• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.293-301
• /
• 2005

In case of the roads that pass the mountain area, the cut sections or the tunnels are constructed. And In winter season it appears sunshine few in the specific segment, the shade is continued last and the freezing sections occur. So, the attention is necessary in traffic safety. This study was to evaluate the influence of sunshine and surface freezing sections expected in route plans of roads using GIS and makes alternative ideas in road stability security. After selecting 29 km sections of Donghae highway and creating a 3 dimensional terrain surface through the digital conversion of design plan data, it reflects the road alignment data of the same coordinates and a 3 dimensional road modeling is created. It set shadow time of road surface for the solar trace in the winter solstice in 20 minute interval. Shade areas are displayed and inputed in polygon data by manual vertorizing. Graphic and attribute data of this shade section is constructed in geodatabase of ArcCatalog. And it extracted the freezing section using intersect fuction of the GIS spatial analysis. By analyzing the winter meteorological data of temperature, rainfall, snowfall, humidity, and etc. and grasping dangerous freezing section of the road surface effectively, it will be able to make alternative ideas of the preliminary stability evaluation reflected in basic design.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.109-115
• /
• 2014

The aim of the study is to present a method to build an octree and to query from it for huge 3D point clouds of which volumes correspond or surpass the main memory, based on the memory-efficient octree developed by Han(2013). To the end, the method directly refers to 3D point cloud stored in a file on a hard disk drive instead of referring to that duplicated in the main memory. In addition, the method can save time to rebuild octree by storing and restoring it from a file. The memory-referring method and the present file-referring one are analyzed using a dataset composed of 18 million points surveyed in a tunnel. In results, the memory-referring method enormously exceeded the speed of the file-referring one when generating octree and querying points. Meanwhile, it is remarkable that a still bigger dataset composed of over 300 million points could be queried by the file-referring method, which would not be possible by the memory-referring one, though an optimal octree destination level could not be reached. Furthermore, the octree rebuilding method proved itself to be very efficient by diminishing the restoration time to about 3% of the generation time.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.3
• /
• pp.187-201
• /
• 2021

Recently, the demand for a 3D urban spatial information infrastructure for storing, operating, and analyzing a large number of digital data produced in cities is increasing. CityGML is a 3D spatial information data standard of OGC (Open Geospatial Consortium), which has strengths in the exchange and attribute expression of city data. Cases of constructing 3D urban spatial data in CityGML format has emerged on several cities such as Singapore and New York. However, the current ecosystem for the creation and editing of CityGML data is limited in constructing CityGML data on a large scale because of lack of completeness compared to commercial programs used to construct 3D data such as sketchup or 3d max. Therefore, in this study, a method of constructing CityGML data is proposed using commercial 3D mesh data and 2D polygons that are rapidly and automatically produced through aerial LiDAR (Light Detection and Ranging) or RGB (Red Green Blue) cameras. During the data construction process, the original 3D mesh data was geometrically transformed so that each object could be expressed in various CityGML LoD (Levels of Detail), and attribute information extracted from the 2D spatial information data was used as a supplement to increase the utilization as spatial information. The 3D city features produced in this study are CityGML building, bridge, cityFurniture, road, and tunnel. Data conversion for each feature and property construction method were presented, and visualization and validation were conducted.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.1
• /
• pp.49-54
• /
• 2023

The Global Positioning System (GPS) was developed for military purposes and developed as it is today by opening civilian signals (GPS L1 frequency C/A signals). The current satellite orbits the earth about twice a day to measure the position, and receives more than 3 satellite signals (initially, 4 to calculate even the time error). The three-dimensional position of the ground receiver is determined using the data from the radio wave departure time to the radio wave Time of Arrival(TOA) of the received satellite signal through trilateration. In the case of navigation using GPS in recent years, a location error of 5 to 10 m usually occurs, and quite a lot of areas, such as apartments, indoors, tunnels, factory areas, and mountainous areas, exist as blind spots or neutralized areas outside the error range of GPS. Therefore, in order to acquire one's own location information in an area where GPS satellite signal reception is impossible, another method should be proposed. In this study, IMU(Inertial Measurement Unit) combined with an acceleration and gyro sensor and a geomagnetic sensor were used to design a system to enable location recognition even in terrain where GPS signal reception is impossible. A method to track the current position by calculating the instantaneous velocity value using a 9-DOF IMU and a geomagnetic sensor was studied, and its feasibility was verified through production and experimentation.

