• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.193-200
• /
• 2024

This paper describes the design and development of a transmit receiver module(TRM) for mounting on X-band SAR of the NEXTSat-2. The TRM generates the chirp signal with required bandwidth through the DDS in X-band and performs frequency conversion, combination for the signal to transmit and be received and frequency synthesis. Tx path of the TRM produces signals of total 28 bandwidths up to 96.8 MHz and has output signal level of more than + 9.37 dBm. Rx path of the TRM has minimum noise figure of 15.7 dB. The measurement results show that required requirements are satisfied. The TRM is installed on the NEXTSat-2 flight model(FM), launched by KSLV-II(Nuri) on May 23, 2023 and currently operational.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.4
• /
• pp.757-761
• /
• 2024

The need to acquire a multi-mission modular ship to carry out the mosaic warfare of modern warfare is increasing. In such a modular ship, not only domestic R&D equipment/systems but also an manned/unmanned complex system purchased overseas must be mounted together. In order to successfully design/construction a multi-mission modular prototype battle ship and turn it into timely power, it is necessary to apply a new technology so that it can be installed flexibly in a limited space and time. However, the existing welding installation method not only limits flexibility in design/construction due to safety problems, but also has an inherent problem that the cost and time required to correct defects and supplements are excessive. Therefore, this study introduces the current status of next-generation installation devices developed/applied in the advanced navy and the field demonstration results applied to battle ships to provide flexibility in this respect.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.754-759
• /
• 2015

Nowadays, short distance communication systems with low power energy (LPE) are developed for identification and monitoring of site identification of vessel crews and passengers (SIVCP). LPE communication modules, such as Bluetooth low energy (BLE) and Zigbee, are used for short distance communications with LPE. These modules enable 1:N communications and their popularity is growing since the modules can be mounted on movable objects, such as mobile devices and human body. When these modules are used, the important factor that affects their operation time and design are the capacity and size of battery. Therefore, they must be made as small as possible, and the battery should be selected to be slightly smaller than the module. In this study, we calculate the theoretical life of batteries used in SIVCP BLE modules using data sheet and discharge characteristic graph under the condition of a 1/250 transmission-ratio (TR). We thus calculate experimental life by measuring transmission current for the same TR, and low speed mode current for a 1/5000 TR and measure long-term experimental life using 1/25 TR for days. Through these experiments, we verify experimental methods for the prediction and extension of battery life that would enable us to select appropriate sizes of batteries based on vessel usage and passenger types. The selections of the module TR and battery size are important factors affecting the cost reduction of module design, the battery maintenance, and passenger convenience.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.84-92
• /
• 2022

The electro-hydrostatic actuator (EHA) recently has been used in flight control fields for aircraft because of its benefits of minimizing oil leakage and weight, improving safety, and etc. while independently operating the hydraulic power source and eliminating complex hydraulic piping. The aircraft of which EHA is installed inside, has the thermal management issue of EHA, because of its limited cooling source as compared with the aircraft which installs the traditional central hydraulic system. So, the thermal analysis model which predicts the thermal characteristics of EHA, is required to resolve this thermal management issue. In this study, an oil circulation circuit inside the hydraulic power module comprised of hydraulic pump and electrical motor for EHA was applied. This is for the purpose of developing the internal rotary group of hydraulic power module, which operates under the conditions of high rotation speed and hydraulic pressure. After formulating an appropriate thermal analysis model, the thermal analysis results with oil cooled or no oil cooled hydraulic control module were compared and reviewed, for the purpose of predicting the thermal characteristics of EHA.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.5
• /
• pp.432-439
• /
• 2015

