• Journal of Energy Engineering
• /
• v.28 no.4
• /
• pp.1-7
• /
• 2019

In response to the recent increase in demand for hydrogen stations, the Ministry of Trade and Industry has enacted and promulgated special notifications to enable the installation of hydrogen stations in the form of the combined complex in existing automotive fuel supply facilities such as LPG, CNG, and gas stations. Hydrogen multi energy filling stations haven't been operated yet in Korea till the establishment of special standards, so it is necessary create special standards by considering all Korean environmental characteristics such as four seasons and daily crossings. In this study, we collected and analyzed the charging data of Ulsan LPG-Hydrogen Multi Fueling Station installed for the first time in Korea. The data are hourly temperature and pressure data from compressors, storage vessels and dispensers. We used the data collected for a year, including the highest temperature and the lowest temperature in Ulsan to compare seasonal characteristics. As a result, it was found that the change of the outside temperature affects the initial temperature of the vehicle's container of the hydrogen car, which finally affects the charging time and the charging speed of the vehicle. There was no effect on vehicle containers because the limit temperature suggested by the Korean Hydrogen Station Standard(KGS FP217) and the US Filling Protocol(SAE J2601) was not exceeded.

• Journal of Environmental Impact Assessment
• /
• v.25 no.3
• /
• pp.175-189
• /
• 2016

The guideline for railway noise mapping is notificated in the administration law for noise/vibration which is announced by the ministry of environment, Korea. Here input parameters for the railway sound sources are proposed for each prediction models. In case of the application of the vehicle characteristics it is suggested to choose "0(%)" for the disc brake parameter. However new trains have been in revenue service since the announcement of the guideline, an investigation of the effect of the input parameters of the foreign railway prediction models on the prediction results of korean railway systems are needed. In this paper the sound prediction results are analyzed with a focus on the input parameters such as disc brake percentage, rail roughness, rail joints. Schall03 is used for the railway noise prediction which has been using most frequently in Korea. The results are shown and discussed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.1-9
• /
• 2018

The development of new technology and process in industrial Plant which builds integrated structures, facilities and systems. Has become a key element for strengthening its competitiveness. Although domestic industrial Plant has demonstrated excellence in technology with a persistent increase in order quantity and orders received, the technology gap between countries has narrowed due to global construction trend. Therefore, it is necessary to develop new technology that could help overcome constraints and limitations of the current one to follow the trend in the age of unlimited competition. This study has focused on assembly technology of Pipe-rack joint connection in an effort to strengthen technological competitiveness in industrial Plant. Through an analysis of earlier studies on Pipe-rack and a coMParative analysis of strengths and weaknesses of current assembly technology of it, a new design plan has been made to improve it efficiently. In doing this, standards for design factors of both structural and performance features have been drawn, and value of stress, strain, moment and rotation has been calculated using finite element analysis. As a result, installation technology of modular type Pipe-rack, which has not been developed in Korea and is differentiated from the current one, has been developed. It is considered that the technology reduces work time and saves cost due to simplified joint connection of steel structure, unlike the current one. Moreover, since it is installed without a welding process in the field, industrial accidents would be reduced, which is likely to have economic competitiveness and satisfy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.295-300
• /
• 2009

Statement of problem: As the number of elders is growing with the advancement of medicine, partially or fully edentulous patients have increased. Medically compromised conditions are common in the older population so that it should be taken into account in prosthetic treatment planning as well as their economic conditions. In the older patients, removable prosthesis has been preferred to implant prosthesis. However, cast metal based removable partial dentures also has several limitations. Purpose: In this report, we present several cases of Valplast$^{(R)}$ flexible denture which were fabricated in patients who had medically compromised conditions or whose remaining teeth showed a relatively poor prognosis. Results & Conclusion: This article describes an alternative treatment for a partially edentulous patient with mouth opening limitation, after cancer surgery, compromised general condition and questionable remaining teeth. In these patients, Valplast$^{(R)}$ flexible denture was used because of its unique characteristics and the results were all satisfactory. Patients had 1-2 check-up and there were no postoperative pain or fracture of denture up to now.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.1
• /
• pp.66-72
• /
• 2012

Autogenous tooth transplantation can be defined as the surgical movement of a tooth from one position in the mouth to another in the same individual. The most common reasons for tooth transplantation include replacement of a missing first molar, transplantation of impacted canines to their normal positions in the arch, and transplantation of premolars in areas of missing teeth, especially in the anterior area of the mouth. The key to successful tooth transplantation is proper selection of graft with adequate root development as well as the design of surgical operation. Root development stage with half to three-quarter-developed roots increase the success rate of autotransplantation. We report the cases of successful autotransplantation which resulted in ideal healing of periodontal ligament, gingiva and alveolar bone. All transplanted teeth presented immature root formation at the moment of the procedure. After surgical procedure, we can observe good healing pattern without endodontic problem.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.676-685
• /
• 2016

