• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.8
• /
• pp.75-81
• /
• 2008

Water treatment study employing plasma is thoroughly examined in the following paper. The research using water plasma torch showed superior results in terms of economical and energy efficiency due to the substantial reduction of electric power. A comparison of streamer and arc discharge phenomena taken place in water was put under close scrutiny. Dyeing wastewater exposed to the plasma treatment was sampled and analyzed for relative dissolved ozone concentration, hydrogen peroxide, as well as the color removal efficiency. It was found that streamer discharges is more effective than arc discharge in growth of $H_2O_2$ and $O_3$ by plasma chemical constituents, though plasma torch had small oxidation reagents selectivity. Thus, streamer discharges, due to the efficient plasma-chemical reactions environment, proved to be more efficient compare to the thermal arc plasma loading.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6282-6288
• /
• 2014

$CO_2$ welding is used widely in the field. On the other hand, welding defects occur when welders cannot adjust the current and voltage needed for welding and have to stop working to adjust the current and voltage, causing sudden cooling down of the welding structure inside a vehicle or tank where the control panel is invisible or when work site is far. This study used three types of existing $CO_2$ welders. This also applied SS400 rolled steel for welding structural purposes for remote control torch welding, perform a welding test through v-groove butt welding with a remote control torch and existing $CO_2$ welding torch, conducted visual inspection on the appearance of a welded top bead. In addition, the appearance quality of the welding part was monitored mainly through penetrant testing and a bending test to evaluate the welding defect reduction and the effect on the performance and compatibility by replacing the existing welder.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.92-92
• /
• 2010

전북대학교에서는 우리나라 최초로 0.4 및 2.4 MW 급 초음속 열플라즈마 시험 시설 구축사업을 진행하고 있으며, 이를 이용한 응용 분야 별 선행연구를 수행하고 있다. 구축 시험 시설의 핵심장치인 MW 급 대출력 초음속 열플라즈마 발생기로는 양극과 음극 사이에, 전기적으로 절연된 도넛 형태의 간극을 다수 삽입하여 아크 길이를 늘림으로써, 플라즈마 출력을 비례하여 높일 수 있는 Segmented 형 아크 직류 토치를 사용하고자 하며, 제작을 위해 설계 중인 토치는 0.4 및 2.4 MW 출력에 대해, 마하 2 이상의 초음속 유동에서 각각 13 및 20 MJ/kg 이상의 플라즈마 비엔탈피 구현을 목표로 하고 있다. 특히, 이와 같은 고엔탈피 초음속 유동의 달성은 0.4MW 급의 경우엔 공기유량 0.01 kg/s 이상에서, 2.4 MW 급의 경우엔 0.05 kg/s 이상에서 10Torr 이하의 진공과 투입된 MW 규모의 열량을 지속적으로 유지 및 제거할 수 있는 시설이 있어야 구현 가능하므로 이를 위한 건축과 지원시설 구축을 동시에 진행하고 있다. 본 발표에서는 0.4 MW 급 초음속 열플라즈마 시험 시설을 중심으로, 상기 MW 급 Segmented 형 아크 직류토치와 이를 구동하기 위한 대출력 초음속 열플라즈마 시험 시설에 대해 그 동안 전북대학교에서 진행되어 온 개념설계 내용을 소개하고자 한다. 덧붙여, 최근 본 사업단에서 선행 연구 중인 고엔탈피 초음속 열플라즈마 진단 계측 기법과 향후 응용분야 및 핵심 연구개발 과제 등에 대한 간략한 소개도 함께 하고자 한다.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.204-207
• /
• 2011

A particle counting system that can also provide sensitive, specific chemical information, while consuming very less power, occupying less space, and being inexpensive has been developed. This system uses a microwave plasma torch (MPT) as the excitation source for atomic emission spectrometry (AES). Emission from a single particle can be detected, and the wavelength at which the emission is observed indicates the elements present in the particle. It is believed that correlating the particle size and emission intensity will allow us to estimate the particle size in addition to abovementioned capabilities of the system. In the long term, this system can be made field-portable, so that it can be used in atmospheric aerosol monitoring applications, which require real-time detection and characterization of particles at low concentrations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1016-1021
• /
• 2013

While using the hydrogen mixture gas torch, the glass edge sealing and the shape of the edge sealing parts is affected by many parameters such as flow rate of gas, traveling speed of torch, distance between glass and torch. As the glass edge sealing shape have effects on the insulation and airtightness and strength of the glass panel; the sealing shapes are predicted according to the process parameters. The paper highlight the nonlinear regression equations of the cross-sectional shape of the sealing shape according to the parameters, that is experimentally predicted later compared and verified the equation with the experimental result.

• Journal of the Korean Vacuum Society
• /
• v.22 no.2
• /
• pp.66-78
• /
• 2013

In order to develop of 80 kW RF plasma torch system, we achieved three-dimensional simulations for the extraction of more information as temperature in torch and fluid behavior analysis, etc. The position of powder injection tube, the plasma discharge characteristics with various input current and various length of ceramic tube, and the plasma temperature characteristics with process gas flow rate such those was simulated. RF thermal plasma torch designed by simulation was manufactured that was measured to the maximum of 89.3 kW power. The mass production using developed 80 kW RF thermal plasma torch system were investigated by characteristics manufactured of Si nano powder. The mass-production level of Si nano-powder was average of 539 g/hr and high yield rate of 71.6%, respectively. The particle size distribution $D_{99}/D_{50}$ of manufacturing nano-powder was investigated to 1.98 as a good uniform.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.2
• /
• pp.169-178
• /
• 2016

The properties of wastes for melting need to be considered to minimize the maintenance of refractory and to discharge the molten slags smoothly from a plasma torch melter. When the nonflammable wastes from nuclear facilities such as concrete debris, glass, sand, etc., are melted, they become acid slags with low basicity since the chemical composition has much more acid oxides than basic oxides. A molten slag does not have good characteristics of discharge and is mainly responsible for the refractory erosion due to its low liquidity. In case of a stationary plasma torch melter with a slant tapping port on the wall, a fixed amount of molten slags remains inside of tapping hole as well as the melter inside after tapping out. Nonmetallic slags keep the temperature higher than melting point of metal because metallic slags located on the bottom of melter by specific gravity difference are simultaneously melted when dual mode plasma torch operates in transferred mode. In order to minimize the refractory erosion, the compatible refractories are selected considering the temperature inside the melter and the melting behavior of slags whether to contact or noncontact with molten slags. An acidic refractory shall not be installed in adjacent to a basic refractory for the resistibility against corrosion.

• Proceedings of the KWS Conference
• /
• 1995.10a
• /
• pp.54-57
• /
• 1995

• Proceedings of the KWS Conference
• /
• 1997.10a
• /
• pp.198-201
• /
• 1997

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.316-316
• /
• 1999