• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.159-159
• /
• 2011

수자원 공급의 시 공간적 편차가 큰 우리나라에서는 수자원을 이용하기 위해서 다수의 댐을 건설하고 있다. 특히, 생활수준의 향상으로 용수 수요가 급증하였기 때문에 용수가 부족한 곳에는 광역상수도 사업 등을 통하여 용수를 공급하고 있다. 댐에서 용수가 공급되기까지의 과정은 일종의 관수로 흐름으로 생각할 수 있다. 관수로 내를 흐르는 유체가 갑자기 정지하게 되면, 유체 운동 에너지의 변화가 유발되고, 그로 인해 관내에 급격한 압력의 상승이 일어나게 된다. 반대로 정지하고 있던 유체가 빠른 속도로 흐르게 되면 압력 감소가 급격하게 발생한다. 이와 같이 유체 운동 상태의 급변에 의한 압력변화와 그에 따른 압력파가 음속의 속도로 상 하류로 전파되는 현상을 수격작용(waterhammer)이라 한다. 통상적으로 수격작용은 밸브 개폐 정도가 갑자기 바뀔 때, 펌프의 급격한 기동이나 정지 시, 터빈 내 전력소요가 갑자기 바뀔 때, 댐 수위의 갑작스런 변화, 펌프 임펠러의 진동, 물 수요의 급격한 변화 등에 의해 발생하며, 수격작용은 유체의 질량과 운동량 때문에 관 벽에 큰 힘을 가하게 되어 정상적인 동수압 보다 몇 배나 큰 압력을 발생시킴으로 관 자체는 물론 펌프, 밸브, 터빈 등 관 시설물을 파손시키거나 진동, 소음 등을 야기시킴으로 대규모 건물, 공장, 발전소 등을 설계할 경우 그에 대한 적절한 대책을 강구하여야 한다. 특히 댐에 연결된 저수지 또는 조정지로부터의 도수로가 압력수로이며 그 길이가 상당히 크면 수차가 급정지했을 경우 수격작용에 의해서 압력터널 내에 과도한 압력상승이 일어난다. 이 압력상승을 방지함과 함께 발전소 부하의 증감에 따라서 수량을 공급하거나, 흡수할 목적으로 압력도수로와 수압관과의 접합부에 자유수면이 있는 수조를 설치한다. 이것을 조압수조(surge tank)라 한다(최영박, 1979). 조압수조에서 부하의 급속한 차단에 의해서 수차로 유입될 수량이 차단되면 도수로 내로 흘러 들어온 물은 관성 때문에 수조 내의 수위를 상승시키고, 수조 수위가 어느 정도 이상으로 되어 저수지 수위 보다 상승하면 수조로의 유입이 정지하고 반대로 수조에서 저수지로 역류하여 수조수위는 하강한다. 즉, 조압수조는 도수로 내에 발생한 과도한 압력을 수조 내 수면의 승강운동을 이용하여 감소시키고 원래의 안정적인 수위로 회복시킨다. 본 연구에서는 수격작용에 대한 댐 안정성을 확보하는 수단 중의 하나인 조압수조에 대해 살펴보았다. 연구대상으로 용담댐을 선정하였다. 용담댐에 대한 기존의 검토결과 수직 갱의 지름이 5m 이상이면 조압수조의 동적안정조건을 만족 시키는 것으로 조사되었다. 댐의 설계홍수위인 EL. 265.5m를 기준으로 조압수조의 안정성을 감소시키지 않는 범위 내에서 조압수조 내 격벽 설치 유 무에 따른 수조의 최적 크기를 산정하였다. 산정결과를 분석한 결과 동일 조건에서 격벽을 설치한 경우가 격벽을 설치하지 않은 경우에 비해서 조압수조의 면적이 약 21% 감소하는 것으로 나타났다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.155-167
• /
• 2016

Technology valuation is necessary for determining the feasibility of technology commercialization. However, existing methods focus only on technology evaluation, with limitation in sufficiently reflecting buyer viewpoint. In addition, it causes a gap between estimated value and market value. Therefore, this research suggests a new technology valuation method which focuses on the perspectives of buyers. Technology factors, buyer factors and market factors are first determined and their relationships are analyzed. Second, based on the relationships, profit projections are calculated using the discount cash flow method. Finally, profit projections for each year are discounted. The proposed method was applied using the ubiquitous home network system and audio service and illumination control method and results compared with the value of a technology valuation guide distributed by the Ministry of Trade, Industry and Energy. The technology valuation approach used in this research is quantitative and systematic and can be used as a decision making support tool in technology transfer, reflecting various perspectives of stakeholders.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.569-575
• /
• 2018

