• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.231-245
• /
• 2007

The forged iron axe of the middle 3rd Century found in the No. 2 wood-framed tomb from the Hwangseongdong site, Gyeongju is rectangular on the plane level. The iron axe shines in met-allic luster, which is light grey with pale creamy tint. The result of X-ray diffraction analysis shows that the axe consists of magnetite and geothite, which can explain why the composition and texture of the original ore has been kept intact. There are fine-grained quartz, calcite, mica, magnetite, amphibole, unknown tungsten minerals, pyroxene and olivine inside the axe. Those must be the impurities that they failed to remove in the thermal treatment process. Generally, the iron axe consists mainly of pearlite texture coexisting ferrite and cementite, and show high carbon contents with homogeneous distribution. It can be interpreted the axe was carburized after the material was made to resemble pure iron. The decarbonization work didn't go well along the process marks. Crude ores of the iron axe are possible utilized by magnetite from the Ulsan mine on the basis of the occurrences and inclusions. It's estimated that the original ore was bloom produced in low-temperature reduction and formed around in $727^{\circ}C$, which is eutetic temperature.

• Research in Plant Disease
• /
• v.12 no.2
• /
• pp.129-133
• /
• 2006

A bacterial disease of small red bean (Phaseolus angularis) was observed on field-grown plants in Suwon in year 2003. Leaf symptoms initially appeared as water-soaked spots that gradually enlarged, became flaccid and necrotic and were often bordered by a small zone of lemon yellow tissue. In the case of severe infection, dead leaves were defoliated. Pod symptoms consisted of the lesions that were generally circular, slightly sunken and dark reddish brown. Isolation made from diseased leaves on yeast extract dextrose calcium carbonate agar yielded nearly pure cultures of a yellow-pigmented bacterium typical of a xanthomonad. Three bacterial strains were purified and used for further tests. Pathogenicity of strains was confirmed on 3-week-old small red bean plants sprayed with bacterial suspensions containing $10^8 cfu/ml$ of phosphate buffered saline. The representative Xanthomonas strains isolated from small red bean were compared with X. axonopodis pv. phaseoli and X. axonopodis pv. phaseoli var. fuscans type strains for fatty acid profiles, biochemical tests and metabolic fingerprints using Biolog GN2 microplate, showing that all outcomes were indistinguishable between our isolates and reference strains. Two of three strains produced a melanin-like brown pigment extracellularly on King's medium B agar. These results suggest that this new small red bean disease observed in Suwon is bacterial fuscous blight caused by X. axonopodis pv. phaseoli and X. axonopodis pv. phaseoli var. fuscans.

• Research in Plant Disease
• /
• v.12 no.2
• /
• pp.134-138
• /
• 2006

A new bacterial disease of broccoli (Brassica oleracea var. italica) was observed on field-grown plants in Pyungchang during 2003 and 2004. Seedling infections first appeared as a blackening along the margins of the cotyledon. Cotyledon shriveled and dropped off. Infected seedlings were stunted and yellowed and eventually died. The disease was easily recognized by the presence of yellow, V-shaped, or U-shaped areas extending inward from margin of the leaf. As the disease progressed, the yellow lesions turned brown and the tissues died. Isolations made from diseased leaves on yeast extract dextrose calcium carbonate agar yielded nearly pure cultures of a yellow-pigmented bacterium typical of a xanthomonad. Two bacterial strains were purified and used for further tests. Pathogenicity of strains was confirmed on 3-week-old crucifer (cabbage, Chinese cabbage, kale, radish and broccoli) plants cut by scissors with bacterial suspensions containing $10^8 cfu/ml$ of phosphate buffered saline. The Biolog and fatty acid analyses and 16S rDNA sequencing of two strains (SL4797 and SL4800) from broccoli black rot showed that they could be identified as X. campestris pv. campestris because of their high similarity to the tester strain (X. campestris pv. campestris NCPPB528) with a match probability of 100%. This is the first report of black rot of broccoli in Korea.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.620-626
• /
• 2019

