Journal of the Korea Society of Computer and Information
/
제24권12호
/
pp.51-57
/
2019
In this paper, we analyzed the performance of IoT based smart wearable mine detection device. There are various mine detection methods currently used by the military. Still, in the general field, mine detection is performed by visual detection, probe detection, detector detection, and other detection methods. The detection method by the detector is using a GPR sensor on the detector, which is possible to detect metals, but it is difficult to identify non-metals. It is hard to distinguish whether the area where the detection was performed or not. Also, there is a problem that a lot of human resources and time are wasted, and if the user does not move the sensor at a constant speed or moves too fast, it is difficult to detect landmines accurately. Therefore, we studied the smart wearable mine detection device composed of human body antenna, main microprocessor, smart glasses, body-mounted LCD monitor, wireless data transmission, belt type power supply, black box camera, which is to improve the problem of the error of mine detection using unidirectional ultrasonic sensing signal. Based on the results of this study, we will conduct an experiment to confirm the possibility of detecting underground mines based on the Internet of Things (IoT). This paper consists of an introduction, experimental environment composition, simulation analysis, and conclusion. Introduction introduces the research contents such as mines, mine detectors, and research progress. It consists of large anti-personnel mine, M16A1 fragmented anti-mine, M15 and M19 antitank mines, plastic bottles similar to mines and aluminum cans. Simulation analysis is conducted by using MATLAB to analyze the mine detection device implementation performance, generating and transmitting IoT signals, and analyzing each received signal to verify the detection performance of landmines. Then we will measure the performance through the simulation of IoT-based mine detection algorithm so that we will prove the possibility of IoT-based detection landmine.
Koe, Yang Sim;Lee, Soo Yeon;Kim, Won;Cho, Soo Chul;Hwang, Pyoung Han;Kim, Jung Soo;Lee, Dae-Yeol
Clinical and Experimental Pediatrics
/
제46권7호
/
pp.687-694
/
2003
Purpose : Regeneration and repair after ischemic renal injury appears to be modulated by circulating or locally produced growth factors. This study examined the changes of serum insulin like growth factor(IGF-I) and renal expression of IGF-I and II, vascular endothelial growth factor(VEGF), transforming growth $factor-{\beta}$($TGF-{\beta}$), and connective tissue growth factor(CTGF) during the active regeneration period after acute ischemic injury. Methods : Sera and kidney tissue samples(whole kidney, cortex, outer medullae and inner medullae) were obtained before and after one, three, five and seven days of 40 minutes bilateral renal pedicle clamping. Acute renal failure was assessed by measuring the concentration of serum creatinine. Serum IGF-I level was measured by radioimmunoassay. The mRNA expression in kidney was measured by RT-PCR. The distribution of IGF-I and CTGF was detected by immunohistochemistry. Resuts : Serum IGF-I concentration after one day following acute ischemic renal injury was significantly decreased compared to preischemic value. The mRNA levels of IGF-I, IGF-II, $TGF-{\beta}1$ and VEGF in whole kidney were temporally decreased on day one of ischemic injury. IGF-I and IGF-II expressions in outer medullae were significantly decreased on day one after ischemic injury. $TGF-{\beta}1$, CTGF and VEGF expressions were markedly decreased in medullae after one day of ischemic injury compared to other kidney sections. IGF-I was markedly decreased in cortical tubules on day one of uremic rat. CTGF was markedly increased on tubule within three days of ischemic injury. Conclusion : These findings suggest that IGFs, $TGF-{\beta}1$ and CTGF may involve in the pathogenesis or the recovery from acute ischemic renal injury.