• Tunnel and Underground Space
• /
• v.17 no.5
• /
• pp.360-371
• /
• 2007

This paper presents an application of drainage control and slope stability by GIS-based hydrological modeling to control the surface water from an operational point of view. This study was carried out on a region of Pasir open-pit coal mine, Indonesia. A detailed topographical survey was performed at the study area to generate a reliable DEM (Digital Elevation Model). Hydrology tools implemented in ArcGIS 9.1 were used to extract the characteristics of drainage system such as flow direction, flow accumulation and catchment area from DEM. The results of hydrological modeling and spatial analysis showed that current arrangement of pumping facility is not suitable and some vulnerable places to erosion exist on the bench face due to concentrated surface runoff. Finally, some practical measures were suggested to optimize the design of drainage system and to monitor the slope stability by the surface water management at the study region during heavy rainfall.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2195-2202
• /
• 2011

Recently, navigation system is used to inform users of vehicle location and driving direction, moving distance and so on. This navigation uses GPS sensor for current location determination. The GPS sensor will determinate current coordinates by using triangulation algorithm. This characteristic bring about that the GPS signal is not available in the shadow region such as tunnel and urban canyon. Moreover, Even though the signal is available, inherent positional error rate of the GPS often results in the dislocation of vehicle. To solve, these problems, a new positioning system is proposed in the paper. The System utilizes geomagnetic sensors of smartphone, speed information of CAN of vehicle though bluetooth and WiFi APs for GPS shadow area. The experimental test shadows that the proposed system using multiple data is able to determine the position of vehicle in GPS shadow areas.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.145-154
• /
• 2018

The damage investigation and inspection methods performed in concrete facilities such as bridges, tunnels, retaining walls and so on, are usually visually examined by the inspector using the surveying tool in the field. These methods highly depend on the subjectivity of the inspector, which may reduce the objectivity and reliability of the record. Therefore, the new image processing techniques are necessary in order to automatically detect the cracks and objectively analyze the characteristics of cracks. In this study, deep learning and image processing technique were developed to detect cracks and analyze characteristics in images for concrete facilities. Two-stage image processing pipeline was proposed to obtain crack segmentation and its characteristics. The performance of the method was tested using various crack images with a label and the results showed over 90% of accuracy on crack classification and segmentation. Finally, the crack characteristics (length and thickness) of the crack image pictured from the field were analyzed, and the performance of the developed technique was verified by comparing the actual measured values and errors.

• Tunnel and Underground Space
• /
• v.13 no.6
• /
• pp.486-494
• /
• 2003

When the orientations of joints are measured on a rock exposure, there are frequent cases that are difficult to approach by the surveyor to the target joints or to set up scanlines on the slope. In this study, to complement such limit and weak points, a new algorithm was developed to interpret joint orientation from analyzing the images of rock slope. As a method of arranging the multiple images of a rock slope, the multistage convergent photographing system was introduced to overcome the limitation of photographing direction which existing method such as parallel stereophotogrammetric system has and to cover the range of image measurement, which is the overlapping area between the image pair, to a maximum extent. To determine camera parameters in the perspective projection equation that are the main elements of the analysis method, a new method was developed introducing three ground control points and single ground guide point. This method could be considered to be very simple compared with other existing methods using a number of ground control points and complicated analysis process. So the global coordinates of a specific point on a rock slope could be analyzed with this new method. The orientation of a joint could be calculated using the normal vector of the joint surface which can be derived from the global coordinates of several points on the joint surface analyzed from the images.