• 기계와재료
• /
• v.22 no.3
• /
• pp.22-29
• /
• 2010

자원의 고갈과 지구환경오염의 심각성을 인지하는 시각이 늘어남에 따라 산업계에서도 친환경적 기술에 대한 다양한 연구 개발이 이슈가 되고 있다. 정전기력 잉크젯 패터닝 기술 또한 그 예라 할 수 있겠는데, 이는 기존인쇄 기술의 시각적인 표현의 개념을 벗어나 패턴 자체의 기능을 부여함으로써 그 가치를 높이고, 현존하는 각종 미세 패터닝 기술의 다공정성과 환경에 미치는 영향 등의 문제점을 개선 할 수 있는 기술이라 할 수 있겠다. 정전기력 잉크젯 패터닝 기술은 이미 60~70년대부터 연구 개발 되어왔던 정전기력이 유체에 미치는 영향을 제어하여 극소량 미세 액적 토출 및 분무를 이끌어 내는 기술을 기반으로 토출되는 노즐 헤드의 직경 대비 극 미량의 기능성 잉크를 토출하고, 서브마이크론(submicron)급의 패턴 인쇄를 가능케 한다. 본 논문에서는 정전기력 잉크젯 패터닝 공정의 요소기술을 기반으로 프린팅 장비를 설계 및 제작하고, 미세 액적 토출을 위한 수마이크론의 직경을 갖는 노즐 헤드를 개발 및 프린팅 장비에 대응하여 통합 제어 프로그램을 이용한 기판상의 미세 패터닝 실험을 실시하였다. 정전기력 기반 미세 패터닝 실험의 공정 변수를 잉크의 특성, 노즐헤드의 특성, 기판의 특성, 장비의 특성으로 구분지어 공정 시스템의 성능을 검토 및 기능성 잉크의 미세 패터닝을 구현 하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.481-481
• /
• 2011

이 논문은 세라믹 노즐(내경: 20 um)을 제작하여 새로운 프린팅 방식인 정전기수력학방식을 이용하여 유리기판위에 직경 30 um의 ZnO seed dot를 패턴하였다. 정전기수력학은 기존의 프린팅 방식과 달리 전기장으로 유도된 노즐을 이용하여 액적을 토출시키는 새로운 프린팅 방법이다. 패턴된 ZnO seed는 열처리후 수열합성법을 이용하여 성장시켰다. 같은 방법으로 잉크젯 프린팅을 이용하여 ZnO seed 패턴 후 열처리하여 수열합성을 이용하여 성장시켰다. 잉크젯 프린팅 방식을 이용하여 성장된 ZnO nanowire는 위성 액적이 떨어져 ZnO seed dot 주변에 ZnO nanowire가 성장하였다. 반면, 정전기수력학 프린팅 방식을 이용하여 성장된 ZnO nanowires는 ZnO seed 패턴 중앙에 집중되어 ZnO nanowire가 성장하였다.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.320-322
• /
• 2010

저용량 에어컨의 압축기에 많이 사용되는 Single rotary 방식은 하나의 피스톤만을 채용하여 가격적인 면에서 큰 이점을 가진다. 그러나, 압축기 모터가 1회전할때 마다 압축과 토출을 단 1회 거치게 되므로, 부하변동을 심하여 진동이 많이 발생하는 단점이 있다. 이러한 단점을 보완하기 위하여 Single rotary를 사용하는 에어컨 제품에서는 저속에서의 운전을 회피하거나 하나의 운전점에 대한 전향보상기를 채용하여 진동을 저감시켜 왔다. 본 논문에서는 모든 운전점에서 보상이 가능하도록 압축과 토출로 인한 부하의 패턴에서 각 주파수 성분을 분석하여 자동으로 부하 토크를 보상하는 알고리즘을 제안한다. 제안된 방법은 가장 영향이 큰 1차와 2차 주파수 성분의 속도 리플의 양을 FFT 하고, 그 양이 작아지는 방향으로 부하 토크를 전향 제어방식으로 인가하는 방식이다. 제안된 방식을 이용하여 저속 운전에서 진동이 저감 되는것을 실험을 통하여 보였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.12
• /
• pp.1027-1034
• /
• 2014

The shear stress on a surface due to the thin film fluid flow is an important issue. In case of a rotating disk, the fluid is delivered to the edge of the disk by centrifugal force, which acts as a body force on the fluid. Wear of a surface is affected by the shear stress acting on the surface and curvature. In this study, we utilize computational fluid dynamics software to model the ratio of curvature and local shear stress on solid surfaces. The key goal of the study is to determine an optimized curvature for the thin film fluid flow on a solid surface in order to minimize the local shear stress affecting the wear of this surface. Our results on the effects of curvature will be utilized for the design of devices that utilize thin film fluid flow on a solid surface, such as rotating-disk spray systems and thin film coating.