이 논문(論文)은 한국(韓國)의 우주(宇宙) 산업(産業) 발달(發達)과 그 과정(過程)을 고찰(考察)하고 현재 진행 중인 통신위성(通信衛星)의 개발(開發)과 그 사업(事業)을 뒷받침해 주는 국가(國家)의 정책(政策)을 살펴보고 있다. KOREASAT라고 명명(命名)된 통신위성(通信衛星) 개발(開發)에 현재 여러 기관이 관계(關係)하고 있으나 그 중 KARI(한국항공우주연구소(韓國航空宇宙硏究所)), ETRI(전자통신연구소(電子通信硏究所)), SERI(시스템공학연구소(硏究所)), KAIST(한국과학기술연구소(韓國科學技術硏究所)) 등이 중추적인 연구(硏究)를 하고 있다. 특히 이 논문(論文)에서는 아래와 같은 문제(問題)를 다루고 있다 첫째, 최근(最近) 한국우주개발(韓國宇宙開發) 상황(狀況) 둘째, 장기(長期) 우주개발(宇宙開發) 계획(計劃) 셋째, 현재(現在) 우주개발(宇宙開發) 상황(狀況)과 미래(未來) 우주개발(宇宙開發)에 관련한 정책(政策)적 문제(問題) 넷째, 한국(韓國) 우주개발(宇宙開發)과 정책(政策) 방향(方向)에 대한 의견(意見) 최근의 한국우주개발(韓國宇宙開發) 상황(狀況)은 크게 한국(韓國)의 통신위성(通信衛星) 사업(事業)인 Koreasat program과 다목적 위성사업(衛星事業)인 KOMSAT로 나타나는데 한국(韓國)의 최초 상업용(商業用) 위성(衛星)인 Koreasat는 1호가 1995년도에 발사(發射)되었으나 정상궤도(正常軌道) 진입(進入)에 문제(問題)가 발생하여 발사업체(發射業體)로부터 보상문제(補償問題)가 제기(提起)되기도 하였으나 2호는 성공리에 발사(發射)되었다. 미국항공우주회사(美國航空宇宙會社)와 공동(共同)으로 개발(開發)중인 새로운 과학위성(科學衛星)인 KOMSAT는 한국우주과학기술(韓國宇宙科學技術)을 한단계 더 발전(發展)시킬 수 있을 것이고 1999년도에 발사(發射) 계획(計劃)이다. 한국항공우주연구소(韓國航空宇宙硏究所) 중심(中心)의 장기(長期) 우주개발(宇宙開發) 계획(計劃)에서 제시(提示)하는 4가지 우주개발(宇宙開發)의 기본목표(基本目標)는 첫째, 우주산업응용산업(宇宙産業應用産業)의 상호협조개발(相互協助開發)에 의한 우주산업(宇宙産業) 육성(育成) 둘째, 한국(韓國)의 현재 우주산업상황(宇宙産業狀況)에 알맞은 특정분야(特定分野)를 선정(選定)하고 이 분야(分野)에서 최단기에 세계(世界) 최고의 기술수준을 성취(成就)하도록 집중(集中) 셋째, 외국과 긴밀한 협조(協助)로 선진기술(先進技術)의 습득(習得) 넷째, 체계적이고 통합(統合)된 장기우주산업발전(長期宇宙産業發展) 계획(計劃) 성립(成立) 등이다. 이러한 계획(計劃)에 주요 사안(事案)으로는 2015년까지 19기의 인공위성(人工衛星) 보유(保有)를 위한 제작계획(製作計劃)과 2010년까지 발사체(發射體) 개발(開發)을 마련하는 것이다 현재 우주활동(宇宙活動)에 관련된 문제(問題)는 주로 Koreasat의 서비스와 사용계획(使用計劃)에 대한 것으로 위성개발사업(衛星開發事業)에 있어서 관련 정부부서간(政府部署間)에 의견(意見)을 달리하고 있는 형태이다. 한국통신(韓國通信)과 정보통신부(情報通信部)는 위성(衛星)의 DBS 트랜스폰더에 대해 디지털 방식(方式)을 적용(適用)할 것을 제안(提案)했지만 공보처(共報處)는 반대(反對)의 입장(立場)을 표명(表明)한 것과 방송국(放送局)의 관리(管理)와 통제(統制)는 공보처(共報處)에 있고 무선통신표준(無線通信標準)에 대한 면허(免許)는 정보통신부(情報通信部)에 있기 때문에 방송국(放送局)에 대한 면허(免許)는 각기 다른 두 단계(段階)로 구성(構成)되는 문제(問題)가 발생(發生)한다. 또한 DBS 서비스에서 사기업(私企業)의 참여(參與)와 관련하여 재벌(財閥)의 참여(參與)를 허용(許容)하느냐의 여부(與否)의 논쟁(論爭)이다. 다음으로 미래(未來) 우주산업개발(宇宙産業開發)에 관한 정책문제(政策問題)를 살펴보면 국가적(國家的) 차원(次元)에서 조직적(組織的)인 육성책(育成策)에 대한 문제(問題)로 현재 주관 부처가 과학기술처(科學技術處)와 통상산업부(通商産業部)로 나뉘어 추진(推進)되고 있다는 점이다. 그리고 차세대(次世代) 통신위성개발(通信衛星開發) 계획(計劃)에 대한 문제(問題)로 최소 2${\sim}$4개의 궤도확보(軌道確保)와 이미 정상궤도(正常軌道) 진입(進入) 실패(失敗)에 따른 Koreasat 1호의 생명단축(生命短縮)으로 새로운 통신위성(通信衛星)을 4년이내에 발사(發射)해야 한다는 문제(問題)이다. 결론적으로 장기(長期) 우주개발계획정책(宇宙開發計劃政策)에 있어서 첫째, 국제적 우주개발사업(宇宙開發事業)에 대한 적극적(積極的) 참여(參與), 둘째, 우주(宇宙)에서 독립적(獨立的)인 활동(活動)을 할 수 있는 국가안보체제(國家安保體制)의 개발(開發), 셋째, 국가(國家) 위상(位相)의 발전(發展)과 우주개발(宇宙開發)을 위한 인력활용(人力活用)의 개발(開發), 넷째, 무한한 우주(宇宙)에 도전(挑戰)할 수 있는 우수(優秀)한 인재(人才)의 교육(敎育), 다섯째, 21세기를 대비(對備)하여 한국(韓國)의 우주개발정책(宇宙開發政策)의 결정(決定) 등이 고려(考慮)되어야 할 5가지 요소(要所)들이다. 그리고 막대(莫大)한 비용(費用)이 드는 우주개발사업(宇宙開發事業)을 효율적으로 추진(推進)하기 위해서는 국가(國家) 최고(最高) 지도자(指導者)의 직접지휘(直接指揮)를 받는 정부기구(政府機構)가 수립(樹立)되어 정부차원(政府次元)에서 추진(推進)하되 산학연(産學硏)이 협조(協助)하여 우주개발계획(宇宙開發計劃)을 추진(推進)하여야 할 것으로 본다.
Kim, Dongsu;Seo, Youngcheol;You, Hojun;Gwon, Yeonghwa
Journal of Korea Water Resources Association
/
제56권3호
/
pp.195-210
/
2023
