• Journal of the Korean Data and Information Science Society
• /
• v.28 no.5
• /
• pp.1145-1152
• /
• 2017

Environmental tests are used to verify an equipment that can withstand the rigors of harsh environments. In general, military products have lots of experiences with extreme environment compared to commercial products. Therefore, the military products used in mountains require a tailoring process about temperature drop for the environmental test. The International Organization for Standardization publishes that the coefficient of temperature drop is $-6.5^{\circ}C/1000m$ from all around the world. However, there is no the criteria in the South Korea. In this paper, we calculate the coefficient of temperature drop. Also, an equation used as a tailoring process for a low temperature test of the products has been suggested.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.444-449
• /
• 2001

The flow between two concentric cylinders, with the inner one rotating and with an imposed pressure-driven axial flow, is studied using numerical simulation. This study considers the identical flow geometry as in the experiments of Wereley and Lueptow[Phys. Fluid, 11 (12), 1999]. They carried out experiments using PIV to measure the velocity fields in a meridional plane of the annulus in detail. When an axial flow is imposed, the critical Taylor number is increased. The axial flow stabilizes the flow field and decreases the torque required to rotate the inner cylinder. The velocity vector fields obtained also show the same flow features found in the experiments of Wereley and Lueptow.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.5
• /
• pp.705-712
• /
• 2001

The flow between two concentric cylinders, with the inner one rotating and with an imposed pressure-driven axial flow, is studied using numerical simulation. The case without the axial flow was investigated in the preceding paper. This study considers the identical flow geometry as in the experiments of Wereley and Lueptow[Phys. Fluid, 11(12), 1999]. They carried out experiments using PIV to measure the velocity fields in a meridional plane of the annulus in detail. When an axial flow is imposed, the critical Taylor number is increased. The axial flow stabilizes the flow field and decreases the torque required to rotate the inner cylinder. The velocity vector fields obtained also show the same flow features found in the experiments of Wereley and Lueptow.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.5
• /
• pp.697-704
• /
• 2001

The flow between two concentric cylinders, with the inner one rotating, is studied using numerical simulation. This study considers the identical flow geometry as in the experiments of Wereley and Lueptow[J. Fluid Mech., 364, 1998]. They carried out experiment using PIV to measure the velocity fields in a meridional plane of the annulus in detail. When Taylor number increases over the critical one, the flow instability caused by curved streamlines of the tangential flow induces Taylor vortices in the flow direction. As Taylor number further increases over another critical one, the steady Taylor vortices become unsteady and non-axisymmetrically wavy. The velocity vector fields obtained also show the same flow features found in the experiments of Wereley and Lueptow.

• The KSFM Journal of Fluid Machinery
• /
• v.2 no.1 s.2
• /
• pp.103-107
• /
• 1999

Transient flow inside a hollow shaft of a Gas Turbine engine during sudden engine stop may result in non uniform heat transfer coefficients in the shaft due to flow instability similar to steady Taylor vortex, which may decrease the lifetime of the shaft. In the present study, transient Taylor vortex phenomena inside a suddenly stopped hollow shaft are studied analytically. Flow visualization is also performed to study the shape and onset time of Taylor Vortices for various initial rotational speed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.551-554
• /
• 2014

수시로 바뀌는 소프트웨어 프로세스 수립자의 지식과 경험에 의존하여 소프트웨어 프로세스 수립자가 좋아하는 임의의 방법으로 소프트웨어 프로세스를 정의하는 환경에서는 소프트웨어 프로세스의 품질을 높이는 데 한계가 있다. 그러므로 보다 효율적으로 프로세스 테일러링을 하는 기술이 필요하다. 본 논문에서는 소프트웨어 프로세스의 재사용을 가능하게 하는 프로세스 라인 구축 방법을 제안한다. 본 방안을 프로세스 테일러링에 적용하면 프로세스 재사용 기회를 높이고 프로세스 재적용 노력을 줄일 수 있다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.20 no.1
• /
• pp.37-44
• /
• 2017

