• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.6
• /
• pp.1050-1056
• /
• 2000

To identify the irradiation-induced volatile flavor compounds, which were not detected in unirradiated sample and had positive correlation with the increment of irradiation dose, the volatile flavor compounds of irradiated (0, 1, 3, 5, 10 kGy) chicken were analyzed by liquid liquid continuous extraction (LLCE) and gas ehromatographyimass spectrometry (GC/MS) methods. One hundred twenty nine compounds were detected in irradiated chicken, and these compounds were composed mainly of hydrocarbons (62 compounds), aromatic compounds (44), aldehydes (9), ketones (5) and miscellaneous compounds (10). Among these, only 3 volatile compounds including 2-methylpentanal (r=0.24), 4-methylcyclohexene (r=0.08) and cyclotetradecene (r=0.92), were detected as irradiation-induced volatile flavor compounds in irradiated chicken. However, only cyclotetradecene was selected as a marker compound for detecting irradiation dosages with high correlation coefficient in irradiated chicken.

• Analytical Science and Technology
• /
• v.22 no.1
• /
• pp.109-117
• /
• 2009

The following concentrations of some PAHs were investigated; [benzo(a)anthracene, chrysene, benzo (b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene, benzo(g, h, i)perylene, indeno (1,2,3-c,d)pyrene] in fish(n=168) and shellfish(n=40). The methodology involved saponification and extraction with n-hexane, clean-up on Sep-Pak Florisil Cartridges and determination by HPLC/FLD (High Performance Liquid Chromatograph/Fluorescence Detector). Overall method recoveries for 8 PAHs spiked into these products ranged from 88 to 112%. The mean level of benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k) fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene, benzo(g,h,i)perylene and indeno(1,2,3-c,d)pyrene in cooked fish was ND, ND, 0.0009, ND, 0.01, ND, ND, ND and in cooked shellfish was 1.84, 3.51, 0.81, 0.38, 0.39, 0.04, 0.20, ND, respectively.

• 보존과학연구
• /
• s.33
• /
• pp.45-55
• /
• 2012

A beeswax-treated paper has no air permeability but has the water repellency compared with a general Hanji. Because of these properties, the differences of the aging factors and mechanisms between the outer partition of beeswax-treated paper that is affected by the surrounding conservation environment and the inner partition of it that is not affected are bigger than general books. In this research, we analyzed and compared the aging characteristics through the accelerated aging of the beeswax-treated paper by some air and humidity conditions. The results of the physical and optical analysis after the artificial aging, it was shown that the oxygen accelerates the aging of the beeswax-treated paper and the condition with the humidity 50% RH is more stable than the condition with the humidity 0% RH. The results of the CG/MS analysis that was conducted to figure out the decomposition charateristics of the beeswax according to the air quality and the humidity, a low molecular weight compound that the number of carbon is C9-C20 including a fatty acid such as a palmitic acid was increased as the aging was progressed. However, under the same environment, a compound that the number of carbon is C21-C36 including a hydrocarbon and a aliphatic alcohol and a high molecular weight compound that the number of carbon is more than C34 including a wax ester were decreased. A rate of change according to the air quality and the humidity was similar to the beeswax-treated papers.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.6
• /
• pp.529-536
• /
• 1986

By modified method yellow corvenia(called $Y_3$) was prepared with $4\%$ salt, $4\%$ KCl, $6\%$ sorbitol, $0.5\%$ lactic acid and $4\%$ alcohol extract of red pepper to improve the quality of fermented sea food. In this study, changes of volatile compounds and fatty acid composition obtained from modified fermented yellow corvenia($Y_3$) were experimented during fermentation, comparing with conventional fermented yellow corvenia(called $Y_1,\;20\%$ of salt contents). Total lipid of yellow corvenia was composed of $78.1\%$ of neutral lipid, $21.2\%$ of phospholipid and $0.7\%$ of glycolipid. And monoeonoic acid was held $37.4\%$ of fatty acid composition of total lipid and saturated fatty acid ($34.8\%$), polyenoic acid ($27.7\%$) were followed. Saturated fatty acid($C_{14:0},\;C_{16:0},\;C_{18:0}$) in $Y_1,\;Y_3$ increased, polyenoic acid ($C_{22:6}\;C_{22:5}\;C_{20:5}$) decreased while monoenoic acid($C_{16:1}\;C_{18:1}$) in those was little fluctuated during fermentation. Thirty-three kinds of volatile component in whole volatile compounds obtained from $Y_1,\;Y_3$ at 90 days fermentation were identified, and composed of some hydrocarbons (8 kinds), alcohols (7 kinds), acids (6 kinds), aldehydes(4 kinds), sulfides(2 kinds), ketones (2 kinds), one of phenol and 3 kinds of the other components. Among the whole volatile compounds 2-ethoxy ethanol and was held $79.35\%$ in $Y_3$, whereas nonadecane was held $75.85\%$ in $Y_1$. During fermentation 8 kinds of volatile acids, 5 kinds of amines and 9 kinds of carbonyl compounds were also detected. Those volatile acid such as acetic acid, isovaleric acid, n-caproic acid, n-butyric acid were the major portion of total volatile acids in $Y_3$ at 90 days fermentation. Meanwhile, carbonyl compounds such as ethanal, 2-butanone and butanal were the major ones, while TMA held the most part of volatile amines in $Y_3$ during fermentation. From the result of sniff test, the components which are believed to contribute to the characteristic flavor of fermented product $Y_1,\;Y_3$ are deduced to be volatile acid, carbonyl compounds and amines in order. Conclusively, there was little difference in composition of volatile components, but merely a little difference in content of those between $Y_3$ and $Y_1$.