• Economic and Environmental Geology
• /
• v.51 no.6
• /
• pp.567-577
• /
• 2018

One of problems related with water curtain cultivation (WCC) in Korea includes severe declination of groundwater levels during the peak season, and it is likely that the problem can be resolved efficiently when the connection characteristics between groundwater and stream are well understood. This study examined temperature, and oxygen/hydrogen stable isotopic compositions of the flowing groundwater to understand the connection between stream and ground water, and the influence of stream water on the nearby aquifer. This study was performed in Wangjeon-ri (Kwangseok-myon, Nonsan City), the well-known strawberry town using WCC technique. The sampling was done during February 2010 through June 2011 for both groundwaters and nearby streams. Temperature distribution pattern indicates that stream widely affected groundwater in the right part of WCC ara. In the left part, the influence of stream seems to occur narrowly near the stream. The similar phenomenon is reflected in the oxygen and hydrogen isotopic data.

• Clean Technology
• /
• v.22 no.4
• /
• pp.232-240
• /
• 2016

Recently, various research studies have been conducted and many are in progress for the suitable alternative materials for ITO based touch screen panel (TSP) due to limitations in size and flexibility. Various researches from all over the world have been attempted to fabricate the fine electrode less than $5{\mu}m$ for the rapid developing of display technology. Research is also being carried out in metal mesh methods using the existing technologies and alternative materials at commercial level. However, by using the existing technologies certain discrepancies are observed like low transparency and low yield which also results in the distortion of patterns. For repairing the damaged pattern, the conventional laser CVD technique has also been used but there are some challenges observed in CVD technique like achieving a stable fine electrode of $10{\mu}m$ or less and avoiding the formation of satellite drops. To overcome these issues, a new printing process named Electrohydrodynamic (EHD) printing, has been introduced by which $5{\mu}m$ fine patterns can be printed in one step. This EHDA printing technique has been applied to print very fine electrodes of $5{\mu}m$ or less by using conductive inks of various viscosities. This study also presents the optimized process parameters for printing $5{\mu}m$ fine electrode patterns during experiments by controlling the applied voltage and supply flow rate. The $5{\mu}m$ repair electrodes were fabricated for repairing $50{\mu}m$ shorted electrode samples.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.9
• /
• pp.873-877
• /
• 2013

The application of inkjet technology has been broadening from home printers to manufacturing tools. Recently, there have been demands for high-resolution printing, especially in the field of printed electronics applications. To improve upon the conventional inkjet printing patterning method, electrohydrodynamic (EHD) inkjet technology has recently attracted attention because droplets smaller than the nozzle diameter can be ejected and materials with wider viscosity range can be used for jetting. In this study, an EHD jet printing system for fine patterning is presented. To print various patterns based on drop on demand printing, vector and raster printing algorithm are implanted in the printing software. Fine conductive patterns with line width of less than $7{\mu}m$ can be easily achieved via EHD jet using a nozzle with inner diameter of $8{\mu}m$.

• Korean Journal of Food Science and Technology
• /
• v.47 no.1
• /
• pp.70-74
• /
• 2015

Inactivation of microorganisms in grains used for saengshik, a formulated health food, was attempted by corona discharge plasma jet (CDPJ). The initial microbial counts of the grains were in the range of $1.7{\times}10^3-9.9{\times}10^5CFU/g$. The CDPJ-inactivation effect was increased with electric current in the range of 1-1.5 A. Regarding span length between the tips of the electrodes and the treatment surface, the highest inactivation effect was observed at 25 mm. The inactivation pattern fitted well to the Singh-Heldman model. Bacteria were more labile to the CDPJ inactivation than yeasts and molds. Among tested grains, white rice showed the highest sterility followed by pressed barley and brown rice. Despite the inactivation by plasma, the thiobarbituric acid content of the grains remained unchanged over 10 min of treatment. Our results indicated the potential of the CDPJ treatment to improve the hygiene of saengshik products with no remarkable changes in lipid quality.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.375-382
• /
• 2019

In this study, an experimental study on the buildability of the structure using the developed printing materials and equipment was performed. Experimental variables included the moving speed of nozzles(=80 and 100mm/s), the revolutions per minute (RPM) of screw in discharge buckets, and the aspect ratio(=1.67 and 5.00) reflecting wall length of the structures. Buildability of the 3D printed concrete structures was analyzed based on the maximum decomposition layer and collapse patterns of the structures according to the experimental variables. The nozzle movement speed of 80mm/s and the aspect ratio of 1.67 were favorable for 3D printing in this study. The collapse process of structure due to uneven layer decomposition was also analyzed through the relative displacement measurement of the lower part of the structure during printing.