Additional deposition and erosion in large rivers in South Korea have continued to occur toward morphological stabilization after massive dredging through the four major river restoration project, subsequently requiring precise bathymetry monitoring. Hyperspectral bathymetry method has increasingly been highlighted as an alternative way to estimate bathymetry with high spatial resolution in shallow depth for replacing classical intrusive direct measurement techniques. This study introduced the conventional Optimal Band Ratio Analysis (OBRA) of hyperspectral bathymetry method, and evaluated the performance in a domestic large river in normal turbid and flow condition. Maximum measurable depth was estimated by applying correlation coefficient and root mean square error (RMSE) produced during OBRA with cascadedly applying cut-off depth, where the consequent hyperspectral bathymetry map excluded the region over the derived maximum measurable depth. Also non-linearity was considered in building relation between optimal band and depth. We applied the method to the Nakdong and Hwang River confluence as a large river case and obtained the following features. First, the hyperspectal method showed acceptable performance in morphological mapping for shallow regions, where the maximum measurable depth was 2.5 m and 1.25 m in the Nakdong and Hwang river, respectively. Second, RMSE was more feasible to derive the maximum measurable depth rather than the conventional correlation coefficient whereby considering various scenario of excluding range of in situ depths for OBRA. Third, highly turbid region in Hwang River did not allow hyperspectral bathymetry mapping compared with the case of adjacent Nakdong River, where maximum measurable depth was down to half in Hwang River.
Bang, Jei So;Kim, Myong Sik;Kwak, Seung Min;Cho, Chul Ho
Tuberculosis and Respiratory Diseases
/
제44권1호
/
pp.52-58
/
1997
Background : Tuberculous pleurisy has been treated With a combined regimen of corticosteroids- antimicrobial therapy. But whether such combination therapy add to benefits is unknown. We evaluate the effects of corticosteroid and its routine application in relief of clinical symptoms, absorption of pleural effusion, and pleural adhesions. Methods : A prospective, randomized study of the role of corticosteroid in the treatment of tuberculous pleurisy was performed in 83 patients(nonsteroid group: 50 patients, steroid group: 33 patients) from June, 1991 to September, 1994. Results : 1) The mean duration from symptoms(fever, chest pain, dyspnea) to relief was 3.8 days in the steroid group, and 7.4 days in the nonsteroid group(P<0.05). Clinical symptoms including fever, chest pain, sputum and weight loss were relieved more rapidly in the steroid group than other symptoms(weakness, night sweating and dyspnea). 2) Pleural effusion was taken an averge of 88 days in the steroid group and 101 days in the nonsteroid group 10 be absorbed completely(p>0.05) 3) The incidence of pleural adhesions was 17/33(5l.5%) in the steroid group and 32/50(64%) in the nonsteroid group(p>0.05) 4) Side effects of corticosteroids were observed in only one patient causing epigastric pain and discontinuation of drug. Conclusion : Corticosteroid exert benefitial role in the more rapid relief of clinical symptoms to patients with tuberculous pleurisy, but absortion of pleural effusion and occurrence of pleural adhesions was not influenced significantly Therefore, its routine application should be reevaluated.