• Journal of Animal Environmental Science
• /
• v.13 no.3
• /
• pp.211-218
• /
• 2007

This study was carried out to develop the technique for manufacturing activated carbon from livestock manure and to analyse it's odor absorptiveness. Each of layer manure(LM), litter from broiler house(BL) and litter from dairy barn(DL), compost from layer manure(LC) and pig manure(PC), and coconut shell(CS) was used as a raw material. Activated carbon by grinding the raw material, adding the coal tar as a binder, palletizing, drying, heating with $N_2$ gas at $400^{\circ}C$ for 1 hour, activating by reaction with steam at a temperature of $750^{\circ}C$ for 1 hour. Moisture contents of raw material was 44.9% in layer compost, 71.9% in layer manure, 24.4% in broiler litter, 47% in pig manure compost and 33.9% in dairy litter. Volatile matter in layer compost, layer manure, broiler litter, pig manure compost and dairy litter was 18.8%, 31.0%, 49.8%, 22.3% and 11.6%, respectively. Surface area(BET) of activated carbon from layer compost, layer manure, broiler litter, pig manure compost, dairy litter and coconut shell was 259.8, 209.8, 63.5, 442.3, 812.9 and $1,040\;m^2/g$, respectively. Activated carbon made by livestock manure or litter were examined with scanning electron microscope, and micropore was a type of sponge like particles honeycombed with chambers. Pore size of activated carbon was ranged from 0.39 to $5.02\;{\AA}$, but coconut shell was $0.30\;{\AA}$. Iodine absorptiveness of activated carbon from livestock manure was $530{\sim}580mg/g$. But activated carbon made by coconut shell was 1000 mg/g. Each activated carbon could absorb odor compound very well. Absorptiveness of activated carbon from layer manure for hydrogen sulfide and trimethyl amino was 74.5% and 73.9% at the accumulated flux of 60,000 ml, but, in the case of ammonia was only 15.2% at the accumulated flux of 10,000 ml

• Journal of Soil and Groundwater Environment
• /
• v.12 no.4
• /
• pp.25-31
• /
• 2007

Characterizing the risk posed by a mixture of chemicals is a challenging task due to the chemical interactions of individual components that may affect their physical behavior and hence alter their exposure to receptors. In this study, cell tests that represent subsurface environment were carried out using benz[a]anthracene (BaA) and p-xylene focusing on phasetransforming interaction to verify increased mobility and risk of highly sorbed pollutants in the presence of less sorbed, mobile liquid pollutants. A transport model was also developed to interpret results and to simulate the same process on a field scale. The experimental results showed that BaA had far greater mobility in the presence of p-xylene than in the absence of that. The main transport mechanisms in the vadose zone were by dissolution to p-xylene or water. The transport model utilizing Defined Time Steps (DTS) was developed and tested with the experimental results. The predicted and observed values showed similar tendency, but the more work is needed in the future study for more precise modeling. The field-scale simulation results showed that transport of BaA to groundwater table was significantly faster in the presence of NAPL, and the oral carcinogenic risk of BaA calculated with the concentration in groundwater was 15${\sim}$87 times larger when mixed with NAPL than when solely contaminated. Since transport rate of PAHs is very slow in the subsurface without NAPL and no degradation of PAHs was considered in this simulation during the transport, the increase of risk in the presence of NAPL is expected to be greater for the actual contaminated site.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.1
• /
• pp.30-38
• /
• 2002

