• Magazine of korean Tunnelling and Underground Space Association
• /
• v.8 no.2
• /
• pp.38-52
• /
• 2006

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.2
• /
• pp.101-111
• /
• 2002

The purpose of this research is to develop improved model for joints of tunnel based on Disturbed State Concept (DSC) model. DSC model is verified with respect to comprehensive laboratory tests performed by Schneider and back prediction results. Based on results of this research, it can be stated that DSC model is capable of characterizing the strain softening and dilative behavior of rough granite joints under four different constant normal stresses.

• Geophysics and Geophysical Exploration
• /
• v.6 no.1
• /
• pp.13-22
• /
• 2003

TSP (Tunnel Seismic Profiling) survey is a technique for imaging and characterizing geological structures ahead of a tunnel face. The seismic modeling algorithm and the synthetic data could be helpful for TSP surveys. However, there is few algorithm to describe the propagation of the elastic waves around the tunnel. In this study, existing 2-dimensional seismic modeling algorithm using finite element method was modified to make a suitable algorithm for TSP modeling. Using this algorithm, TSP modeling was practiced in some models. And the synthetic data was analyzed to examine the propagation characteristics of the elastic waves. First of all, the modeling for the homogeneous tunnel model was practiced to examine the propagation characteristics of the direct waves in the vicinity of the tunnel. And the algorithm was applied to some models having reflector which is perpendicular or parallel to the excavation direction. From these, the propagation characteristics of the reflected waves were examined. Furthermore, two source-receiver arrays were used in respective models to investigate the properties of the two arrays. These modeling algorithm and synthetic data could be helpful in interpreting TSP survey data, developing inversion algorithm and designing new source-receiver arrays.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.1
• /
• pp.19-37
• /
• 2024

Rockbolts are the primary-supports in NATM tunnels and are widely used at tunnel construction sites. Among the rockbolts methods applied in domestic tunnel design, fully grouted rockbolts are the most representative and frequently used. Fully grouted rockbolts exhibit relative behavior between the bolt and the ground due to the grout material. However, during numerical analysis for tunnel design, fully grouted rockbolts are often modeled in a way that does not reflect their behavior characteristics. This may result in underestimating or overestimating the force of the supports. Based on a literature review, it was analyzed that fully grouted rockbolts are modeled using truss element or cable element. To analyze the effect of grout properties of cable elements on rockbolts behavior, this paper compared the behavior of rockbolts in two models: one estimating grout properties based on rockbolt pull-out test data, and another assuming complete adhesion between the rockbolts and the ground by applying large grout properties. Under identical tunnel conditions, the numerical analysis was conducted by modeling the fully grouted rockbolts differently using truss and cable elements, and the tunnel behavior was analyzed. The research results suggest that modeling fully grouted rockbolts as a function of the interface effect between the bolts and the ground, specifically considering grout, is desirable. The use of pull-out test data to simulate the behavior of actual fully grouted rockbolts was considered as a valid approach.

• The Journal of Engineering Geology
• /
• v.14 no.2
• /
• pp.223-233
• /
• 2004

When the groundwater outflow occurs due to tunnel excavation during the road and railroad construction, depletion of groundwater resources, deficiency in the living and agricultural waters, and changes in the surface water flux are expected. The MODFLOW is a most commonly used and three dimensional finite difference model to predict changes in the groundwater system due to the tunnel construction. A conceptual model is one of the most important elements for the proper modeling results. Essential information will not be extracted from an oversimplified conceptual model while excess time and resources with much field data are required for the very complicated one. This study presented a comparison of the modeling results depending on some conceptual models and discussed construction of the efficient conceptual model for reasonable and realistic results in the tunnel modeling.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.431-440
• /
• 2003

A modeling was performed to predict the groundwater recovery in the vicinity of the waterway tunnel area using a groundwater flow model MODFLOW. The model was calibrated to reproduce measured groundwater levels and observed flow rates into the tunnel prior to lining, and then used for flow simulation under transient condition. Model predictions under steady-state condition revealed that if tunnel conductance had been reduced by 25% to 90%, groundwater levels would recover between 8% and 72.4% of their initial levels and flow into the tunnel will decrease between 5.5% and 82.7%. In case of 75% tunnel condutance ruduction in transient simulation. most of wells were predicted to recover within 20 years or so. The complete recovery for the wells with the groundwater level over 70 m was found to be impossible. For the 90% tunnel conductance reduction, all wells were found to be recovered within 15 years.