In this study, the effects of the structural properties of the catalyst on CO oxidation reaction by controlling the $Cu/CeO_2$ catalyst amount and calcination temperature were studied, and also the CO conversion rate of the catalyst at the temperature range of $100{\sim}300^{\circ}C$ was evaluated. XRD, Raman, BET, $H_2-TPR$, and XPS analyses were performed to confirm the effect of changes in the structural properties on the chemical properties of the catalyst. The result confirmed that a substitution bond between Cu and Ce was formed and a lot of Cu and Ce bonds were formed when the catalyst carrying 5 wt.%. Of Cu was calcined at $400^{\circ}C$. The Cu-Ce binding was confirmed by peak shifts in Raman analysis and also peaks appeared in $H_2-TPR$. In addition, the balance state analysis demonstrated that a lot of surface labile oxygen molecules are formed, which can be more easily contributed to the reaction with $Ce^{3+}$ species known to form a substitution bond easily. It was found that CO conversion rate of the catalyst used in this study was close to 100% at $150^{\circ}C$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.4
• /
• pp.171-176
• /
• 1975

The rate and extent of decomposition of rice straw and compost in an acid sulfate soil amended with urea and lime and incubated under aerobic and anaerobic(flooded) conditions were investigated in the laboratory. Results are summarized as follows: 1. The rate of compost(alone) decomposition in a flooded soil was more than twice as high as all other treatments, which included rice straw+urea, rice straw+lime, rice straw (alone), and compost+lime. Lime appeared to suppress the decomposition of compost in a flooded soil but actually enhanced its decomposition under aerobic conditions. 2. Compost decomposition in both anaerobic and aerobic environments was characterized by single maximum peak rates of $CO_2$ evolution that were reached soon after the start of incubation. 3. Both urea and lime greatly increased the rate and extent of rice straw decomposition in the soil when incubated aerobically, although urea had a greater effect than did liming. Decomposition rates were characterized by the appearance of two maximum peak rates, a greater primary peak and a smaller secondary peak. 4. The percent decomposition of rice straw in soil incubated aerobically was approximately half (10.8%) that of compost(23.1%). However, percent decomposition of these substrates in soil amended with lime was essentially the same; i.e., rice straw+lime (29.4%) and compost+lime(31.6%). 5. There is a need to investigate the possible interaction between the addition of lime (pH) and supplemental nitrogen applied to acid sulfate soils and how this interaction might affect the decomposition of organic wastes and residues.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.1
• /
• pp.4-11
• /
• 2007

There have been increasing concerns about decreasing crop productivity due to salt accumulation in greenhouse soils. The objective of the study was to investigate the impact of rice straw and woodchip application to a salt accumulated greenhouse soil on crop productivity and soil quality. The application of rice straw (RS) and woodchip (W) increased tomato yield and decreased blossom-end rot, and increased yield of Chinese cabbage compared with standard recommended fertilization ($204-103-122kg\;ha^{-1}\;N-P_2O_5-K_2O$ for tomato and $222-64-110kg\;ha^{-1}\;N-P_2O_5-K_2O$ for Chinese cabbage), while less soil residual nitrate, phosphatephosphorus, and potassium. In addition to the organic material application, fertilization reduction based on soil testing may also contribute to relatively low level of soil residual nutrients. Application of the organic material reduced soil bulk density presumably because of improved soil aggregation and structure, and increased biomass C and dehydrogenase activity. In comparison to rice straw, woodchip application resulted in higher crop yield, less amount of soil residual nitrate and lower soil EC, and greater biomass and dehydrogenase activity. The results obtained in this study indicateshowed that woodchip amendment along with reduced fertilization based on soil testing can be one of essential management practices for salt accumulated greenhouse soils.

