• Korean Journal of Microbiology
• /
• v.31 no.4
• /
• pp.261-266
• /
• 1993

A new methyltrophic bacterium which utilizes methanol as a sole source of carbon and energy was isolated from soil. It was Gram-negative, nonmotile, nonspore-forming rod, and strictly aerobic bacterium. Catalase and oxidase activities were present. Nitrate was reduced to nitrite. Vitamins and other growth factors were not required. Generation time was 1.6 hr under the optimal condition. The isolate assimilated methanol via the ribulose mono-phosphate pathway (Enter-Doudoroff varient) and did not have .alpha.-ketoglutarate dehydrogenase. It assimilated ammonia through glutamate dehydrogenase. The guanine plus cytosine content of the DNA was 61.0 mol%. The celular fatty acid composition was primarily straight-chain saturated $C^{16 : 0}$ acids (palmitic acids) and unsaturated $C_{16 :1}$ acid (palmitoleic acids), and the isolate also contained two unidentified $C_{17}$ branched fatty acids. The major ubiquinone was Q-8, and Q-6 and Q-7 were present as minor components. Phosphatidylethanolamine and phosphatidylglycerol were predominantly present, and diphosphatidyglycerol was also detected. Based on the physiological and biochemical properties, the isolate was assigned to a novel species of the genus Methylobacillus, Methylobacillus methanolovorus sp. nov.

• Journal of Powder Materials
• /
• v.4 no.3
• /
• pp.170-178
• /
• 1997

An investigation was performed to apply the M3/2 grade high speed steel for metal injection molding using both prealloyed and elementally blended powders. The injected samples were subjected to a debinding step in $H_2/N_2$ gas atmosphere at a ratio that affected the carbon content of the material. The carbon content ranged from 1.4wt.% to 1.43wt%. with increasing $H_2$ content up to 80% $H_2$ in $H_2/N_2$ atmosphere for the prealloyed powders. The carbon contents of the elementally blended powders exhibited 1.44wt.% and 1.62wt.% at 10% $H_2/N_2$ and 20% $H_2/N_2$ gas, respectively. This level decreased to 0.17wt.% upon increasing the $H_2$ content. The sintered density of both powders increased rapidly as the temperature reached the liquid phase forming temperature. After forming the liquid phase, the density rapidly increased to the optimum sintering temperature for the prealloyed powders, whereas the density of mixed elemental powders goes up slowly to the optimum sintering temperature. The optimum sintering temperature and density are 126$0^{\circ}C$ and 97.3% for the prealloyed powders and 128$0^{\circ}C$ and 96.9% for the elementally blended powders, respectively. The microstructure of the specimen at the optimum sintering temperature consisted of fine grains with primary carbides of MC and $M_6C$ type for the prealloyed powders. The elementally blended powders exhibited coarse grains with eutectic carbides of MC, $M_2C$ and $M_6C$ type.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.11-15
• /
• 1998

Carbofuran was incubated for four weeks in five types of paddy soil samples at $25^{\circ}C$. The soil samples prepared in the study were as follows : control soil, sterilized soil, 10% cellulose added soil, 10% cellulose and 1% ferrous sulfate added soil, and 10% cellulose and 1% magnesium sulfate added soil. The degradation rate of carbofuran was significantly decreased(p<0.05) in sterilized soil.The degradation rate of carbofuran was significantly decreased by addition of cellulose(p<0.05) in femous sulfate added soil and magnesium sulfate added soil(p<0.01).

• Analytical Science and Technology
• /
• v.5 no.2
• /
• pp.159-167
• /
• 1992

An improved and accurate method for the determination of linear alkybenzene sulfonate(LAS) in river water is described by using gas chromatography and GC/MS. The gas chromatograph equipped with BP-5 capillary column was satisfactory for isolation of the homologues and isomers of LAS in river water. Four LAS homologues, $C_{10}$, $C_{11}$, $C_{12}$, $C_{13}$ alkyl chains were determined in Jungrang stream, Jinwi stream and down stream of Han river tributary. Especially $5-C_{11}$, $6-C_{11}$, $2-C_{12}$ and $6-C_{13}$, $7-C_{13}$ of LAS were identified by mass chromatogram. Different composition of LAS in standard and river water expressed the distribution and fate of LAS in river water. The remarkable reduced content of $C_{12}$ and $C_{13}$ in river water implied that the biodegradation of LAS more easily occured in longer alkylchain one. This method would be applicable for determination of LAS in water with high resolution and sensitivity.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1164-1170
• /
• 2002

The effect of fly ash addition to the kaolin block has been investigated. The addition affected the firing temperature and physical properties such as water absorption and compressive strength. The starting materials were from korea natural resources and the fly ash were from the power plant using coal as fuel, containing free carbon of 8∼9 wt%. The starting natural materials were mixed with 5 different proportions of fly ash, pressed and then sintered at 1050, 1100, 1150 and 1200${\circ}C$. With sintering temperature, water absorption decreased and compressive strength increased. When specimens were sintered at the temperature lower than 1100${\circ}C$, water absorption increased and strength decreased with fly ash content. In contrast, when sintering was done at the temperature higher than 1150${\circ}C$, water absorption increased with fly ash content similarly but strength was improved.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.536-541
• /
• 2003