Complexity of multiphase flows due to existence of more than two interface including free-surface in one system, cannot be simulated easily. Since more than two fluids affect to flows and disturb interface, non-linearities such as instabilities can be appeared. Among several instabilities on multiphase flows, one of representative is Rayleigh-taylor instability. In order to examine in importance of density disparity, several cases with numerous Atwood number are set. Moreover, investigation of influence on initial disturbance were also considered. Moving particle simulation (MPS) method, which was employed in this paper, was not widely used for multiphase problem. In this study, by adding new particle interaction models such as self-buoyance correction, surface tension, and boundary condition at interface models, MPS were developed having more strength of physics and robust. By applying newly developed multiphase MPS, considered cases are performed and compared each other. Additionally, though existence of disagreement of magnitude of rising velocity between theoretical values from linear potential theory and that of numerical simulation, agreement of tendency can be proved of similarity of result. the discordance of magnitude can be explained due to non-linear effects on numerical simulation which was not considered in theoretical result.

• Journal of the Korean Vacuum Society
• /
• v.3 no.2
• /
• pp.158-165
• /
• 1994

액체금속 이온 소오스의 모양에 대한 개선된 원추 모델을 제시하였다. 이 모델에서는 전도성 유 체의 테일러 원추를 0차 모양으로 하고 원추에서 벗어난 변형을 전자유체 역학적으로 취급하였다. 외부 의 전기적 스트레스 때문에 원추정점에서 일어나는 돌출을 오직 ra인 영역에서는 변형 이 없다는 것으로 정의되는 값이다. 이 가정에 의하여 각변형ζ는 다음같은 형태를 가졌다: r$\varepsilon$(t)이고 r>adlsrudn는 ζ=(a/r)$\varepsilon$이다. 여기서 지수 s는 변형의 모양을 나타내는 값이다. 이것을 모양방정식에 대입하여 계산한 결과 모양의 불안정되는 전위값은 Vc(r, h)=V0(h) V1은 1차의 표 면이 불안정되는 전위값으로 이온방출을 일어나는데 필요한 여분 값이다. 이렇게 얻어진 이온방출의 임 계전위 Vc는 실험치와 부합되는 값이었다. 더욱 중요한 것은 위의 Vc 형태가 국지불안정을 설명하여 주었다. 또한 외부에서 걸어준 전위가 임계전위값을 넘을 때 각변형 ζ>0이고 )

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.127-133
• /
• 2007

This paper represents the numerical study on Taylor flow according to the radius ratio and the angular velocity for flow between tow cylinder. The numerical model is consisted of two cylinder which inner cylinder is rotating and outer cylinder is fix, and the axial direction is used the cyclic condition because of the length for axial direction is assumed infinite. The diameter of inner cylinder is assumed 86.8 mm, the numerical parameters are angular velocity and radius ratio. The numerical method is compared with the experimental results by Wereley, and the results are very good agreement. The critical Taylor number is calculated by theoretical and numerical analysis, and the results is showed the difference about ${\pm}10\;%$. As $Re/Re_c$ is increased, Taylor vortex is changed to wavy vortex, and then the wave number for azimuthal direction is increased. Azimuthal wave according to the radius ratio is showed high amplitude and low frequence in case of small radius ratio, and is showed low amplitude and high frequence in case of large radius ratio.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.4
• /
• pp.93-102
• /
• 2008

Fingerprint sensor interoperability refers to the ability of a system to compensate for the variability introduced in the finger data of individual due to the deployment of different sensors. The purpose of this paper is the development of a compensation algorithm by which the interoperability of fingerprint recognition can be improved among various different fingerprint sensors. In this paper we show that a simple transformation derived to form a Taylor series expansion can be used in conjunction with a set of corresponding minutia points to improve the correspondence of finer fingerprint details within a fingerprint image. This is demonstrated by an applying the transformation to a database of fingerprint images and examining the minutiae match scores with and without the transformation. The EER of the proposed method was improved by average 60.94% better than before compensation.