The purpose of this study is to present the specific ways of successful localization by analyzing the success and failures case for localization within the framework of the strategic models through a theoretical background and strategic models of localization. The strategic models of localization are divided by management aspects such as the localization of product and sourcing, the localization of human resources, the localization of marketing, the localization of R&D, harmony with a local community and delegation of authority between headquarters and local subsidiaries. The results, by comparing and analyzing the success and failures case for localization of individual companies operating in India, indicate that in terms of localization of product and sourcing, there are successful companies which procure a components locally and produce a suitable model which local consumers prefer and the failed companies which can not meet local consumers' needs. In case of localization of human resources, most companies recognize the importance of this portion and make use of superior human resource aggressively through a related education. In case of localization of marketing, It is found that the successful companies perform pre-market research & management and build a effective marketing skills & after service network and select local business partner which has a technical skills and carry out a business activities, customer support, complaint handling with their own organization. In terms of localization of R&D, the successful major companies establish and operate R&D center to promote a suitable model for local customers. In part of harmony with a local community, it shows that companies which made a successful localization understand the cultural environment and contribute to the community through CSR. In aspect of delegation of authority between headquarters and local subsidiaries, it is found that most of Korean companies are very weak for this part. there is a tendency to be determined by the head office rather than local subsidiaries. Implication of this thesis is that Korean enterprises in India should carry forward localization of products and components, foster of local human resource who recognize management and system of company and take part in voluntary market strategy decision, wholly owned subsidiary, establishment and operation of R & D center, understanding of local culture and system, corporate social responsibility, autonomy in management.
A simplest and best method to find out lime requirement for Korean soils is described. Twenty six top soil samples were collected from various localities and chemical characteristics were dertermined. Three different buffer curve methods were employed as the standard to find out the most reliable test for lime requirement. In addition, the lime requirement test by the Shoemaker's and Woodruff's as well as the O.R.D. kit method were compared with the most reliable buffer curve method. The results may be summarized as follows. 1. The regression equation of the most reliable lime requirement by buffer curve method, y, on percent base saturation of various soils, X, was y=9.69-0.106 X and the negative correlation coefficient r=-0.84 was statistically significant at 5% level. 2. Lime requirement test by the best, buffer curve, method was more well correlated with the sum of exchangeable hydrogen and exchangeable aluminum contents of the soil samples than the exchangeable hydrogen content only. 3. The ordinary buffer curve method for lime requirement is more reasonable than the lime requirement test by the buffer curve prepared after addition of 1 normal potassium chloride or calcium chloride solutions. 4. The lime requirement tests by the most reasonable buffer curve method, X, and by the Woodruff's, the Shoemaker's and O.R.D. kit were compared. The best method for laboratory lime requirement test was the Shoemaker's method and the O.R.D. kit method also was good enough for the field test and these two method are recommended as the unified method of lime requirement test in each soil testing laboratories throughout Korea.
In the development process, small and medium-sized enterprises in China have shown their unique features and regularities which are closely related to China's national condition and economic characteristics. But in 2008, because of the global financial crisis which started in the USA, the rate of Chinese export and the rate of economic growth has evidently slowed. Due to shortage of funds, foreign orders fell, increase the value of RMB, lack of talented factors, Chinese SMEs are facing bankruptcy. In this context, the purpose of this study is to examine the effects of domestic and international market environment, the government assistance for entering overseas market, entrepreneur characteristics, etc. on the global performance. Based on these, a research model and some hypotheses were set up and tested by the multiple regression analysis with total 317 effective survey data. The results of this paper are as follows. First, a positive effect relation on the financial performance was shown for the companies with high domestic and international market environment in the aspect of market environment. According to such analysis result, it was found that the market environment in which SMEs belong to is a very important factor. Second, in the aspect of government export assistance related to overseas, market development showed a positive effect relation on the both financial and non-financial performance. However, the direct financial assistance showed a positive effect relation only on the non-financial performance. Overall, it was found that the government assistance program on entering overseas market is having significant effects on SMEs, but direct financial assistance have not achieved the desired results. Third, the innovative-ness and progressiveness of entrepreneur showed a positive effect relation on the global market performance. However, the risk-taking of entrepreneur only showed a negative effect relation on the non-financial performance. Overall, it was found that the entrepreneurship of SMEs is an important and influential factor. This is a result implying that the propensity of taking too much risk is not desirable based on the uncertainty of the global environment market. To sum up, this study confirmed that the market environment, the government assistance and entrepreneur characteristics, which are the major prerequisites of global performance, have effects on global performance.