• Resources Recycling
• /
• v.30 no.6
• /
• pp.53-60
• /
• 2021

In EAF steelmaking industries, MgO content in slag increases due to the addition of dolomite flux to protect refractory lines of furnaces and improve the desulfurization capability of slag. In addition, coal powder is injected in the molten steel bath to increase the energy efficiency of the process. In this regard, the utilization of waste MgO-C refractory material as a flux was examined because it has high amounts of MgO (>70%) and graphite carbon (>10%). A series of experiments were carried out using industrial EAF slag with added light burnt dolomite and waste MgO refractory material from a Korean steel company. The results for the addition of the two fluxes were similar in terms of slag basicity; therefore, it is expected that waste MgO-C refractory material can successfully replace dolomite flux. In addition, when the waste MgO-C refractory material was added as flux, slag foaming phenomenon was demonstrated because of the reaction between the graphite from the refractory material and iron oxides in the slag.

• Journal of Climate Change Research
• /
• v.3 no.3
• /
• pp.211-224
• /
• 2012

Technology for energy recovery from waste can reduce the greenhouse gas emissions. So recently, there are several companies using RDF, RPF, WCF instead of using only coal fuel and it's part of the fuel on the increase. In this study, we developed Wood chip fuel $CO_2$ emission factor through fuel analysis. It's moisture content is 23%, received net calorific value is 2,845 kcal/kg, and received basis carbon is 34%. The result of emission factor is $105ton\;CO_2/TJ$, it's 5.9% lower than 2006 IPCC guideline default factor $112ton\;CO_2/TJ$. The gross GHG(Greenhouse gases) emissions of plant A is $178,767ton\;CO_2 eq./yr$, and Net GHG emissions is $40,359ton\;CO_2 eq./yr$. Therefore, the reduction of GHG emissions is $138,408ton\;CO_2/yr$ through using WCF, and I accounts for 77% of all GHG emissions.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.581-593
• /
• 2018

Studies on ancient iron production technologies still have challenges to overcome, although there have been many results that have enabled us to understand these old technologies. The purpose of this study is to propose a suitable temperature condition for smelting experiments. The target for reconstruction is a smelting-smithing process in the ancient Jungwon area, and the experiment was designed on the basis of published research, such as archaeological evidence. Experiment A was performed at a low temperature to produce low-carbon iron, while Experiment B was conducted at a relatively high temperature to synthesize high-carbon iron. In addition, the low-carbon iron proved to be suitable for the smithing process. Moreover, aspects such as the microstructure and chemical composition of the slag and the surface condition of the furnace wall showed that the low-temperature smelting process was closer to the ancient method. It is important to mention the premise that the reconstruction of ancient technology can be achieved when the results of an experiment replicate the conditions of a real site. The results show that direct smelting, which produces low-carbon iron bloom under a low-temperature condition, should be the subject of smelting experiments concerning the iron production technologies of the ancient Jungwon area.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.3
• /
• pp.132-139
• /
• 2019

EPS (expanded polystyrene) is one of the most used building materials for insulation that is favored by its excellent heat insulation, economical efficiency and lightweight characteristics. However, EPS is vulnerable to the fire and producing large amount of toxic gases in case of fire. Therefore, ultra-lightweight geopolymer which can replace EPS is fabricated by using IGCC (integrated gasification combined cycle) fused slag and Si sludge as raw materials and the possibility of replacement on ultra-lightweight geopolymer for EPS as an insulation building material was evaluated in this study. Ultra-lightweight geopolymer can be fabricated with the pulverized IGCC fused slag having low carbon content and density, compressive strength, thermal conductivity were $0.064g/cm^3$, 0.04 MPa, and 0.072 W/mK, respectively. The thermal conductivity of ultra-lightweight geopolymer is 1.5~2.0 times higher than that of EPS suggested in the KS M 3808; however, the thermal conductivity value of geopolymer is meaningful and competitive to that of EPS in the market. Therefore, ultralightweight geopolymer can be applicable to the building material for thermal insulation purpose and have an enough possibility to replace EPS in the future because it is not only much safer than EPS in case of fire but also it can be fabricate by using waste materials from the industry.