• Tunnel and Underground Space
• /
• v.27 no.4
• /
• pp.185-194
• /
• 2017

This technical paper is a study on the unique displacements of Shotcrete Lining at the mined tunnel during excavation period through deep consideration with real time data from monitoring instrumentations correlation with the numerical analysis to identify the rock stresses and the rock spring points at the working face of the Conventional tunnelling by the Drill and Blast, based on the geological face mapping results of the project NS2, Transmission cable tunnel project in Singapore. The created geometry of numerical model was prepared to the real mined tunnel construction site including, vertical shaft, construction adit, tunnel junction area, and 2 enlargement caverns. The convergence measurements by the monitoring instrumentation were performed during the tunnel excavation and shaft sinking construction stages to guarantee the safety of complicated underground structures.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.1
• /
• pp.91-104
• /
• 2008

In tunnels, safety factor concept has been suggested to estimate their stability quantitatively. It is merely limited in the framework of mechanical analysis. However safety factor concept has not been applied in hydro-mechanical coupled analyses due to their modelling complexity. Recently studies on this topic are being actively made. In this study, induced drainage modelling methods for hydro-mechanical coupled analyses are compared and analyzed to estimate safety factor of a subsea tunnel exactly. To this end, methods both controlling hydraulic characteristic of shotcrete and using a drainage well are considered. Sensitivity analysis were carried out on rock class, thickness of shotcrete, and hydraulic properties of rock mass. As the results of this study, it turned out that the induced drainage modelling using a drainage well would give more reliable results than that of controlling hydraulic characteristic of shotcrete in estimating tunnel stability in hydro-mechanical coupled analyses.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.466-466
• /
• 2017

지하공간의 개발과 지하공간의 굴착으로 인한 지표수 및 지하수 시스템의 변화나 굴착면 주위의 지하수 유동 체계의 변화는 터널내로의 지하수 유입, 지표수 고갈을 가져온다. 또한 터널 상부의 지반에서 현지응력의 변화로 인한 지하수 유출은 지표침하, 하천수 및 계곡수 고갈을 발생시킬 수 있다. 그러나, 터널설계 시 비용 및 시간, 현장의 진입조건 등의 제약으로 상세한 지반조사의 실시가 이루어지지 않을 때가 있다. 또한, 터널 공사가 진행되는 중에는 공사기간과 공사비 때문에 별도의 지반조사를 하지 않는다. 그 대신에 터널 막장에서 실시하는 Face Mapping을 토대로 공사를 진행하며, 대규모 위험요소가 발견되지 않는 이상 별도의 비용과 시간을 투입하여 추가 지질 및 지반 조사를 실시하는 경우는 매우 드물다. 연구지역의 지질은 경상분지내 백악기 하양층군의 퇴적암류, 이를 관입/분출한 불국사화강암류 및 제3기 화산암류, 전기 에오세 연일층군에 대비되는 퇴적암류로 구성되어 있다. 이들을 피복하는 제4기 충적 퇴적층은 주로 단층곡과 동측 지괴의 선상지 및 하천을 따라 분포한다. 연구지역에는 폭 100 m 이상의 대규모 단층대가 발달하였으며 제4기 단층운동으로 인한 단층파쇄대가 존재한다. 퇴적암 분포지역에서는 반복층서가 관찰되며 소규모 단층, 단열, 변형띠 등이 연속적으로 발달해 있다. 본 연구에서는 터널공사에 의한 지하수 변화를 확인하기 위하여 현장추적자 시험과 수질분석 및 지하수 모델링을 실시하였다. 현장 수질 분석에 의한 지표수와 지하수 간의 수질의 차이를 보면, 알칼리도를 제외한 대부분의 수질 항목이 서로 유사성을 보인다. 전기전도도(EC), TDS, 알칼리도의 경우 지표수의 수원지에서 터널 내부로 유입이 일어나고 있다. 이는 터널 공사의 영향으로 판단되며, 현장에서 실시한 추적자 시험에서는 추적자의 이동 시간이 매우 빨라 지표 수원지로부터 지표수가 터널내부로 빠른 속도(10시간 이내)로 유입된다고 판단된다. 지하수 모델링 결과, 정상류 상태에서는 지하수가 북동쪽의 높은 고도에서 서남쪽의 낮은 고도로 흐르는 것으로 확인되며, 가뭄시에도 지하수 함양으로 지하수가 고갈되지는 않는 것으로 나타났다. 부정류 상태 모델링 결과, 일일 평균 $32.49m^3$의 지하수가 터널 내부로 유입되는 것으로 산정되었다. 이 양은 터널 내부뿐만 아니라 터널 공사 현장 주위로도 지하수 유출이 일어나고 있음을 지시한다.

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.8 no.4
• /
• pp.108-117
• /
• 2006