• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.101-102
• /
• 2013

CAN통신은 자동차 내부 전자제어장치 간의 통신을 위하여 개발되었으며, CAN통신은 UART 방식과는 달리 전송속도와 안정성 측면에서도 뛰어나고 배선 결선에서도 간편한 버스타입으로 구성할 수 있어서 배선량을 줄일 수 있어 생산시간의 단축과 신뢰성을 높일 수 있다. 최근에는 자동제동장치, 선박의 엔진제어 등 다양한 분야에서 사용되고 있다. 본 논문에서는 CAN통신을 기반으로 하여 3개의 리니어 액추에이터(Linear Actuator)를 통하여 수평 플랜트에 대한 수평제어를 구현하였다. 또한 본 논문의 수평제어시스템은 수평조절을 하는 액추에이터와 CAN통신을 내장한 AT90CAN128로 구성되어 있다. CAN통신을 기반의 수평제어를 통해 선박이나 자동차의 액추에이터를 조절하여 수평을 제어하고자 한다.

• Annual Conference of KIPS
• /
• 2014.11a
• /
• pp.550-552
• /
• 2014

차량 내부 네트워크는 LIN, CAN, FlexRay와 같은 제어 네트워크와 MOST와 같은 멀티미디어 네트워크가 있으며 이 내부 네트워크와 연결해 서비스를 사용하는 RF 통신으로는 대표적으로 블루투스, GSM, NFC가 있다. 그러나 능동 안전 시스템과 같은 지능형 기술의 지속적인 도입과 기계, 유압식 기기의 전자화에 따른 네트워크상의 통신량이 급격히 증가하면서 네트워크의 규모 및 통신 복잡도 등이 증가하고 있다. 따라서 차량 내/외부 네트워크의 최적화, 최소화 문제가 반드시 해결되어야하는 문제로 떠오르고 있다. 또한 이러한 통신환경이 갖추어진 이후에도 무선통신 기술의 성능향상 및 통신기술과 응용 서비스 분야와의 연계, 그리고 통신서비스를 위한 사업 모델 개발이 요구되는 등 앞으로 해결 해야하는 문제는 여전히 많이 남아 있다고 할 수 있다. 본 논문에서는 지능형 자동차의 RF 통신서비스에서 발생할 수 있는 지능형자동차의 보안위협 요소를 분석하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1330-1338
• /
• 2015

In wireless communication network, the amount of packet data for the video streaming in the playout buffer of the receiver is changed with time according to network condition. If the amount of packet data is less than a specific buffer amount, the buffer underflow problem is generated. On the contrary, if the amount of packet data is more than a given buffer amount, the buffer overflow problem is occurred. When the playout of the video streaming is processed, these buffer underflow and overflow problems cause stop and skip phenomenons and then provide the discontinuity of playout. Therefore, to solve the buffer underflow and overflow problems of the video streaming in wireless communication network, This paper analyzes the combined effect of Token Bucket scheme, which controls the bursty traffic, and AMP(Adaptive Media Playout) scheme, which adaptively changes the playout speed of receiver. Through simulation, we found that the combination of Token Bucket and AMP schemes provides the superiority in terms of the occurrence number of buffer underflow and overflow, the stop duration time and the number of removed frames generated by underflow and overflow, and PSNR.

• Journal of Broadcast Engineering
• /
• v.23 no.6
• /
• pp.768-779
• /
• 2018

In this paper, we propose a novel video quality function for video processing based on MSSSIM to select an appropriate video processing filter and to accommodate multiple processing filters to each pixel block in a picture frame by a mathematical selection law so as to maintain video quality and to reduce the bitrate of compressed video. In viewpoint of video compression, since the properties of video quality and bitrate is different for each picture of video frames and for each areas in the same frame, it is difficult for the video filter with single property to satisfy the object of increasing video quality and decreasing bitrate. Consequently, to maintain the subjective video quality in spite of decreasing bitrate, we propose the methodology about the MSSSIM as the measure of subjective video quality, the KL-Divergence as the measure of bitrate, and the combination method of those two measurements. Moreover, using the proposed combinatorial measurement, when we use the multiple image filters with mutually different properties as a pre-processing filter for video, we can verify that it is possible to compress video with maintaining the video quality under decreasing the bitrate, as possible.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.287-289
• /
• 1998

