• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.517-522
• /
• 2001

The purpose of this study is to investigate the thermal embrittlement and the mechanical properties of 2.25Cr-1Mo steel aged at high temperature and stress for 250 hours. Original, aged artificially material were tested to obtain the hardness and impact absorbed energy. Hardness and impact absorbed energy decreased with the increasing aging time. The carbide morphology with the thermal embrittlement was found to contribute to the mechanical property change by X-Ray diffraction method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.7 s.178
• /
• pp.1771-1778
• /
• 2000

The purpose of this study is to investigate the thermal embrittlement and the mechanical properties of 2.25Cr-1Mo steel aged at high temperature for the extended periods. Original, aged artificiall y and used material were tested to obtain the tensile strength, hardness and impact absorbed energy. Tensile strength, hardness and impact absorbed energy decreased with the increasing aging time. The carbide morphology with the thermal embrittlement was found to contribute to the mechanical property change by X-Ray diffraction method.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.1 no.3 s.3
• /
• pp.83-92
• /
• 2001

Field investigations for subsurface soil and groundwater at a gas station showed that the site was severely contaminated and even petroleum compounds as free liquid state were observed. Pilot-scale soil flushing and soil vapor extraction process(SVE) were applied to evaluate the effectiveness of pollutants removal. Surfactant solution, Tween 80, was used to enhance the solubility of petroleum compounds and resulted in about 10 times increase on TPH(Total Petroleum Hydrocarbon) concentration. As for SVE method, maximum concentration of TPH and BTEX reached within 24 hours of extraction and then continuously decreased. Considerations on the groundwater level and the kinetic limitation for volatilization of contaminants have to be taken into account for the effective application of SVE process.

• Membrane Journal
• /
• v.22 no.6
• /
• pp.381-394
• /
• 2012

Recently, a variety of chemical and physical methods are employed to separate ionic materials from complex aqueous. Most of all, membrane pertraction using contactor has been considered as alternative recovery and separation system in field of chemical, petrochemical and medicines because heavy metals, hydrocarbon based materials in contaminants like wastewater can be recovered by pertraction system. Also, pertraction process has characteristics such as ease of operation, lower energy consumption and operational cost, higher selectivity. This work investigates some example of developed membrane and their performance for the application of pertraction process.

• Analytical Science and Technology
• /
• v.11 no.5
• /
• pp.321-331
• /
• 1998

The separation and sample extraction methods of 19 polycyclic aromatic hydrocarbons (PAHs) in water samples were investigated by gas chromatography/mass spectrometry (GC/MS) and some extraction methods involved liquid-liquid extraction, disk extraction and solid-phase extraction methods. The separation of 19 PAHs was possible by partial variation of oven temperature of GC/MS in temperature range $80{\sim}310^{\circ}C$. Extraction procedures of PAHs in water samples were somewhat modified and compared as extraction recoveries and the simplicity of methods. Extraction recoveries of PAHs were 71.3~109.5% by liquid-liquid extraction method. By using disk extraction, good extraction recoveries (80.7~94.9%) were obtained in case of $C_{18}$ disk extraction method by filtration. And extraction recoveries of PAHs by $C_{18}$ solid-phase were in the range of 51.8~77.9%. Method detection limits (S/N=5) of 19 PAHs were in the range of 0.25~6.25 ppb by liquid-liquid extraction and solid-phase extraction and 0.05~1.25 ppb by disk extraction methods.

• Applied Biological Chemistry
• /
• v.35 no.1
• /
• pp.55-63
• /
• 1992

The essential oil of Korean ginger(Zingiber officinale Roscoe) was isolated by liquid carbon dioxide extraction method and fractionated into one hydrocarbon fraction and two oxygenated hydrocarbon fractions by using silica gel column chromatography. The compositions of the resulting oils were investigated by GC and GC-MS spectrometry. Out of 102 identified compounds, 44 were identified by comparing GC retention time and mass spectral data with authentic samples and 58 were tentatively identified according to mass spectral data only. The major compounds of hydrocarhon fraction were $zingiberene,\;{\beta}-sesquiphellandrene,\;{\gamma}-bisabolene,\;{\gamma}-cardinene,\;ar-curcumene$, and those of oxygenated hydrocarbon fractions wee geranal, sesquisabinene hydrate, borneol and zingiberenol. The major compounds of ginger oil were zingiberene, $citronellol+{\beta}-sesquiphellandrene,\;geranial,\;{\gamma}-bisabolene\;and\;ar-curcumene+geranyl\;acetate$, and ginger oil contained higher amounts of sesquiterpene hydrocarbons. The yield of extract was 6.96%.

