-633
• /
• 2001

본 논문에서는 2.3GHz대역의 WLL(무선가입자 회선망)에 사용하는 전압제어발진기를 설계하였다. 설계된 전압 제어 발진기는 3.2V, 10mA에서 동작하고 출력은 0.67dBm, 위상잡음 특성은 100kHz 옵셋 주파수에서 -102dBc/Hz이고 동조대역폭은 1V-3V의 전압변화에 2200∼2240MHz까지 40MHz의 동조 대역폭을 얻을 수 있었다. 따라서 제작된 전압제어 발진기는 무선가입자 회선망에 적용할 수 있다고 본다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1527-1532
• /
• 2003

기존의 GPC방법으로 제어하기 힘든 비선형성과 플랜트의 변수변화를 포함하는 비선형 플랜트를 지연 예측신경망을 사용하여 효과적으로 제어하는 적응 GPC방법을 제안한다 제안한 방법에서는 플랜트의 선형 변수 추정이나 근사적인 모델로부터 선형 매개변수를 구해서 선형 모델을 만들고 실제 시스템의 출력과 선형모델의 오차를 신경망의 출력으로 표현한 다음, 이 식으로부터 적응 GPC 알고리듬을 유도한다. 여기서 지연 예측신경망은 적응 GPC에 이용될 플랜트의 출력을 예측하도록 학습된다. 이와 같은 제어기를 구성함으로써 선형 변수만으로 적응 GPC 제어기가 구성되어질 경우 생기는 비선형 변수의 추정과 출력 예측 값을 계산하는 번거로움을 해결하였다.