• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.359-361
• /
• 2003

본 연구에서는 태양광 발전 시스템용 밀폐형 연축전지(VRLA Valve Regulated Lead Acid battery)의 특성을 고려한 최적 정전압 충전 기법을 적용하여 축전지 과충전 현상 및 부적절한 충전에 의한 조기 수명 저하의 요인을 해결할 수 있는 방안을 모색함으로써, 태양광 발전 시스템의 활성화 및 Lift-Cycle 단가를 감소시킬 수 있는 기초 자료로 활용하고자 한다. 또한 원격 감시 시스템을 통한 시스템의 운용 상태 결과를 정확하게 실시간 수집 분석하여 대체에너지용 밀폐형 축전지 최적 충전 시스템 상용화를 위한 기초 자료로 활용하고자 한다.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.65-71
• /
• 2016

In this study, Antimony Tin Oxide (ATO) ion storage layer and $TiO_2$ working electrode were fabricated using Nano Particle Deposition System. NPDS is the cutting-edge technology among the dry deposition methods. Accelerated particles are deposited on the substrate through the nozzle using NPDS. The thicknesses for coated layers were measured and layer's morphology was acquired using SEM. The fabricated electrochromic cell's transmittance was measured using UV-Visible spectrometer and power source at 630 nm. As a result, the integrated electrochromic/DSSC hybrid system was successfully fabricated as an energy harvesting system. The fabricated electrochromic cell was self-operated using DSSC as a power source. In conclusion, the electrochromic cell was operated for 500 cycles, with 49% of maximum transmittance change. Also the photovoltaic efficiency for DSSC was measured to be 2.55% while the electrochromic cell on the integrated system had resulted in 26% of maximum transmittance change.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.81-88
• /
• 2021

In general, a non-explosive nylon wire cutting-based holding and release mechanism has been used to store and deploy deployable solar panels of CubeSat. However, with this method, accessing the solar panel's access port for charging the cube satellite's battery and electrical inspection and testing of the PCB and payloads while the solar panel is in storage is difficult. Additionally, the mechanism must have a reliable release function in an in-orbit environment, and reusability for stow and deploy of the solar panel, which is a hassle for the operator and difficult to maintain a consistent nylon wire fastening process. In this study, we proposed a pin-puller-based solar panel holding and release mechanism that can easily deploy a solar panel without cutting nylon wires by separating constraining pins. The proposed mechanism's release function and performance were verified through a solar panel deployment test and a maximum separation load measurement test. Through this, we also verified the design feasibility and effectiveness of the pin-puller-based separation device.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.471-472
• /
• 2011

탄소배출권이 도시환경에 대한 이슈가 됨에 따라 탄소배출을 줄이는 방법에 대한 관심이 올라갔다. 이런 이유로 옥상에 녹지를 조성하는 Green Roof와 태양열 전지를 이용한 무공해 전기 발전에 대한 관심이 증대되고 있다. 이러한 이유로, 본 논문에서는 Green Roof와 태양열 전지를 이용한 Green Roof의 관리 그리고 에너지 효율을 시각화하는 시스템을 제안한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.355-356
• /
• 2014

항로표지 장비 용품 중 충방전조절기의 특성을 성능 평가 결과를 토대로 알아보았으며, 기존 제품들의 불합격 요인들을 분석하여, 향후 제품 개선을 위한 방향을 제시하였다. 본 연구자료는 태양전지 전원공급시스템의 성능 개선을 위한 기본 자료로 이용하고자 한다.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.56-66
• /
• 2014

In this paper, the solar cell need the characteristic interpreting because the solar cell changes greatly according to the isolation, temperature and load in the photovoltaic development. Moreover, to get many energy in photovoltaic development need the position tracking of the sun according to the environment change and it is necessary to control the output of solar cells up to the time. Simulation and composed microprocessor and sensor chip an power conversion system with boost converter to experiment results are performed to prove the analysis of the converter operation, and to show the possibility of energy harvesting and photovoltaic development need the position tracking small capacitance, the boost rate of boost converter was similar to 167 percent.

• Journal of Korean Society of societal Security
• /
• v.3 no.2
• /
• pp.47-55
• /
• 2010

It was developing of portable hybrid water purification system for clean water production in the disaster area. because there are no way to supply a drinking water to the victims of calamity. currently, the government has been supplying bottled water to victims. but it is a limit to the reserves. It is composed of a filter, a feed pump, a solar-cell, a controller, and a case and is possible supplying a drinking water not to limit time and a place. Field test was carried out to developed portable water purification system and the purified water was satisfied a criterion for a drinking water.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.360-361
• /
• 2018

현재 건설 중장비에는 암전류에 의한 배터리 방전 문제가 발생하고 있고 이에 태양광 충전 시스템을 필요로 한다. 본 논문에서는 6톤급 중장비에 적용 가능한 태양광 컨버터 개발에 대한 내용을 다루며 태양전지의 용량 선정, MPPT 적합성 검토, 독립형 충전 시스템 구현, 배터리 방전 방지 기능의 실효성을 확인한다. PSIM 시뮬레이션을 통해 MPPT 및 충전 로직을 검증하고 실험을 통해 40W급 충전 시스템의 P&O 알고리즘 성능을 확인한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.505-512
• /
• 2012

In this study, an inspection system based on an optical scanning mechanism is developed for the inspection of silicon wafers in solar cells. In particular, a structured hybrid illumination system that can satisfy the illumination requirement for the detection of various defects is designed. In the hybrid illumination system, the optimum illumination conditions are selected by considering the design of experiment in master glass and silicon wafer. The illumination conditions available are B-high, BG-high, BR-high, and BGR-high for master glass and R-middle-B-medium for silicon wafers. By using the illumination conditions for silicon wafers, numerous surface defects like pinhole, scratch, and chipping, can be accurately detected. The hybrid illumination system is expected to be widely used for the inspection of silicon wafers in solar cells.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.55-58
• /
• 2009

Photovoltaic system that is overcoming the problem of fossil fuel, changes the output quantity rapidly according to the temperature of module. so, we studied this principle and considered the method making lower the temperature of module for maximization of electric power production. In this thesis, we concluded that, we fit on below and upper direction of the module to decrease at the same temperature. lower temperature of below direction is more useful for the generating quantity.