• KSBB Journal
• /
• v.17 no.4
• /
• pp.357-364
• /
• 2002

For the effecient extraction methods of essential oil, pretreatment of leaves, ratios of water and leaves, extraction time, and collection season from the Chamaecyparis obtusa and Chamaecyparis pisifera leaves were studied. The chemical composition of essential oil was analyzed by GC-MS. The yield of essential oil from ground leaves was higher than that of chopped leaves. The yield of essential oil was not affected much by mixing ratios of water and leaves. The yield of essential oil reached maximum after 5 hours. The content of essential oil of C. obtusa leaves collected during winter was 4.5%, whereas the content of essential oil of C. pisifera collected during fall was 5.3%. The composition of essential oils extracted form C. obrusa and C. pisifera was different. The major constituents in the essential oil of C. obtusa were monoterpene as limonene, terpinene-4-ol, ${\gamma}$-selinene, and a-cedrene, and those of C. pisifera was monoterpens as ${\alpha}$-pinene, myrcene, limonene, bornyl acetate, ${\beta}$- caryophyllene, longifolene, and ${\beta}$-cedrene.

• Analytical Science and Technology
• /
• v.25 no.6
• /
• pp.467-475
• /
• 2012

A gas chromatography-mass spectrometric (GC-MS) method was developed for determining 17 hazard compounds containing phenols, polycyclic aromatic hydrocarbons and pesticides in surface water. A 1.0 L surface water sample was placed in a separatory funnel and saturated with NaCl, and the solution was extracted with 40 mL of methylene chloride. Under the established condition, the lowest quantification limit was 1.0-10 ng/L and the relative standard deviations were less than 22%. The method was used to analyze 70 surface water samples collected from 35 regions in Gum-River. The samples revealed the compounds concentrations in the range of 1.1-26,604 ng/L. Maximum concentrations of compounds detected were not exceeded guidelines established in other countries. The developed method may be valuable for monitoring hazards in water.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.510-515
• /
• 2011

The pyrolytic reaction of 1,1-dichloroethylene($CH_2CCl_2$) has been conducted to investigate thermal decomposition of chlorocarbon and product formation pathways under hydrogen reaction environment. The reactions were studied in a isothermal tubular flow reactor at 1 atm total pressure in the temperature range $650{\sim}900^{\circ}C$ with reaction times of 0.3~2.0 sec. A constant feed molar ratio $CH_2CCl_2:H_2$ of 4:96 was maintained through the whole experiments. Complete decay(99%) of the parent reagent, $CH_2CCl_2$ was observed at temperature near $825^{\circ}C$ with 1 sec. reaction time. The important decay of $CH_2CCl_2$ under hydrogen reaction environment resulted from H atom cyclic chain reaction by abstraction and addition displacement. The highest concentration (28%) of $CH_2CHCl$ as the primary product was observed at temperature $700^{\circ}C$, where up to 46% decay of $CH_2CCl_2$ was occurred. The secondary product, $C_2H_4$ as main product was detected at temperature above $775^{\circ}C$. The one less chlorinated ethylene than parent increase with temperature rise subsequently. The HCl and dechlorinated hydrocarbons such as $C_2H_4$, $C_2H_6$, $CH_4$ and $C_2H_2$ were the main products observed at above $825^{\circ}C$. The important decay of $CH_2CCl_2$ resulted from H atom cyclic chain reaction by abstraction and addition displacement. The important pyrolytic reaction pathways to describe the features of reagent decay and intermediate product distributions, based upon thermochemical and kinetic principles, were suggested.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.3
• /
• pp.34-40
• /
• 2000

A multisample extraction device was newly designed for efficient extraction of dissolved lipophillic organic compounds from sea water sample. This device allowed extraction of organic compounds from up to 96 sample at a time using 96 multifolder on the principle of solid phase extraction with commercially available octadecyl silane (ODS) cartridges. The recovery yield of the new divice was higher than 90 % while that of conventional liquid-liquid extraction process are only 60 - 70 %. The amount of solvent required for the new device could be reduced to less than 20㎖ per 1ℓ of sample while 1 - 2 ℓ of solvent were used in the conventional liquid-liquid extraction process. The usefulness of this novel method was demonstrated with sea water samples collected from Yellow sea, and the qualitative and quantitative analyses results of the dissolved hydrocarbon showed this method was superior to that of conventional liquid-liquid extraction process in efficiency and reliability.