• Geotechnical Engineering
• /
• v.28 no.6
• /
• pp.12-24
• /
• 2012

• 핵융합뉴스레터
• /
• s.35
• /
• pp.1-8
• /
• 2007

ITER 협정 비준동의안 통과/핵융합&플라즈마 연구개발 성과/김우식 부총리 축사/KSTAR 10대 기술성과/KSTAR TF·PF 전류전송계 진공배기 시험 성공/핵융합 연구동향/국제협력/워크샵.세미나/내방인사/대중과 함께하는 핵융합/NFRC 이모저모/

• Geotechnical Engineering
• /
• v.28 no.5
• /
• pp.10-22
• /
• 2012

• Water for future
• /
• v.52 no.8
• /
• pp.93-100
• /
• 2019

• Water for future
• /
• v.52 no.4
• /
• pp.16-36
• /
• 2019

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1237-1242
• /
• 2016

In this paper, the low pass filter with harmonics suppression and rejection using parallel coupled-line and radial type open stub is presented. And the resultant characteristic of the proposed low pass filter is that the harmonics are suppressed and rejected in wide bandwidth due to the parallel coupled-line structure. The open stub of a low pass filter is constructed in radial type which can be used to adjust the size of filter. The size of the proposed low pass filter is $6.98{\times}7.60mm2$ and the cut off frequency is 2.45 GHz. And the filter is economical in unit cost and can be constructed easily and has the merit of mass product because the filter is composed of distributed element. Also, the widely rejected harmonics is 128 % in the bandwidth and the insertion and return losses of the low pass filter are 1.07 dB and 19.5 dB, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.7 s.98
• /
• pp.760-767
• /
• 2005

In this paper, we proposed a new type SIR bandpass filter using DAMLs. This filter is consisted of 2 layers with MEMS resonator layer and CPW feed line. DAMLs ring resonator is elevated with $10{\mu}m$ height from GaAs substrate. Using MEMS processing, we are able to realize SIR bandpass filter easily. Furthermore it is useful to integrate on conventional MMICs because it has CPW interfaces and ring resonator is isolated from substrate by air-gap. We optimized and measured the results that $S_{21}$ attenuation at rejected band is over 15 dB, insertion loss is inside the limit of 3 dB, and relative bandwidth is about $10\%$ at 60 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.117-123
• /
• 2006

In this paper, a CPW lowpass filter with the spurious-reduced characteristic is designed by using DGS(Defected Ground Structures). By cascading two lowpass filters with different harmonic characteristics the spurious is reduced below - 15 dB. Additionally by combining a dumbbell shaped DGS to the filter we achieved a satisfactory spurious level of less than -25 dB to above three times cutoff frequency without any repeated passband. The fabricated LPF shows a compact size of $17.2mm{\times}6.8mm$, a cutoff frequency of 6 GHz, and a sharp skirt response of 7-order with two notch frequencies. The measured frequency responses agree well with simulated ones.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.7 s.110
• /
• pp.673-683
• /
• 2006

In this paper, we investgate variation of phase and magnitude characteristics which become different as the variables of DGS are changed and propose the new method to easily decide the best optimum DGS pattern taking advantage of this trend. Generalized Chebyshev(GC) low pass filter(LPF) is designed by using DGS obtained from this method GC DGS LPF is more available for filter application than Chevyshev DGS LPF because GC LPF have parallel resonators as series circuits, therefore unlikely Chebyshev LPF, transform step of the series elements can be omitted. By using the proposed method, GC DGS LPF(N=5) and as a subject of comparison, conventional Chbyshev LPF(N=7) are designed and implementation. From the comparison of the measured data, we confirmed that the implemented GC DGS 5th order LPF have much better cutoff characteristics and reduce by 0.58 times size, on the other hand the stop bandwidth become widen about 1.57 times or more in comparison with the conventional Chevyshev 7th order LPF.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.4
• /
• pp.418-426
• /
• 2008

In this paper, investigations on the impedance characteristics of a DGS(Defected Ground Structure) slot in the groud plane of microstripline are presented in spectral domain and applied to the characteristic improvement of stepped impedance microstrip low pass filter(LPF). In this method, expressions for the impedance of a DGS slot are derived from self-reaction of the angular spectrum of plane waves and the discontinuity in the modal voltage. The numerical results are compared with those of the rigorous full-wave method and are shown to produce reasonably accurate data. And the stepped impedance microstrip low pass filter is designed and fabricated with the uniform and nonuniform DGS slots for improving the frequency responses. The experiments show that the proposed filter with slots in the ground plane has a wider stopband and sharper cutoff response.