The need for ice-breaking research ships is growing as interest in the Arctic grows. In Korea the 7,500 ton ship Araon, launched in 2009, is the only icebreaker, and difficulty remains when conducting research at the North and South Pole. Thus, the Ministry of Maritime Affairs and Fisheries is pushing for the construction of a second icebreaker, and an economic valuation of a second icebreaker is needed. Such a study will help reduce controversy about the construction of a second icebreaker and help ensure reasonable decisions. The economic benefits of a second icebreaker were calculated using a contingent valuation method. In this study, a Bayesian Approach was applied, in contrast to previous methodology utilizing the maximum likelihood estimation method. According to this analysis, the average WTP per household was estimated at 1,999 won per year, and the total benefit from the construction of a second icebreaker was estimated at 373.9 billion won per year.

• Journal of the Korean Geographical Society
• /
• v.49 no.1
• /
• pp.45-56
• /
• 2014

Data composite methods have been typically applied to satellite-based vegetation index(VI) data to continuously acquire vegetation greenness over the land surface. Data composites are useful for construction of long-term archives of vegetation indices by minimizing missing data or contamination from noise. In addition, if multi-sensor vegetation indices that are acquired during the same composite periods are used interchangeably, data stability and continuity may be significantly enhanced. This study evaluated the influences of sensor geometry on MODIS vegetation indices and investigated data compatibility of two difference vegetation indices, the Normalized Difference Vegetation Index(NDVI) and the Enhanced Vegetation Index(EVI), for potential improvement of long-term data construction. Relationships between NDVI and EVI turned out statistically significant with variations among vegetation covers. Due to their curvilinear relationships, NDVI became saturated and leveled off as EVI reached high ranges. Correlation coefficients between Terra- and Aqua-based vegetation indices ranged from 0.747 to 0.963 for EVI, and from 0.641 to 0.880 for NDVI, showing better compatibility for EVI compared to NDVI. In-depth analyses of VI outliers that deviated from regression equations constructed from the two different sensors remain as a future study to improve their compatibility.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.169-174
• /
• 2016

In this study, we evaluated the virtual reality model for dental implant surgery and discussed about the method to make the surgical environment for virtual reality with practical patient data. The anatomical model for patient face was fabricated by facial and oral scan data based on CT data. The simulation scenario was composed step by step fashion with Unity3D. From incision and sinus bone graft procedure which is needed to this patient model to implant installation and bone graft was included in this scenario. We used the HMD and leap motion for immersiveness and feeling of real operation. Twenty training doctor was attended this simulation study, and surveyed their satisfactory results by questionnaire. Implant surgery education program was showed the possibilities of educational tool for dental students and training doctors. Virtual reality for surgical education with HMD and leap motion had advantages, in terms of cheap prcie, easy access.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.480-487
• /
• 2001

In children and adolescents, oral and maxillofacial trauma is one of the most common causes of dental and periodontal damage, which often induces crown fracture of the permanent anterior teeth. Frequently, these traumatized teeth lose their vitality, and require routine endodontic treatment if their root apices are closed. However if their apices are not fully closed, further root formation should be promoted by apexification or apexogenesis. Calcium hydroxide is a biocompatible & bacteriostatic material, and is widely used for apexification. However it has several disadvantages which include the need for multiple visits and patient cooperation, low strength and technical sensitivity in a broad apex. In one-visit apexification using IRM or SuperEBA, patient's visits can be minimized. However, their biocompatibility is questionable. Mineral trioxide aggregate(MTA) is a relatively new material. It is considered biocompatible with periapical hard tissue and has good marginal sealing ability. MTA is also known to help facillitate the growth of the cementum around it. In this case report, apexification with MTA was attempted on traumatized maxillary central incisors with immature root apices, and favorable clinical results were achieved.

