• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.445-457
• /
• 2016

The purpose of the study is to provide frame work of efficient diagnostic and treatment protocol for the people with malpositioned pelvic which causes imbalance of body. Study subjects were grouped as experimental, comparison and control group. Each group consisted of five men and five women randomly assigned. Experimental group was to be tested with Thompson Terminal Technique, its corrective effect and the effect of maintaining the treatment. There were 43.01%p difference in effectiveness of the applied technique between Thompson Terminal Technique and Muscle Energy Technique. It indicates that Thompson Terminal Technique is more effective in treating pelvic misalignment than Muscle Energy Technique. As a result, the use of chiropractic and resistance exercises is proven to be effective for treating the imbalance of body. Also, to maximize the effect of treatment, it is preferable to apply Muscle Energy Technique after applying the Thompson Terminal Technique.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.8
• /
• pp.703-710
• /
• 2000

Energy separation characteristic occurring in a counterflow vortex tube was studied experimentally, where air, $C_2$, and R22 were used as working fluids. The experiments were carried out with pressure ratio from 3 to 8 and cold mass fraction(y) from 0.1 to 0.9. As results, Ranque-Hilsch effect showed different results from adiabatic expansion process. Temperature difference in vortex tube outlet was affected by Joule-Thomson effect as well as Ranque-Hilsch effect. The more effective the energy separation was, the more increased the entropy in the cold oulet of vortex tube was.

• Journal of the Speleological Society of Korea
• /
• no.75
• /
• pp.65-71
• /
• 2006

팰티어-열전소자를 응용한 냉온컵홀더를 구성하는 응용기술을 제안하였다. 열전소자의 용량에 제한을 받기 때문에 가열 또는 냉각을 위해서는 충분한 용량을 뒷받침 해 줘야 한다. 따라서 컵홀더와 같은 휴대 필요성이 요구되거나 휴대 가능한 소형기기의 경우에는 온열 또는 냉각 상태를 유지시키는 보온기능을 갖는 온열기기로써의 적합성을 확인하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.10-19
• /
• 1998

The erosion of electrode in spot welding of aluminium alloy by direct current is dependent on the electric polarity. The positive electrode is much more eroded than the negative one. To explain this phenomenon, Peltier effect has been generally accepted as a unique theory. In this study Peltier effect was evaluated by calculations on the basis of some references and experiments. The difference of heat generated by Peltier effect on both electrode surfaces was, however, only 4% of total heat generated during wel- ding. Because of insufficient explanation, Kohler theory, which is mainly affected by thin oxide film, was introduced. A theoretical calculation showed 17% of the temperature difference between the positive and negative electrode, in case "surface voltage" resulted from oxide film was 30% of total contact voltage. This revealed that the erosion of electrode could be more affected by Kohler theory than effect.an effect.

• Electrical & Electronic Materials
• /
• v.9 no.1
• /
• pp.67-75
• /
• 1996

This paper has presented the characteristics of thermoelectric devices and the plots of thermoelectric cooling and heating as a function of currents for different temperatures. The maximum cooling and heating(.DELTA.T) for (BiSb)$\_$2/Te$\_$3/ and Bi$\_$2/(TeSe)$\_$3/ as a function of currents is about 75.deg. C, A solderable ceramic insulated thermoelectric module. Each module contains 31 thermoelectric devices. Thermoelectric material is a quaternary alloy of bismuth, tellurium, selenium, and antimony with small amounts of suitable dopants, carefully processed to produce an oriented polycrystalline ingot with superior anisotropic thermoelectric properties. Metallized ceramic plates afford maximum electrical insulation and thermal conduction. Operating temperature range is from -156.deg. C to +104.deg. C. The amount of Peltier cooling is directly proportional to the current through the sample, and the temperature gradient at the thermoelectric materials junctions will depend on the system geometry.

• Journal of the Korean Institute of Gas
• /
• v.24 no.1
• /
• pp.23-32
• /
• 2020

It is not easy to fully fuel high pressure(70 MPa) hydrogen in a hydrogen vehicle tank quickly. This is because the temperature inside the tank rises rapidly due to heat caused by the Joule-Thomson effect, etc. So fueling protocols such as SAE J2601 in the U.S. and JPEC-S 0003 in Japan appeared. However, there is a problem with these protocols that a number assumption are introduced and the content is too complex and limited in scope. This study was conducted to develop a new protocol based on complete real-time communication. In this study, the hydrogen fueling simulation program were used to examine how the pressure ramp rate affects the temperature and pressure rise in the tank and the fueling flow rate. The results confirmed that the first parameter to be considered in determining the pressure ramp rate is the temperature of the tank.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1717-1723
• /
• 2003

Experimental study is conducted to investigate the cooling performance of impinging jet from microtube using Joule-Thomson effect to apply practical applications. And also the heat transfer characteristics of a impinging jet itself and the impinging jet with Joule-Thomson effect are tested to make a comparative study of the two different general ideas. For this propose, two kinds of copper microtubes which have 200 tim and 300 tim in inner diameter respectively were tested and $N_2$ was used as a working fluid. In case of impinging jet without Joule-Thomson effect, heat transfer coefficients distributions were similar to those of normal impinging jet. But in impinging jet with Joule-Thomson effect, the heat transfer coefficients decrease as jet-to-surface increases contrary to the case of the normal jet. As a result, much higher heat transfer coefficients are obtained with Joule-Thomson effect than those of the normal jet without J-T effect.

• Informatization Policy
• /
• v.20 no.4
• /
• pp.51-70
• /
• 2013

The flaming which is defined as posting deliberately hostile messages online has been perceived as one of the most dangerous behaviors on the Internet. Although the previous research on flaming focused on finding the effects of anonymity and individual differences, more comprehensive explanation is still needed. This research attempted to find social variables which affect the attitude toward and the act of flaming based on the differences between high school and college students. Findings show that both high school and college students are strongly influenced by their affiliated groups in the intention to commit online flaming and past experiences of the number of the acts of flaming. At the same time, vicarious learning was positively associated with high school students, but direct utterance was positively associated with college students. The implications of the study was also discussed.