• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.3
• /
• pp.418-424
• /
• 2015

The content of ${\beta}$-carotene in agricultural foods, such as seasonings, tea, vegetables, cereals, nuts & seeds, oils & fats, and fruits, were quantitatively analyzed using reversed-phase HPLC with an UV/visible detector. Standard reference material (SRM) 2385 was used as a control material to validate measurement of ${\beta}$-carotene in this study. Recovery percentage and relative standard deviation of ${\beta}$-carotene in SRM 2385 were 102% and 1.73%, respectively. Vegetables and tea contained relatively high concentrations of ${\beta}$-carotene (young barley powder, $17,293.95{\mu}g/100g$; raw young barley, $2,755.15{\mu}g/100g$; dried green tea leaves, $13,671.85{\mu}g/100g$; green tea powder, $7,579.04{\mu}g/100g$). Contents of ${\beta}$-carotene in nuts & seeds as well as oils & fats ranged from $11.32{\mu}g/100g$ in almond products (roasted with salt) to $58.56{\mu}g/100g$ in perilla seed oil. Among 20 fruits, a high content of ${\beta}$-carotene was found in apricots (raw), which contained $2,280.35{\mu}g/100g$.

• Journal of Oral Medicine and Pain
• /
• v.33 no.1
• /
• pp.41-48
• /
• 2008

The focus of this study is to analyze the effect of stress on the health of bruxism patients using the MBTI system. The most common personality type will be identified among the bruxism patients and by understanding their personality & their handling of stress, more comprehesive and effective treatment plan can be constructed. The study will also conclude that the type of personality has big effect on the cause of bruxism, and that this will be considered in the treatment plan in this hospital. The result of the study is as follow. First, more bruxism patients were type I than type E. It can be suggested that this result is due to the introversive people maintaining their energy how within themselves, and private are less to likely to release there stress than the expressive people. Second, among the bruxism patients significantly more type T were found compared to type F. This implies the bruxism tend to follow principals, scientific and analysing during decision making rather than basing their decision an meanings, emotions and influences. Thirdly, more bruxism patients clarified into ST in comparison to non-bruxism patients. This is thought to be due to probable increased stress and anxiety following ST people's tendency to more strict and realistic thinking according to effectiveness, evidence-based and productivity. Fourth, the type IJ was the most of the bruxism patients. We can come to the conclusion that decision-oriented introversion people who have hard to change, a thoroughgoing preparation characters are likely to grind their teeth by their detailed characters. Fifth, the type IT was the most of the bruxism patients. Bruxism patients are usually influenced by spirit, easily hearted, awed of relationship and attention. So, their intensity of stress is much bigger because of their personality. The last, Type IS was the most of the bruxism patients. It means that introvert sensitive types who have characters of calm, passive but defence to other's emotion, also neutral, keep moderation, and have cold-heartedness are likely to grind their teeth frequently. In conclusion it is evident that bruxism patients have particular personality types. Precisive, analysing and introversive bruxism patients are expected to have higher sensitivities to stress.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.1-11
• /
• 2009

Statement of problem: There are two methods of color choice for the esthetic restoration. One is visual shade matching which draws a comparison between shade guide and teeth in dentist's own eye and the other is using a digital shade analysis system recently introduced. Although the visual shade matching has a lot of problems, decision of color by this visual shade matching and the ways of expression for the decided color are still applicable to clinical dentistry. Purpose: This study is designed to investigate shade guides used in the dental clinics and laboratories have the same value using ShadeEye-$NCC^{(R)}$ dental chroma meter (Shofu Inc., Kyoto, Japan) using shade guide are evaluated. Material and methods: At the first experiment, eight Vita Lumin Vacuum shade guides (Vident Inc., California, USA) were collected from the dental clinics. A1 and B1 shade tabs are chosen and the colors are analyzed five times each in both tooth and porcelain modes by digital shade analysis system, ShadeEye-$NCC^{(R)}$. In the second experiment, twelve Vita shade guides using practically in the dental clinics and laboratories were collected and also A1 and B1 shade tabs are chosen and the colors of A1 and B1 are analyzed one time each in both tooth and porcelain modes by ShadeEye-$NCC^{(R)}$. Results and conclusion: There were significant differences among eight shade guides in terms of shade (chroma), value and hue in both of A1 and B1 (P<.05). Shade guides using in present both dental clinics and laboratories did not show significant differences, except A1 in the porcelain mode, it showed significant differences (P<.05) in the shade even though the shade tab has the same name.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.527-533
• /
• 2004