실시간 스케줄러는 대역폭, 필요 버퍼량 등과 같은 네트워크 자원을 효율적으로 이용하면서 한정된 통신지연(bounded delay)을 제공해야 한다. 최근 이러한 제한 조건을 만족시키기 위해서 많은 스케줄링 방법론이 제시되었다. 그중EDF 스케줄링 방법론이 최적의 성능을 갖는 것으로 알려져있다. 그러나 EDF스케줄링 방법론은 "sort"나 "search"와 같은 연산작업을 수행함으로서, 과다한 오버헤드를 발생시킨다. Rotating Priority Queues(RPQ) 스케줄러는 EDF 연산 작업 없이 EDF스케줄러에 근접한 성능을 갖는 스케줄러이다. 그러나 RPQ스케줄러는 과다한 버퍼량을 필요로 한다. 본 논문에서는 이러한 문제저？ㄹ 해결하기위해서 Multiple Rotating Priority Queues(MRPQ)스케줄러를 제시한다. MRPQ스케줄러는"blick queue"라는 새로운 개념을 이용하여 회전 우선 순위 queue를 다중 계츨으로 구성한다. 이렇게 구성된 MRPQ 스케줄러는 RPQ스케줄러에서 필요한 버퍼량의 반정도의 버퍼량만을 사용하여 RPQ스케줄러와 동일한 동작을 수행한다. 또한 MRPQ스케줄러는 RPQ스케줄러와 동일한 최대 지연시간을 제공한다.러는 RPQ스케줄러와 동일한 최대 지연시간을 제공한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.283-285
• /
• 2012

In this research, we produced a simple momentum measurement system which figures out information for the real-time travel distance with modularizing a momentum measurement system by using the acceleration sensor, MCU and Bluetooth to measure the exact momentum. In the simulation experiments, we compared the reliability and accuracy of the new momentum measurement system with those of existing momentum measurement systems to confirm that the new momentum measurement system shows superior reliability and accuracy. Base on this results, we will produce the enhanced momentum measurement system, compact and possible to shoe-mount, in future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1300-1305
• /
• 2012

In this research, we propose a momentum measurement system using the accelerometer sensor, MCU, and Bluetooth to measure the exact momentum. The proposed system can figure out information for the real time travel distance. We performed various experiments, and analyzed the results using the proposed momentum measurement system. In the simulation experiments, we compared the reliability and accuracy for the existing momentum measurement systems from the analyzed results. The proposed system showed travel distance error of less than 8% as compared to the existing system with the error of approximately 13%. We expect that the proposed system apply to the commercial products.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.355-361
• /
• 2009

This paper proposes a new basic unit level rate control algorithm which generates the output bits corresponding to the target bits. The H.264 standard uses various coding modes and optimization methods to improve the compression performance, which makes it difficult to control the generated traffic accurately. In the proposed scheme, the allocated bits to a frame are distributed to all basic units properly to encode each basic unit according to the bit budget. After encoding the frame, the encoding parameters are adjusted according to the difference between the target and the resulting values. It is shown by experimental results that the new algorithm can generate output bit rates accurately corresponding to the target bit rates with the PSNR performance better than that of the existing rate control algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12A
• /
• pp.1298-1308
• /
• 2004

CAC (Call Admission Control) schemes for different service class are studied in many Papers. A novel priority CAC algorithm, which gives priority to a same class call according to the total resource requirements is proposed and analyzed in this paper. The proposed algorithm provides a priority according to the total resource requirements other than only in a base station. If there are efficient residual resources in the system, it will accept all new calls. Otherwise, it will selectively accept these new calls according to the total resource requirements. The results show that the proposed algorithm provides better call blocking probability, outage probability and throughput than the conventional algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10C
• /
• pp.948-955
• /
• 2006

In this paper, we propose motion estimation and compensation using Low-Band-Shift(LBS) with Integer Lifting Shift property. To overcome shift-variant property on wavelet coefficients, the LBS was previously proposed. This method which is applied to reference frame in video coding technique has superior performance in terms of rate-distortion characteristic. However, this method needs more memory and computational complexity. For the enhancement of those disadvantages, we propose motion estimation using Low-Band-Shift with Integer Lifting. The Integer Lifting implementation gives us good efficiency of calculation and storage.