• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.575-580
• /
• 2013

The IMU(Inertial Measurement Unit) which is the expensive equipment has been used as a special limited area, usually in measurement of posture of applying to the areas of ship, submarine, aircraft and military equipment application. However, in the current situation, MEMS AHRS technology can replace the high-priced IMU in MEMS AHRS selected application field. In this paper, wireless hull motion measurement system was suggested for measuring key elements of ship's movement such as rolling, pitching and yawing using gyro, acceleration and magnetic sensors of AHRS. In order to reduce the error such as instantaneous acceleration, effects and vibration of geomagnetic, we have adopted the sensors equipped with Kalman filtering. The Wireless hull motion measurement system using AHRS sensors was tested in actual ship and it could easily be applied in limited installation circumstances of the ship. In the future, this system can be useful in the navigation safety and marine accident analysis by using with ship equipment such as INS or VDR in the maritime.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.3
• /
• pp.140-149
• /
• 2002

This paper describes the characteristics of beam-tilting slot away waveguide antennas for mobile DBS reception. As a basic study of slotted waveguide array, design for 16 slot elements located on a broad-wall waveguide is considered. Design parameters such as slot length, space between each slot and cross slot angle of antennas with the beam-tilting characteristics are calculated by method of moments. Based on these results, the radiation waveguide antennas with 16-element $\times$16-array are designed and fabricated. The measured main beam direction angles of the fabricated antennas are 48$^{\circ}$to 50$^{\circ}$depending on the measured frequencies and it shows good agreement with prediction. The measured 3 dB beam width of elevation pattern is about 13$^{\circ}$, and the axial ratio and the gain measured at DBS band are observed 2.8 dB below and 24 dBi above, respectively. In order to evaluate a performance of the fabricated waveguide planar antenna, it is combined with the satellite tracking control system and the field performance test of antenna mounted on a mobile vehicle is carried out at highway. During the measurement, it was possible to watch television without a break signal in a driving vehicle and an excellent performance of the proposed antennas was demonstrated.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.279-280
• /
• 2009

최근 경세성장과 함께 생활수준의 향상으로 인하여 에너지 수요는 매년 증가하고 있으며 그 중에서 하나인 전력수요도 역시 급격히 늘어나고 있는 추세이다. 이와 더불어 투자자원 및 입지확보의 어려움, 환경제약의 문제로 전력 공급의 어려움은 날로 증가되고 있다. 따라서 수요증가를 전력공급 능력의 증진뿐만 아니라 수요관리 측면에서도 필요성이 대두되고 있다. 전력선 통신은 전력선을 매체로 하기 때문에 신규선로의 포설 없이 가전기기 및 정보화 서비스 모뎀들의 네트워크화에 용이할 뿐만 아니라 커버리지 확장에도 뛰어나서 디지털 가전, 원격검침, 전력설비 감시제어, 국가 재난 감시 시스템 등의 기본 통신 방식으로 가장 유력한 기술로써 디지털 가전을 포함한 유비쿼터스 전기설비 네트워크 구성에서 필수적 기술로 채택되고 있기 때문에 지능형 홈 네트워크, 전력IT 부가서비스, 설비감시 네트워크, 유비쿼터스 네트워크 관련 기술에 대한 파급 효과가 매우 크며, 디지털 가전의 기본 통신 방식으로 가장 유력한 기술로써 디지털 가전 구성에서 필수적 기술로 채택되고 있기 때문에 지능형 홈 네트워크 관련 기술에 대한 파급 효과가 매우 크다. 본 연구에서는 전력선통신모뎀을 이용하여 가전기기의 전력 소비를 감지할 수 있는 센서를 내장한 전력선 통신기반의 전력 감시 모듈을 개발하여 실시간 원격 모니터링을 통해 소비전력 패턴을 작성한다. 그리고 전력감시 모듈에 연결된 가전기기의 소비전력 패턴 분석을 통해 전력소비 이상 유무를 감지할 수 있는 알고리즘을 개발, 탑재하여 이상유무를 판단하고 전력소비가 급증할 시 자동으로 전력을 차단하여 화재나 누전의 위험을 방지한다. 이에 본 연구는 전력선통신을 이용하여 전력소비감시 및 이상전력차단에 관한 연구에 관한 것이다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.93-101
• /
• 2012

Bridge deck has a role in a comfortable and safe passage of vehicles. At the same time, it preserves upper structure against the abrasion and shearing due to impact of traffic loads in bridges or has a role to protect the plate from off adverse effect of climatic process as rain, chemicals. Currently, the total number of inspected bridges is 6,248 in the general national road and to maintain effectively, Introduction of GPR system mounted in the vehicle has been considered. In this research, the comparison and analysis of bridge deck condition on general national road has been performed with major variations of superstructure type, span lengths, located region and ages by using 'the current status of road bridge and tunnel' that is provided by MLTM(Ministry of Land, Transport and Maritime Affairs). As a result, Condition assessment grade, superstructure type, age and length were derived as a major factor to determine priority for the condition assessment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.4
• /
• pp.353-362
• /
• 2007

Unlike large satellites, small satellites, such as nanosatellite and microsatellite, can provide a limited interior space for components mounting. In order to mitigate this issue, the compact Bus Electronic Unit(BEU) that integrates satellite electronic modules, combining most of bus subsystems and payload electronic modules into one unit, has been developed for HAUSAT-2 nanosatellite. This paper addresses the design and environmental test result analyses of BEU. The vibration and thermal vacuum tests were conducted at qualification level for the verification of design margin of newly developed BEU. The performance of individual electronic subsystem modules has been verified through performance tests before and after the qualification tests. It was confirmed that the natural frequency of BEU satisfies the design stiffness requirement without structural damage in the vibration test. Thermal analysis results were also almost consistent with test results through modified thermal analysis modeling.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.3
• /
• pp.331-340
• /
• 2021