One clinical technique recommended for improving marginal integrity is "rebonding" or application of unfilled resins to the surface of composite restoration. But continuously the restorations are affected with occlusal load. There is room for doubt that the rebonding agent has the positive effect on microleakage in spite of the stress generated by the occlusal load. This study determined the effect of rebonding on microleakage of Class V resin composite restorations under load cycling. Class V cavities were prepared on the buccal surface of 40 sound extracted premolars and restored with a hybrid light-cured resin composite according to manufacturers' directions. They were randomly divided into two groups consisting of 20 samples: a control(group I), without surface sealing, and the other group(group II) in which margins were etched and rebonded. After thermocycling, each of groups was divided into subgroups(group A, B), and load cycling(total 100,000 cycles with 4-100N load at a rate of 1 Hz) were applied on the group B. Assessment of microleakage utilized methylene blue dye penetration. The following results were obtained: 1. In the occlusal region, no significant difference was noted in the scores regardless of whether or not the rebonding agent was used(group TA-IIA, IB-IIB)(p>0.05). 2. In the cervical region, the control group with rebonding(group IIA) showed the better result than the group without rebonding(group IA)(p<0.05). 3. In the cervical region, the rebonded group with load cycling(group IIB) showed similar results to the group without rebonding(group IB) and no significant difference was noted(p>0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.474-480
• /
• 2004

The purpose of this in vitro study was to compare the remineralizing effects of three glass ionomer cements (high filled glass ionomer cement, compomer, resin modified glass ionomer cement) with resin composite (control group) on incipient interproximal caries, and to assess long-term change of remineralization effect, in each material, evaluated by microtomography. Proximal restoration was simulated with tooth specimen and Glass Ionomer Cements. And each of these groups was placed into a closed container with artificial saliva at $37^{\circ}C$ and pH 7.0 for a time period of thirty days with constant circulation. At the end of thirty and sixty days, tomographic images were taken from these specimens with micro CT scanner. Materials used in this study were as follows. Group 1: Fuji IX GP (GC Corp., Tokyo, Japan) Group 2: Vitremer (3M ESPE, St. Paul, Minn., USA) Group 3: F2000 (3M ESPE, St. Paul, Minn., USA) Group 4: Z250 (3M ESPE, St. Paul, Minn., USA) Using density-measuring program, the micro-density of carious lesions on the specimens were measured. The mean density changes of each group were compared to the other groups to evaluate the effect of remineralization. The results were as follows: 1. The lesion density of all groups increased. 2. The mean density increase of Group 1, 2, 3 were higher than that of Group 4 every month(p<0.05). 3. There were significant differences of density increase among glass ionomer group(Group 1, 2, 3).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.2
• /
• pp.222-233
• /
• 2007

One of the most important and basic test of dental restorative materials is the evaluation of microleakage into the tooth-restorative interface. There are many techniques to test microleakage, but most of them have several disadvantages. Recently developed microtomography(micro-CT) can provide the three dimensional image and information about the internal component in non-destructive way, therefore using micro-CT, it is possible to evaluate microleakage exactly in quantitative manner. The purpose of this study is to find a new method for quantitative and non-destructive evaluation of microleakage in composite resin restorations using micro-CT and to compare the new method with conventional dye penetration method. Thus, microleakages of two kinds of dentin bonding systems were evaluated with above two methods. 40 extracted sound human premolars were randomly divided into two groups consisting of 20 samples and restored accordingly. Group 1 : Class V resin restorations with $Adper^{TM}$ Singe Bond Group, 2 : Class V resin restorations with $Adper^{TM}\;Promp^{TM}$ L-pop. The $Filtek^{TM}$ Supreme was applied to the Class V cavities of all teeth. After that, 10 teeth from each group were applied to evaluation of microleakage using micro-CT, and other 10 teeth from each group were using conventional dye penetration method. The conclusions of this study were as follow : 1 Using micro-CT, Group 1 showed significantly less microleakage than Group 2 and there was statistically significant difference(p<0.01) between two groups. 2. Using conventional dye penetration method, Group 1 leaked less than Group 2 and there was statistically significant difference(p<0.01) between two groups 3. The difference between two groups is more evident in the method using micro-CT. 4. In all two methods, microleakage appeared more into the cavities to dentinal margins than enamel margins.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.2
• /
• pp.204-214
• /
• 2007

The aim of this study was to investigate whether differences in surface treatment prior to repair influenced the seal of a resin fissure sealant placed on the occlusal surfaces of permanent molar teeth. One hundred and twenty extracted human molars were selected and a light curing sealant was placed on their occlusal surface following cleaning by prophylaxis and acid etching. The teeth were deliberately damaged, and then stored in artificial saliva for four weeks. Sixty teeth with the desired morphology of sealant failure were randomly divided into four groups where one group was treated with only etching agent, another by only air-abrasion, another by applying an etching agent followed by a bonding agent, and the last by air-abrasion followed by a bonding agent each. After sealant application, the samples were thermocycled and the degree of microleakage was determined. The results were as follows : 1. In the sealant/sealant interface group 2(0.22), 4(0.23) using air-abrasion showed a significantly lower microleakage score than group 1(0.38), 3(0.35) using an etching agent(p<0.05). There were no statistically significant differences(p>0.05) between groups 1, 2 and groups 3, 4. 2. In the sealant/tooth interface, group 3(0.20), 4(0.20) which used a bonding agent showed a significantly lower microleakage score than group 1(0.35), 2(0.40) (p<0.05). There were no statistically significant differences(p>0.05) between groups 1, 3 and groups 2, 4. 3. In SEM examination, while sealant surfaces treated with etching did not result in highly rough surfaces, those treated with air-abrasion did show rough surfaces.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.3
• /
• pp.244-249
• /
• 2011

