• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.7 no.2
• /
• pp.55-72
• /
• 1997

This paper presents a digital signature scheme for facsimile document which directly embeds a signature onto the document. We use multiple reference lines which have been scanned just before and modify each distance of changing pels both on the reference line specified by key and on the coding line with a single bit of the signature data. The time to take in signature is reduced by spreading of signature. Non-repudiation in origin, the 3rd condition of digital signature is realized by proposed digital signature scheme. The transmitter embeds the signature secretly and transfers it, and the receiver makes a check of any forgery on the signature and the document. This scheme is compatible with the ITU-T.4(CCITT G3 or G4 facsimile standards). The total amount of data transmitted and the image quality are about the same to that of the original document, and thus a third party notices that no signature is embedded on the document.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.382-394
• /
• 2022

The treatment of patients with severe periodontitis should be proceeded step-bystep through an accurate diagnosis of each patients' individual tooth and with a strategic treatment plan. Implant-supported fixed prosthetic restoration has the advantage of high patient satisfaction and stable vertical dimension compared to the removable partial denture. However, multiple teeth defect areas lacking hard tissue may be disadvantageous in aesthetic failure and longer treatment time. In addition, it takes a certain period of time to manufacture and install a conventional fixed prosthesis, and during this process, the provisional prosthesis must satisfy the mechanical, biological, and aesthetic requirements of teeth. The purpose of this article is to describe the fabrication of implant-supported fixed prosthesis through a step-by-step approach in a partially edentulous patient.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.211-215
• /
• 2021

It is estimated that there are 40 million people with AIDS worldwide, with most cases occurring mainly in developing countries. HIV, the virus that causes AIDS, is infected with CD4+ T cells in the blood and gradually destroys CD4+ T cells for several months to 10 years, thereby lowering the patient's immune function. AIDS patients who have weakened immunity in this way will die from various diseases. The current method for counting the number of CD4+ T cells is usually performed by flow cytometry. The flow cytometry method has the advantage of high accuracy, but it is difficult to use in developing countries because it requires skilled professionals and equipment is expensive. As a result of this study, a device for AIDS screening was developed by capturing leukocytes from a small amount of 5 ㎕ blood through a microfilter and analyzing CD4+ T cells and CD8+ T cells from the captured cells. cheaper and easier to carry and use than current test equipment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.354-361
• /
• 2022

The development of digital technology is causing great changes in dentistry. This digital workflow combines various 3D data in the prosthetic treatment area for diagnosis and prosthetic manufacturing. The planned diagnosis and the fabrication of prosthesis in a virtual patient formed by synthesizing digital data can simulate the results of prosthetic treatment more intuitively than conventional methods, thereby increasing the predictability of aesthetic prosthetic treatment. In this case report, functionally and aesthetically satisfied clinical results were obtained by fabricating a fixed partial dentures through a digital workflow on congenital missing teeth in the maxillary anterior region.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.146-153
• /
• 2023

In accordance with the industrial convergence regulation sandbox decision promoted by the Ministry of Trade, Industry and Energy, the "machine tool sharing service in the factory" applied for by MyMaker Co., Ltd., an industry-academia cooperation company, was granted a demonstration exception. While implementing this, in a situation where the ordering service part had to be developed as software, the company's domain problems were identified and analyzed, procedures were established, and a system was designed that met the related requirements. As a joint research and development project to solve the difficulties of the LINC+ industry, the order-to-order system was finally developed for shared factory services. In accordance with the procedure and requirements analysis, the planning, design, prototyping, and implementation production stages were carried out. Finally, it was confirmed that the final development contents were well implemented according to the requirements, and the resolution of the difficulties was confirmed through functional verification demonstrations.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.3
• /
• pp.161-167
• /
• 1992

We consider the preparation of long finite amplitude nondispersive waves over a step bottom between two regions of finite different depths. Two dimensional motion is assumed. with the wave crests parallel to the step, and irrotational flow in the inviscid fluid is considered. To describe the transformation of finite amplitude waves we use the finite-amplitude shallow-water equations, the conditions of mass flow conservation and pressure continuity at the cut above the step in Riemann's variables. The equations define four families of curves-characteristics on which the values of the Riemann's invariants remain constant and a system of two nonlinear equations that relates the amplitudes of incident reflected and transmitted waves. The system obtained is difficult to analyze in common form. Thus we consider some special cases having practical usage for tsunami waves. The results obtained are compared with the long wave theory and significant nonlinear effects are found even for quite small amplitude waves.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.457-457
• /
• 2022