MEMS solid thruster module is composed of solid thruster and its control board. It was developed for the purpose of an academic research. Therefore, thermo-mechanical design and verification for space usage were not considered in the design phase. To mount it on a cube satellite without any design modification, technical efforts at the system level structure design is required. In this study, we proposed a structural design concept to mount the MEMS thruster module by using brackets for guaranteeing structure safety under launch loads and easier mating and de-mating of MEMS thruster module during test phase. The effectiveness of the design has been verified through structural analysis and vibration test. In addition, electrical connection method using spring pins between MEMS thruster and control board is effective for guaranteeing the structural safety under launch vibration loads.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.1 s.2
• /
• pp.93-100
• /
• 2003

In this farer, An ADSRC(Advanced Dedicated Short Range Communication) packet communication system developed by ETRI is introduced. The ADSRC system has been developed to provide high-speed, short-range wireless racket communication in roadside environment for mobile office services. The requirements of the ADSRC system for mobile office services and the system design specification to meet them with regard to mobile of nce environment are discussed. The ADSRC packet communication systems consist of the MAC(Medium Access Control) Processor block the OFDM() modem block and the RF block. The MAC processor block handles medium access control. The OFDM modem transmits data packets at up to 24Mbps adaptively and recovers the data from RF block. The ADSRC packet communication system architecture is described.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.209-212
• /
• 2008

During several years, lots of industrial and individual products have been developed based on the text or graphic LCD module which has been gave the short developing period to the developer. With the advent of home networks and intelligent robots, the need for interaction between human and instruments has been increased. Recently, goods with a TFT-LCD come out. But in spite of a simple required performance, the complicated microprocessor, such as ARM processor, is required to interface the TFT-LCD and touch screen. Our research and development is to develope an embedded TFT-LCD module in order to use or apply to the goods through the simple interface by the general users as well as the developers. We adopt the RTOS(real time operating system) in order to operate TFT-LCD independently and various communication protocols are provided in order to offer the simple interface to users and developers.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.66-75
• /
• 2006

This paper addresses the implementation of FTTH system based on Ethernet PON technololy. This system consists of OLT and ONT. OLT supports the maximum 24 Gigabit Ethernet interfaces, and then has the flexibility and the scalability for supplying digital communication and broadcasting convergence service in the near future. OLT system consists of switch module, subscriber module, processor module, and E-PON link module, and has the operating system based on Linux. ONT is installed in customer premise to supply both IP-TV and Internet service. Also ONT has the dedicated interface for IP-TV to improve the transmission characteristics of IP-TV signal. We measure the performance of E-PON MAC through this system and then QoS control characteristics per franc in ONT by separating the virtual link for IP-TV from that for data.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.9
• /
• pp.71-78
• /
• 2008

In this paper, we implement the H.264/AVC baseline decoder by hardware-software partitioning under the embedded Linux Kernel 2.4.26 and the FPGA-based target board with ARM926EJ-S core. We design several IPs for the time-demanding blocks, such as motion compensation, deblocking filter, and YUV-to-RGB and they are communicated with the host through the AMBA bus protocol. We also try to minimize the number of memory accesses between IPs and the reference software (JM 11.0) which is ported in the embedded Linux. The proposed IPs and the system have been designed and verified in several stages. The proposed system decodes the QCIF sample video at 2 frame per second when 24MHz of system clock is running and we expect the bitter performance if the proposed system is designed with ASIC.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1447-1452
• /
• 2010

Ubiquitous society to build basic infrastructure in the power supply and power equipment safety is important. u-City in order to prevent the disaster of u-IT Power Equipment Performance Module and the security for the safety of the u-City is necessary. In this paper, the power unit of u-IT module, temperature sensor, humidity sensor, equipped with sensors arranged throughout the fire, and home distribution boards, Home Network Wall-Pad, Blocker, MPNP black boxes, arc detection, arc safety equipment, outlet of the modular performance evaluation methods and security methods will be studied. u-IT power devices and sensors to analyze the information conveyed by proactive risk and ensure safety, access control, authentication, security safeguards, such as u-IT integrated management system for electrical safety and strengthen the security, safety and security with a u-City will contribute to the construction and operation.