Unsaturated poly(3-hydroxyalkanoate) (UPHA) was biosynthesized and the properties of drug delivery using the polymer matrix were investigated. The biosynthesis of UPHA was carried out by pH-stat fed batch fermentation of Pseudomonas oleovorans (ATCC 29347) grown solely with 10-undecenoic acid as a carbon source. The physical and chemical properties of the biosynethesized UPHA were characterized using NMR, FT-IR, GPC and DSC. The drug release experiments were carried out using HPLC with a diffusion cell fur the release amount of ketoprofen as model drug. The effects of crosslinking degree, patch thickness, and enhancer on the drug release were studied. The drug release rate was linearly decreased and consistent with increased crosslinking degree of the polymer matrix. The duration of drug release was enhanced by the Increased patch thickness. The drug release rate was increased with increased amount of propylene gylcol as an enhancer.

• Microbiology and Biotechnology Letters
• /
• v.16 no.5
• /
• pp.352-357
• /
• 1988

Twenty-five out of 35 strains isolated from fermented corn meal produced folic acid. Bacillus licheniformis strain 6 and Enterobacter cloacae strain 18 produced the largest quantities of 1830$\pm$271 ng and 1350$\pm$161 ng per 100$m\ell$ of the assay broth, respectively. B. licheniformis produced maximum yields when initial pH values were 6,7, or 8 and were incubated at 35$^{\circ}C$ for 5 days. The initial pH (range 4-8) had no effect on folic acid production by E. cloacae； 55 $^{\circ}C$ for 5 days was optimal for this bacterium. Added carbohydrates had no effect on the production of total folic acid in the bacterial cells in pure or mixed cultures. However, in their growth media, carbohydrates enhanced the production of free and total folic acid by E. cloacae and in the mixed cultures. Added carbohydrates had no significant (P < 0.05) effect on the production of free and total folic acid by B. licheniformis.

• Journal of Adhesion and Interface
• /
• v.14 no.3
• /
• pp.146-159
• /
• 2013

In the present study, stabilized rayon fabrics were prepared from fast isothermal stabilization processes, which were carried out within four minutes at $350^{\circ}C$. The effects of ultrasonic cleaning and chemical pre-treatment on the chemical composition, physical characteristics, X-ray diffraction pattern, thermal stability and shape of the stabilized rayon fabrics were investigated extensively. In order to reduce the weight loss and thermal shrinkage of rayon fabrics occurring during the stabilization process, ultrasonic cleaning was first conducted and then chemical pre-treatments using $NH_4Cl$, $Na_3PO_4$, $H_3PO_4$, and $ZnCl_2$ were performed, respectively. The results indicated that both ultrasonic cleaning and chemical pre-treatment influenced the weight loss, thermal shrinkage, microstructure, carbon content, thermal stability and fabric shape of stabilized rayon fabrics. Also the results depended on the fast-stabilization time and the type of chemical pre-treatment agents used.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.987-992
• /
• 2001

A refractory grade low-cost silicon nitride powder was chemically analyzed, purified, and gas pressure sintered with the sintering additives. As-received powder contained a significant amount of free-Si, 0.72 wt% of Fe, 0.5 wt% of al and 0.31 wt% of Ca. Oxygen and carbon contents of the powder were 3.3 wt% and 0.4 wt%, respectively, and it consisted of 96% of $\beta$-phase and 4% of $\alpha$-phase. After lowering the Fe content and nitriding treatment, the powder was sintered with 6 wt% yttria and 2 wt% alumina for 1 h between 1823 K and 2123 K in order to examine the sintering behavior. Fully dense samples were obtained by sintering at 2123k for 2h. For comparison, a commercially available high-grade powder was also sintered at the same time. The low-cost powder showed much slower densification rate than the high-grade powder. Fully dense sample prepared from the low-cost powder contained a number of coarse grains with a low aspect ratio, and its hardness, fracture toughness, flexural strength and thermal shock resistance were not as good as those of the sample prepared with the high-grade powder.

• Elastomers and Composites
• /
• v.42 no.3
• /
• pp.151-158
• /
• 2007

MWNTs have been widely investigated due to unique properties of such as good electrical conductivity and thermal stability in polymer composites industries. This paper established the procedure to fabricate PMMA/MWNT composites by a modular intermeshing co-rotating twin screw extruder with L/D ratio of 42. The electrical properties of PMMA/MWNT composites with different content of MWNT have been investigated. A sheet resistance percolation was observed at 4 wt% of MWNT for the melt processed composites. Sheet resistance of PMMA/MWNT composite film containing 4 wt% of MWNT was nearby $10^4{\Omega}/sq$ and this shows the possibility of potential application to EMI (Electronic Magnetic Interference) shielding materials. The characteristics of composites were analyzed by TGA, DSC, and SEM. In addition, MFI (Melt Flow Index) has been measured to analyze the rheological property.