최근 기후변화로 인한 위기가 인류의 생존을 위협하면서 전 지구적으로 기후변화에 대응하기 위한 탄소 중립 대책을 모색하고 있으며, 지속가능한 신재생에너지에 대해 주목하고 있다. 산업통상자원부는 2034년까지 총 발전량 중 신재생에너지의 비율을 25.8%까지 증가시키는 것을 목표로 신재생에너지의 발전 비율을 증가시키기 위한 다양한 노력을 기울이고 있다. 특히, 신재생에너지 중 가장 많은 비중을 차지하고 있는 태양광 발전은 비교적 광범위한 부지를 필요로 하고 있으며, 환경 및 지형적 영향이 크게 작용하는 만큼 발전 시설 부지 선정 및 운용 계획을 위한 면밀한 분석이 필수적이다. 그러나, 태양광 발전 활용 계획을 수립하기 위해 고려할 수 있는 지상 관측 일사량 및 일조량 데이터는 상당히 제한적이며 관측 밀도가 조밀하지 않다는 한계점이 있다. 본 연구에서는 천리안위성의 후속으로 발사된 천리안2위성의 산출물인 일사량 데이터를 활용하여 한반도 영역에서의 일사량에 대한 시·공간적 분석을 수행하였으며, 이를 기반으로 각 지역적 특성을 파악하고, 토지 피복 유형에 따른 태양광 발전의 효율 정도를 분석·평가하였다. 본 연구의 결과는 계측 지역 및 미계측 지역에서의 시공간적인 태양광 에너지의 효율성에 대한 정보를 제공함에 따라 태양광 발전을 위한 관련 시설물들의 최적 설치 위치 및 규모 등에 대한 설계 기준 마련에 활용될 수 있을 것으로 판단된다.

• Journal of the Korean Institute of Gas
• /
• v.28 no.2
• /
• pp.56-65
• /
• 2024

This study was conducted for the purpose of analyzing the impact of ESG activities of gas-related energy companies (organizations) striving for carbon neutrality on job performance through employees' organizational pride and organizational trust. The survey results of 345 gas-related public organizations and private companies were analyzed using Smart PLS 4.0, and the research model and hypothesis were established and verified. As a result of the verification, ESG activities related to environmental (E) activities did not affect organizational pride and organizational trust, but social (S) activities and governance (G) activities were found to have a significant impact on organizational pride and organizational trust. In addition, organizational pride and organizational trust were found to have an effect on job performance. In particular, it was confirmed that the higher the organizational pride of ESG organization members, the higher the impact of organizational trust on job performance. The study seek to suggest a development direction relation to ESG activities of gas-related energy companies (organizations).

• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.381-391
• /
• 2001

In orthodontic patients, frequently, amalgam restorations are present on the buccal surface of molars. The ability to successfully bond orthodontic brackets and buccal tubes to amalgam restorations would therefore be of clinical value. But the bond strength to total amalgam surface is probably not critical in most instances. Because there is usually a considerable amount of sound enamel surrounding a buccal amalgam filling. The purpose of this study was to evaluate the bond strengths of orthodontic brackets according to surface treatments and size of amalgam restorations. Eighty tooth specimen were assigned to four groups according to amalgam size-1.5mm, 2.0mm, 2.5mm, 3.0mm diameter-and then divided into two groups : one half was sandblasting group the other half was no sandblasting group. After Bracket bonding, shear bond strength for each specimen was determined and bond failure patterns was evaluated. 1. Shear bond strength of amalgam size 1.5mm group was significantly higher than that of the other groups. (p<0.05) 2. There was no significant difference in the bond strength produced by sandblasting. (p<0.05) 3. Shear bond strength of G and H group of which amalgam restoration ratio to the bracket base sizes were $61\%$ were significantly decreased $50-60\% level of that of control group. (p<0.05) 4. There was positive correlation between sandblasting and mARI. (p<0.05) The results of the present study indicate that it may be feasible to bond orthodontic bracket clinically successfully to amalgam restoration with conventional orthodontic resin when its size is less than $50\%$ of that of bracket base.

• International Commerce and Information Review
• /
• v.15 no.1
• /
• pp.35-65
• /
• 2013

In December 2012, the Ministry of Land, Transport and Maritime Affairs and Ministry of Knowledge Economy held a commission and distributed a standardized logistics contract between the shipper and the logistics companies in order to spread and to promote contract standardization. With such background in place, this study examines the leading research on different types and attributions in present logistics contracts in order to propose guidelines for creating contract clauses that would lead to a win-win relationship among the parties involved in the logistics outsourcing relationships. This study further compares and contrasts the concreteness of local and international logistics contracts through case studies, and provides practical thought-provoking points on concretization of clauses on potential risks and additional expenses for local logistics companies when signing logistics contracts. Firstly, the composition and contents of both local and international logistics contracts are similar in the way that both deal with the basic principles between the concerned parties such as the following: contract terms, validity, scope of work, operational procedures, payment terms, and dispute resolutions. Secondly, for flexibility of potential dispute resolution, both logistics contracts define the definition of dispute and follow the classical contractual approach of dispute resolution through third-party arbitration. Thirdly, compared to local contracts, international logistics contracts provide more concretized and specific clauses on the occurrence of potential risks and hazards; on the other hand, compared to international logistics contracts, it seemed that local contracts contained more clauses in favor of the shipper. This research then suggests ideas to eliminate the classic tradition - logistics companies enduring the damages that occur as a result of the structural differences between the shipper and the logistics companies - through efforts to actively negotiate in advance the predictable problems and risks and by reflecting the mutually agreed points in the contract, and further offers guidelines on contract concretization for distribution of standardized logistics contracts in the future.