This study investigated the conversion of oil products from polystyrene by using dispersed Co and Mo catalyst on reaction time and concentration change for knowledging on characteristics at low temperature (425, 450 and $475^{\circ}C$) pyrolysis and reaction time(20~80 min, 15 min interval) in a batch reactor. It will be showed the conditions for optimum pyrolysis at reaction temperature $450^{\circ}C$ and the reaction time 35min, and the main components of the converted liquid oil were styrene and benzene derivatives by GC/MS. The oil products formed during pyrolysis were classified into gas, gasoline, kero, diesel and heavy oil according to the domestic specification of petroleum products. The pyrolysis conversion rate was showed as Co catalyst > Mo catalyst > Thermal in all reaction time at reaction temperature $450^{\circ}C$. The yields rate of gas, kerosine, diesel were the most hight at Mo Catalyst, gasoline was at thermal and heavy oil was at Co catalyst. The conversion rate and yields of the pyrolysis products were the most height when Co catalyst ratio was 100%.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.4
• /
• pp.61-67
• /
• 1999

물론 이 글이 콘크리트 분야에 종사하는 사람이 알아야 하는 모든 것을 언급하지는 않는다 ; 본인의 저서 'Properties of Concrest'의 판매에 나쁜 영향을 주고 싶지도 않다. 내가 원하는 것은 콘크리트를 제작할 때 우리 모두가 주의를 기울여야 하는 중요한 몇 가지를 강조하는 것이다. 포트랜드 시멘트만 들어있는 보통의 콘크리트가 사용되는 시대는 이미 사라져가고 있고, 단순한 응용을 제외하고는 곧 사라질 것이다. 대부분의 경우는 가능한 일련의 시멘트계 재료 중에 선택을 해야 한다. 혼화제, 특히 고성능 감수제는 중요한 역할을 한다. 물을 많이 첨가하는 것이 작업성을 높이는 유일한 방법도 아니고 최선의 방법도 아니다. 성능을 기준으로 한 기준설정에 관여하는 사람은 이 모든 것을 명심해야 한다. 그렇지 않으면 시방기준에 명시된 규정과 근원적인 요구사항이 잘못 이해되고, 시험배합을 통해서만 잘못되었다는 것이 분명해지게 된다. 그 단계에서는 예상보다, 비록 틀린 것이지만, 더 많은 비용이 들 것이다. 시방규정은 통상적인 조항 외에 갈수록 내구성에 관심을 더 많이 보인다. 가끔은 내구성이 구조물의 기대수명에 대한 연수로 표현되기도 한다. 이 숫자를 배합재료에 관한 자료로 변환시키는 데는 여러 배합재료 및 배합비가 콘크리트의 성질에 미치는 영향에 관하여 깊이 알고 있어야 한다. 모든 사람이 그러한 구체적인 지식을 가질 필요는 없지만, 각 조직마다 상의할 수 있는 사람은 있어야 한다. 엔지니어가 언급한 규정이 따로 없고, 도면의 주를 참고하거나 구체적인 절이 명시되지 않은 상태에서 국가 시방기준을 통해서 조금씩 내용을 수집해야 하는 경우의 상황은 더 난감하다. 이러한 경우는 배합설계나 재료의 선택을 책임지고 있는 사람이, 환경에 대한 노출조건 및 필요한 배합재료에 관하여 잘 알고 있어야 한다. 일반적으로 말해서 콘크리트의 배합은 필요한 특정용도에 따라서 선택되어야 한다. 이것이 사람들이 고성능 콘크리트라 부르는 것이라고도 할 수 있다. 내 생각으로는 고성능 콘크리트와 보통 콘크리트의 경계는 곧 사라질 것이고, 앞으로 대다수 고객에게 주문 콘크리트 혹은 맞춤 콘크리트를 제공해야 할 것이다. 만약 이러한 접근방식에 더 많은 비용이 든다면, 그것을 보상하는 방법은 콘크리트에 대한 이미지를 높이고, 또한 앞으로 모든 용도에 계속적으로 이용될 수 있도록 하는 것이다. 아니면 구조물을 보수하고, 보수한 것을 또 보수하고, 해체하고 해야 할 것이다. 결국은 재활용 골재를 생산할 수 있다고 웃으면서 말할지 모르지만, 이런 식으로는 불만을 지닌 사용자가 콘크리트를 가능하면 멀리하게 만들 것이다. 콘크리트는 절대 심각한 경쟁에 처하지 않을 것이라는 가정은 무모하다. 내가 배합비에 대해서 강조해 왔지만, 이것으로 최종적으로 좋은 콘크리트가 된다는 보장은 없다. 비빔에서는 일반적으로 큰 문제는 없지만 골재에 함유된 수분을 더 잘 제어해야하고 주의를 게을리하지 말아야 한다. 비빔시간은 모든 재료가 잘 섞이기에 충분해야 하는데, 마이크로 실리카가 포함되어 있을 경우에는 더욱 그렇다. 단위시간당 믹서의 작업량을 높이기 위해서 충분히 비비지 않아서는 안된다. 그리고 마지막으로, 콘크리트가 타설되고 다져진 후, 적절하게 양생이 되어야 한다. 마이크로 실리카가 배합에 사용되었을 경우에는 특히 그러하지만, 이것은 모든 콘크리트에서 양생을 잘하는 것이 피복부에서 유해물질이 유입되는 것을 최소화하고 철근을 완전히 보호하는데 있어서 절대적이다. 내가 지금까지 말한 것은 콘크리트에 관한 충분한 지식과 이해를 필요로 한다. 이것은 당연하고 또한 적절한 것이라고 생각한다. 왜냐하면 더 이상 콘크리트를 수준낮은 싸구려 재료로 간주해서는 안되기 때문이다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.4
• /
• pp.564-572
• /
• 2000