This in vitro study compared the remineralization of incipient interproximal caries in the presence of three glass ionomer cements(highly-filled glass ionomer cement, resin-modified glass ionomer cement, compomer) and a resin composite(control). Thirty-two extracted premolars were selected based upon the lack of any visible demineralization. The teeth were coated in a transparent acid resistant nail varnish leaving $3{\times}3$ mm square. The teeth were subjected to the demineralizing buffer for 3 days and quantitative light-induced fluorescence(QLF) images of the subjects were taken. Proximal restoration was simulated by placing tooth specimens and the various glass ionomer cements in closed containers with artificial saliva at $37^{\circ}C$ and pH 7.0 with constant circulation. Further QLF images were subsequently taken at 30, 60, and 90 days. The changes of mineral loss(${\Delta}Q$) were evaluated by QLF and the change of ${\Delta}Q$(${\Delta}{\Delta}Q$) were compared between groups in order to evaluate the effects of remineralization. All data were analyzed using ANOVA and the post-HOC Dunnett C multiple comparison test at p<0.05. While ${\Delta}Q$(changes of mineral loss) increased for all treatments, the increases for three glass ionomer groups were significantly higher than that for the resin group at first month period. As time went on, the amount of ${\Delta}{\Delta}Q$ decreased.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.47-56
• /
• 2008

Risperidone is a widely prescribed atypical antipsychotic agent. Approved by the FDA as the first drug to treat irritability associated with autism in children, it is also used to treat tic disorder and Tourette's syndrome. Its adverse reactions related to dentistry include dry mouth, the mechanism of which is yet to be identified. The aim of this study is to identify, at the cellular level, how and to what extent risperidone affects intracellular free calcium concentration ($[Ca^{2+}]_i$), an primary intracellular factor in the regulation of fluid secretion in salivary gland cells. The human salivary gland cell line (HSG) was grown in MEM supplemented with 10% BCS. In order to measure $[Ca^{2+}]_i$, Fura-2/AM was loaded in the HSG, and fluorescence at 340 nm/380 nm excitation was measured in the 500 nm emission ratio. After every experiment, a calibration experiment was conducted in order to readjust the ratio to the actual $[Ca^{2+}]_i$. Changes in $[Ca^{2+}]_i$ were measured in the presence of carbachol, ATP and histamine. The researcher then explored how the pretreatment of risperidone affected such changes. Findings of this study include: 1. In HSG, $[Ca^{2+}]_i$ increased due to the addition of carbachol, ATP and histamine. The presence of risperidone inhibited the action of histamine on this process, while making little effect on that of carbachol and ATP. 2. A quantification of $[Ca^{2+}]_i$ in relation to histamine of different concentrations indicates that the effect of histamine was concentration dependent with an $EC_{50}$ of $3.3{\pm}0.5\;{\mu}M$. 3. The inhibitory effect of risperidone on histamine-induced $[Ca^{2+}]_i$ was concentration-dependent with an $IC_{50}$ of $104.4{\pm}14\;nM$. 4. Risperidone inhibits histamine-induced Ca2+ release from endoplasmic reticulum and influx of extracellular $Ca^{2+}$ in HSG cells(p<0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.1
• /
• pp.53-61
• /
• 2020

Midazolam is a short-acting benzodiazepine that is widely used in pediatric dental sedation. However, its clinical effectiveness as an intravenous sedative agent in children has not been widely documented. A retrospective study was conducted to evaluate the efficacy and safety of intravenous midazolam and nitrous oxide inhalation sedation in pediatric dental treatment. The subjects were 115 patients (118 cases) who received dental treatment under intravenous midazolam and nitrous oxide inhalation sedation. Demographic factors, general health status, sedation time, midazolam and nitrous oxide dosage, and success rate of sedation were evaluated from electronic medical records. Behavioral management was the main reason of choosing sedation. Mean duration of sedation was 56.7 minutes for surgical treatment, and 74.4 minutes for restorative treatment. The initial dosage of intravenous midazolam was 0.051 ± 0.019 mg/kg. In 34 cases (28.8%), additional midazolam of 0.036 ± 0.057 mg/kg was delivered during the treatment. The concentration of nitrous oxide was maintained between 40% and 50%. The success rate of sedation was 99% (n = 117). In 1 case, laryngospasm occurred and the patient was reversed with benzodiazepine antagonist, flumazenil. Intravenous midazolam sedation with nitrous oxide was shown to be clinically effective for the dental treatment in children, if administered by trained personnel and patients are carefully selected in accordance with guidelines.