Disordered carbon and boron-substituted disordered carbons $C_{l-x}B_x(x=0.05,\;0.10,\;0.20)$ were synthesized by Pyrolysis of LPG(liquid Propane gas)and $BCl_3$. Their electrochemical properties as anode materials for Li-ion secondary batteries were then investigated. When PVDF is added to the sample in a weight ratio 5 : 95, the disordered carbon with x=0.00 had the first discharge capacity 374 mAh/g. Its cycling performance was relatively good from the second cycle and it had the discharge capacity 258 mAh/g at the 10th cycle. When PVDF is added to the sample in a weight ratio 5 : 95, the sample with x=0.05 among the samples $C_{l-x}B_x(x=0.05,\;0.10,\;0.20)$ exhibited the largest first discharge capacity 860 mAh/g and discharge capacity 181 mAh/g at the 10th cycle. All the samples had similar cycling performances from the second cycle. The sample $C_{0.90}B_{0.10}$ showed the best electrochemical properties as a anode materials fur Li-ion secondary battery from the view points of the first discharge capacity(853 mAh/g when $10w1.\%$ PVDF is used), cycling performance, discharge capacity(400mAh/g at the 10th cycle when $10wt.\%$ PVDF is used). All the samples showed generally larger charge and discharge capacities when $10wt.\%$ PVDF ratter than $5wt.\%$ PVDF is used. The plateau region in the range of voltage lower than 1.25V becomes larger probably since the structure becomes less disordered by the addition of boron. When boron is added, the charge and discharge capacities decreased suddenly at the second cycle. This may be become only a part of Li are reversibly deintercalated and intercalated and a part of Li which are strongly combined with B are not deintercalated. The increases in charge and discharge capacities are considered to be resulted from the increase in the potential of Li in the boron-added carbons, caused by the strengthening of the chemical bond between the intercalated Li and the boron-carbon host since the boron acts as electron acceptor.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1972.03a
• /
• pp.5-6
• /
• 1972

Noise and air pollution, which accompany the development of industry and the increase of population, contribute to the deterioration of urban environment. The air pollution level of Seoul has gradually increased and the city residents are suffering from a high pollution of noise. If no measures were taken against pollution, the amount of emission of pollutant into air would be 36.7 thousand tons per year per square kilometer in 1975, three times more than that of 1970, and it would be the same level as that of United States in 1968. The main sources of air pollution in Seoul are the exhaust has from vehicles and the combustion of bunker-C oil for heating purpose. Thus, it is urgent that an exhaust gas cleaner should be instaled to every car and the fuel substituted by less sulfur-contained-oil to prevent the pollution. Transportation noise (vehicular noise and train noise) is the main component of urban noise problem. The average noise level in downtown area is about 75㏈ with maximum of 85㏈ and the vehicular homing was checked 100㏈ up and down. Therefore, the reduction of the number of bus-stop the strict regulation of homing in downtown area and a better maintenance of car should be an effective measures against noise pollution in urban areas. Within the distance of 200 metres from railroad, the train noise exceeds the limit specified by the pollution control law in Korea. Especially, the level of noise and steam-whistle of train as measured by the ISO evaluation can adversely affect the community activities of residents. To prevent environmental destruction, many developed countries have taken more positive action against worsening pollution and such an action is now urgently required in this country.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.247-256
• /
• 2012

Stable carbon isotope ratio of oil components are known to be unaffected by weathering processes and thus has been widely used to determine the origin of spilled oil. In this study, molecular index and composition of stable carbon isotope in 15 crude oils and petroleum product were analyzed and used as oil fingerprints to determine the discriminating power of each fingerprinting method among target crude oils. Through the fingerprints of alkane distribution only Bintulu and B-C(1%) were distinguishable from other crude oils. The pristane/phytane ratio can classify the crude oils into three groups but differentiation of crude oils within a group was impossible using the ratio. The crude oils of A.L., A.S.L., Foroozan and B-C(1%) were differentiated from the other oils using PAH source recognition indexes of C2D/C2P and C3D/C3P. The usage of 4-mD/1-mD and 2/3-mD/1-mD ratio was able to distinguish A.S.L., Bintulu and Oman from the other crude oils. However the PAH source recognition ratios in the other crude oils were similar and thus they were impractical to be used for source identification among the target crude oils. Stable carbon isotope ratios of alkanes were able to uniquely specify each crude oil in the plot of ${\delta}^{13}C_{C21}$ and ${\delta}^{13}C_{C25}$ except A.L., A.M., Qatar-Marine, B-C(1%). The oil fingerprinting method using stable carbon isotope ratios of individual alkane compounds showed more discriminating power among the target crude oils than the conventional source recognition indexes of PAHs or alkanes.