The frictional force has been considered as an harmful factor in an active unit where tooth movement occurs, but as an advantageous factor in anchor unit that resist tooth movement. That is, efficient tooth movement is planned by using ligation methods that have low levels of bracket-wire frictional force and the anchorage control can be achieved by using ligation methods that have high levels of bracket-wire frictional force that result in binding of the bracket accompanied by little or no tooth movement. The purpose of this study was to evaluate the frictional force generated between bracket and wire in accordance with the methods of ligation, the material of ligation and the passage of time under artificial saliva. Tested were 0.017x0.022 inch stainless steel wires in standard edgewise twin brackets for upper central incisors in a 0.018-inch slot. The wires were ligated into the brackets with elastomeric modules and stainless steel ligatures. Whole tie, half tie, twisting tie and double overlay tie were done with elastomeric modules. With 0.009-inch stainless steel ligature whole tie and half tie were done by needle holder and whole tie by ligature tying plier. With 0.012-inch stainless steel ligature whole ties were done by needle holder. Whole tie groups of elastomeric module were kept in artificial saliva bath at $37^{\circ}C$ for 28 days. The frictional force was recorded by means of an Instron universial testing instrument (4202 INSTRON, Instron Co., U.S.A.) at initial, 7, 14, 21, and 28 days. The results for ligated samples in a simulated oral environment revealed the fellowing : ${\cdot}$In elastomeric module whole tie, 28 days group was significantly greater mean static frictional force than any other group but there were no significant differences among any other group (p>0.05). ${\cdot}$Elastomeric module twisting ties were significantly greater mean static frictional forces than any other ligation method but there were no significant differences between twisting tie and double overlay tie (p>0.05). Twisting tie, double overlay tie, whole tie, half tie showed differences in decreasing order. ${\cdot}$Stainless steel half tie produced lower mean static frictional force than whole tie, ligation by ligature tying plier produced greater mean static frictional force than by needle holder and ligation with 0.012-inch stainless steel ligature produced greater mean static frictional force than with 0.009-inch stainless steel ligature (p<0.05). ${\cdot}$There were no significant differences between the mean static frictional forces of elastomeric whole tie and stainless steel whole tie (p>0.05).
Park, Choung-Kyu;Park, Pyo-Won;Jun, Tae-Gook;Park, Kay-Hyun;Chae, Hurn
Journal of Chest Surgery
/
제32권4호
/
pp.368-372
/
1999
Background: Although there have been few reports about minimal skin incision for the repair of congenital heart lesions, minimizing an unsightly scar is a particularly important factor in growing children. We have adopted a technique that permits standard full sternotomy, conventional open chest cardiopulmonary bypass, aortic cross-clamping, left atrial vent, and antegrade cardioplegia with minimal surgical scar. Material and Method: With minimal skin incision and full sternotomy, 40 patients with congenital heart disease underwent open heart surgery from April 1997 through September 1997. Defects repaired included 30 ventricular septal defects, 4 atrial septal defects, and 1 sinus Valsalva aneurysm in 35 children(M:F=17: 18), and 3 Atrial septal defects, 1 ventricular septal defect, and 1 partial atrioventricular septal defect in 5 adults(M:F=1:4). Midline skin incision was performed from the second intercostal space to 1 or 2 cm above the xiphoid process. For full sternotomy, we used the ordinary sternal saw in sternal body, and a special saw in manubrium under the skin flap. During sternal retraction, surgical field was obtained by using two retractors in a crossed direction. Result: The proportion of the skin incision length to the sternal length was 63.1${\pm}$3.9%(5.2∼11cm, mean 7.3cm) in children, and 55.0${\pm}$3.5%(10∼13.5cm, mean 12cm) in adults. In every case, the aortic and venous cannulations could be done through the sternal incision without additional femoral cannulation. There was no hospital death, wound infection, skin necrosis, hematoma formation, or bleeding complication. Conclusion: We conclude that minimal skin incision with full sternotomy can be a safe and effective alternative method for the repair of congenital heart diseases in children and adults.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.