• Korean Journal of Logic
• /
• v.15 no.2
• /
• pp.273-294
• /
• 2012

In my previous article "An Inferentialist Account of Indicative Conditionals" and "An Inferentialist Account of Indicative Conditionals and Hasuk Song's Objections", I argued that the so-called Uncontested Principle is not uncontestable. According to the Uncontested Principle, an indicative conditional '$A{\rightarrow}C$' logically implies a material conditional '$A{\supset}C$'. In his recent paper "On the Recent Controversies surrounding the Uncontested Principle" Wonbae Choi presents three objections to my claim. First, my denial of the Uncontested Principle implies rejecting modus ponens. Second, my denial of the Uncontested Principle is tantamount to taking the truth-conditions of an indicative conditional as weaker than those of a material conditional, which are usually taken to be the weakest among conditionals. Third, my view that we can warrantedly assert '$A{\rightarrow}C$' even when 'A ${\therefore}$ C' is inductively justified is based on a misunderstanding of the way in which indicative conditionals are justified. In this paper I argue that Choi's objections are all based on misunderstandings of my view. First, I do not deny the validity of modus ponens (as a form of deductive reasoning). Second, the fact that the inductive warrantability of 'A ${\therefore}$ C' does not imply the truth of '$A{\supset}C$' does not show that the truth-conditions of an indicative conditional is weaker than those of a material conditional. Third, Choi's claim that a contingent conditional '$A{\rightarrow}C$' is true only when 'C' can be deductively derived from 'A' in conjunction with a hidden premiss is not well grounded, nor does it fit the facts.

• Journal of Korea Technology Innovation Society
• /
• v.18 no.2
• /
• pp.233-263
• /
• 2015

This study considers the improvement of R&D promotion program and its investment efficiency for regional industry. We find out some problems of R&D promotion program and suggest plans to improve investment efficiency of R&D through practical analysis of achievement. Since the 2000s, our country has implemented diverse policies for regional industry; R&D for regional industry has become a core part of business from the point of view of regional industry. As ever, these policies are highly supported for the purpose of securing industrial competitiveness by the central government and local governments. This study, through practical analysis of certain region (Jeonbuk), reviews some problems of R&D promotion program and suggests plans to enhance the achievements of a variety of policies, strategies, and projects. We perform practical analysis using three methods for three different aspects: shift-share analysis for each industry type, performance analysis for each investment type and characteristic analysis for each company type. Reviewing the results of practical analysis, we suggest some plans to promote the collaboration of main R&D support organizations and to minimize the doubleness caused sporadically by the central government and local governments. This research will be used effectively in setting up, implementing, and evaluating R&D investments for regional Industry.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.9
• /
• pp.739-745
• /
• 2014

Although medication is given to heart disease patients, conventional medication alone is not sufficient to treat heart disease. However, it has been reported that left ventricular assist device (LVAD) transplantation is an effective bridge to heart transplantation by assisting cardiac function. This study used long-term animal testing and emergency situations with a bovine model (Holstein) and canine model (Labrador-retriever) to evaluate the biocompatibility of LibraHeart-I (LH-1), which is a bent-tube type of LVAD that was developed in a previous study. In the long-term animal testing with the bovine model, the subjects survived for 49 days with no irregularities observed in their complete blood cell counts or the vital sign tests that were carried out during the test period. In short-term animal testing with the canine model, it was observed that blood did not remain inside the LH-I even without power support from an external drive source. In this study, the biocompatibility of the LH-I that was developed in a previous study was verified by the ejection performance during long-term animal testing and emergency situations.

• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.77-88
• /
• 2006

The maintenance / repair of concrete pavements has become an issue as a result of increasing of concrete pavements' service year. Asphalt overlay is applied to the concrete pavements after partial repairs on all occasions. This thesis discusses the application standard, evenness, skid resistance, noise, economical efficiency, extension of life span, etc. of diamond grinding, a method of maintenance about concrete pavements. Based on this, it was applied to the field and measured the performance. It was measured the longitudinal evenness of before and after the construction through measurement equipment. and surveyed the skid resistance the each lane classified using the SN standard value. In case of noise, it is selected the kind of vehicle, velocity, then measured the noise between control and constructed site. In addition, it is evaluated the average texture depth. As a result of the analysis, longitudinal evenness is improved about $6{\sim}40%$, skid resistance is improved 66% at first section,37% at second section. Noise is reduced 3.4dB average, and average texture depth is 79% deeper than control section. Therefore, it can be concluded that diamond grinding is suitable as maintenance / repair method of concrete pavements.