We decided among extraction, orthodontic traction and autotransplantation such as direction and position of unerupted tooth, degree of developing root apex, eruption space, being of supernumerary tooth or odontoma or cyst when tooth impacted. Autotransplantation is considered when orthodontic traction is unrealistic or when tooth movement can absorb root of neighbor tooth. The prognosis for successful autotransplantation is dependent on a number of factors such as root development, surgical technique, patient's age, endodontic treatment, time and type of splinting, preservation of periodontal ligament and storage medium. Especially when severe osseous defect is being, bone graft considered for reducing of mobility and for assisting recovery. In all cases, chief complaint is unerupted tooth and various causing factors were supernumerary, odontoma, ectopia and so on. Before autotransplantation, space regaining was done if needed and demineralized freezed dried bone and autogenous bone graft was done when there is severe osseous defect by extraction of supernumerary tooth or odontoma. Splinting was removed after 2-3weeks At 3-4weeks after autotransplantation, endodontic treatment was decided. At follow up check, normal recovery was done and there was no inflammatory or replacement root resorption in periapical radiograph.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.3
• /
• pp.77-84
• /
• 2013

In this paper, we focus the changing role of universities of University-Industry Collaboration (UIC) for enriching the regional business ecosystem network. For this research, we analyze 'Regional Innovation System(RIS)' - a specific UIC program- which provides a marketing service for firms, especially, SMEs with a specific problem by a group of consultants including CEOs, professors, and heads of regional public or private service providers. Then we have analyzed using network analysis how the business network was changed from RIS. Moreover, we will interview the participants in the important position of the network and investigate the reason for bringing a change in the network structure by using this program. This study illustrates that various types of network are formed between university and SMEs. Furthermore, the networks surrounding SMEs are extended to the other people connected to them. This means that the business network of SMEs had been diversified via the facilitation of university. This study throws new highlights on the new role for the university as a network promoter in addition to the partner as a technology-provider in the regional business ecosystem. Moreover, the network analysis between before-and-after can be used for the evaluation of the effectiveness of the various UIC programs.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.1
• /
• pp.117-127
• /
• 1991

When open reduction of maxilla fractures is postponed due to concurrent life-threatening injuries, delayed union may result with malunion or nonunion. If delayed malunion is occurred, significant facial deformity may result, including a dished-out face, irregular retromaxillism with Angle's class III malocclusion, open anterior bite, nasal collapse, telecanthus and malar flattening. The treatment planning for this problem includes cephalometric evaluation anterior and lateral tomograms, dental casts, orthodontic planning, dental planning and use of impression tray to rupture the fibrous tissue casts, orthodontic planning, dental planning and use of impression tray to rupture the fibrous tissue attachment at the fracture site. In this paper, one case presented a 58-year-old female patient with maxilla retrusion after comminuted fracture, who was treated with orthodontic methods of maxillary protraction headgear and Plaster headcap, whereas the other two cases were about male patients who were treated principally with surgically open reduction or Le Fort I-controlled transverse osteotomy with iliac bone graft.