As the communication industry develops, the development of SoC (System on Chip) is increasing. Accordingly, the paradigm of technology design of industries and companies is changing. In the existing process, companies purchased micro-architecture, but now they purchase ISA (Instruction Set Architecture), and companies design the architecture themselves. RISC-V is an open instruction set based on a reduced instruction set computer. RISC-V is equipped with ISA, which can be expanded through modularization, and an expanded version of ISA is currently being developed through the support of global companies. In this paper, we present benchmarking frameworks ARIA, LEA, and PIPO of Korean block ciphers in RISC-V. We propose implementation methods and discuss performance by utilizing the basic instruction set and features of RISC-V.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.1-8
• /
• 2023

If there is a defect in the wheel bearing, which is a major part of the car, it can cause problems such as traffic accidents. In order to solve this problem, big data is collected and monitoring is conducted to provide early information on the presence or absence of wheel bearing failure and type of failure through predictive diagnosis and management technology. System development is needed. In this paper, to implement such an intelligent wheel hub bearing maintenance system, we develop an embedded system equipped with sensors for monitoring reliability and soundness and algorithms for predictive diagnosis. The algorithm used acquires vibration signals from acceleration sensors installed in wheel bearings and can predict and diagnose failures through big data technology through signal processing techniques, fault frequency analysis, and health characteristic parameter definition. The implemented algorithm applies a stable signal extraction algorithm that can minimize vibration frequency components and maximize vibration components occurring in wheel bearings. In noise removal using a filter, an artificial intelligence-based soundness extraction algorithm is applied, and FFT is applied. The fault frequency was analyzed and the fault was diagnosed by extracting fault characteristic factors. The performance target of this system was over 12,800 ODR, and the target was met through test results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.4
• /
• pp.456-462
• /
• 2011

As the ARRA enacted recently in the United States, the interest in EHR systems have been increased in the field of medical industry. The passage of the ARRA presents a program that provides incentives to office-based physicians and hospitals adapting the EHR systems to guarantee interoperability with various medical standards. Thanks to the incentive program, a great number of EHR systems have been developed and lots of office-based physicians and hospitals have adapted the EHR systems certified by CCHIT. Keeping pace with the rapid changes in the market of healthcare, some enterprises try to push in to the United States healthcare market based on the experience acquired by developing EHR systems for hospitals in Korea. However, the developed system must be customized because of the different medical environment between Korea and the United States. In this paper, therefore, we design and develop an integrated EHR platform to guarantee the interoperability between different medical information systems based on medical standard technologies. In the developed platform, an integrated system has been composed by integrating various basic techniques such as data transmission standards and its methods, medical standard terminologies and its usage, and knowledge management for medical decision-making support. Moreover, medical data can be processed electronically by adapting an HL7 interface engine and the terminologies for exchanging medical information and the standardization of medical information. We develop SeniCare, an EHR system for supporting ambulatory care of the office-based physicians, based on the platform, and we verify the usability of the platform by confirming whether SeniCare satisfies the criteria of "meaningful use" issued by CMS or not.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.664-673
• /
• 2008

Recently, the ubiquitous is handled by maximum topic. New knowledge information and ubiquitous computing evolution have promoted new paradigm transfer and grand change. Also, need technology as powerful engineering approached fairly system and educational guidance side examination necessarily to overcome u-Learning base situation and studying obstacle situations. This treatise embodied handiness examination about attention shortage and excess obstacle (Attention Deficit Hyperactivity Disorder, low ADHD) who must solve so as to be square and level being increase trend in primary school using USB (Universal Serial Bus) terminal system that allow fetters to OSGi (Open Service Gateway Initiative). That OSGi base USB terminal system is easy preservation of information, safety of network, cost-cutting and maintenance by various ubiquitous system that server that load many USB terminals and OSGi uses an USB bus of high speed and construct network, there is advantage of concentration elevation and so on of week and ADHD handled in this treatise because early diagnosis and treatment are serious. The confirmed system application that can supplement paper and pens examination's shortcoming and could solve examination's problem which use computer, and help in student guidance through ADHD simpleexamination who utilize OSGi base USB terminal system. Is available by game system that system for human nature examination or intelligence test and general exam explaining and level studying, order style question investigation program, studying system for disabled person, majority that enforce in public in school this study finding does together.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.6
• /
• pp.1033-1041
• /
• 2017

Path travel time based on departure time (PTTDP) is key information in advanced traveler information systems (ATIS). Despite the necessity, forecasting PTTDP is still one of challenges which should be successfully conquered in the forecasting area of intelligent transportation systems (ITS). To address this problem effectively, a methodology to dynamically predict PTTDP between motorway interchanges is proposed in this paper. The method was developed based on the relationships between traffic demands at motorway tollgates and PTTDPs between TGs in the motorway network. Two different data were used as the input of the model: traffic demand data and path travel time data are collected by toll collection system (TCS) and dedicated short range communication (DSRC), respectively. The proposed model was developed based on k-nearest neighbor, one of data mining techniques, in order for the real applications of motorway information systems. In a feasible test with real-world data, the proposed method performed effectively by means of prediction reliability and computational running time to the level of real application of current ATIS.