• Composites Research
• /
• v.36 no.3
• /
• pp.217-223
• /
• 2023

In this work, the preparation and its oil adsorption behavior of polyacrylonitrile-based carbon nanofiber sponge were investigated. The prepared carbon sponges showed excellent selective oil adsorption in the mixture of water and oil, and the adsorption capacity of reused carbon nanofiber sponge was also investigated. Further, carbon nanofiber sponge adsorbent with internally structured channel showed fast oil adsorption behavior due to a capillary phenomenon. After use, sponge adsorbent was heat-treated at 800℃ under N² and studied the possibility of a sensor for electrochemical detection of 4-aminophenol.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.264-270
• /
• 2016

This Study is to into fuel using a torrefation reaction to food waste. When the fuel of only food waste alone, fuel value is was performed at a ratio of sewage sludge constant attempts to prevent low. Mixing ratios of food waste and sewage sludge, 10:0, 8:2, 6:4, 5:5. Regardless mixing ratio, it was possible to confirm that decreases the moisture content of 10% or less at a reaction temperature of $240^{\circ}C$ or higher. As the ratio of the reaction temperature and the sewage sludge is high, the fixed carbon content is increased. It was measured at up to 36%(mixing ratios6:4, reaction temperature $270^{\circ}C$) from the initial 1.1%. From the reaction temperature $240^{\circ}C$ satisfied with 3000Kcal/Kg or more is a SRF criteria shows the calorific value. It was possible to obtain a heating value that is increased from the raw sample approximately sextuple. As reaction temperature is heightened, Van krevelen Diagram moved to the range of Lignite range. It was possible to obtain high fuel ratio and 5,500Kcal/kg or less of a combustility index as the sewage sludge mixing ratio becomes high. Increase the fixed carbon content, than those food waste alone solid fuel into and improved fuel costs, it is necessary to ensure that the quality of the fuel is improved.

• Clean Technology
• /
• v.28 no.1
• /
• pp.46-53
• /
• 2022

The agglomeration characteristics of coal and silica sand were investigated under various conditions using mixed samples consisting of coal, silica sand, and potassium hydroxide, which is an agglomeration accelerator. The samples were prepared by either physically mixing or using aqueous solutions. The experiments using the physically mixed powder samples were performed with a two hour reaction time. The results showed that the number of aggregates generated increased as the reaction temperature and the total potassium content increased. The experiments using aqueous solutions were performed at 880 ℃, which is the operating temperature of a fluidized bed boiler, and at 980 ℃, which assumes a local hot spot. The amount of agglomeration generated as the reaction time increased and the total potassium content increased was identified. In the experiment performed at 880 ℃, the amount of aggregate generated clearly increased with the reaction time, and in the experiment performed at 980 ℃, assuming a local hot spot, a large amount of aggregate was generated in a relatively short time. The aggregates became harder as the potassium content increased. When the total potassium content was less than 1.37 wt.%, the aggregates were weak at both temperatures and collapsed even with a slight impact. Additionally, the surface characteristics of the silica sand and ash aggregates were observed by SEM-EDS analysis. The analysis revealed a large amount of potassium at the bonding sites. This result indicates that there is a high possibility of aggregation in the form of a eutectic compound when the alkali component is increased.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.89-89
• /
• 2001

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1994.10b
• /
• pp.19-20
• /
• 1994

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.129.1-129.1
• /
• 2011

최근 급격한 경제성장과 고도 산업사회로의 전환에 따라 에너지 수요가 크게 증가하고 있다. 이에 따라 석유, 가스 등 화석에너지의 소비량과 온실가스 배출량이 급격히 늘어나고 있는 실정이다. 따라서 화석에너지의 소비와 온실가스 배출을 저감시키기 위해 친환경적인 에너지를 이용하기 위한 많은 연구가 이루어지고 있다. 이와 같은 노력 중 하나가 바로 태양열에너지를 이용하는 방법이다. 태양열에너지는 자원 고갈의 우려가 없고, 에너지의 이용 과정에서 공해 물질을 배출하지 않아 대체 에너지원으로 각광을 받고 있다. 하지만 에너지 밀도가 낮고 에너지의 공급이 기상조건에 따라 큰 영향을 받으므로 태양열에너지를 이용하기 위해서는 효율적인 집열시스템이 필요하다. 따라서 본 연구에서는 우수한 열적특성을 가진 탄소나노유체를 히트파이프 작동유체에 적용하여, 태양열 집열기의 효율을 향상시키기 위해 탄소나노유체의 열전도도 및 점도특성을 비교분석하였다. 나노유체는 에탄올에 산화 다중벽 탄소나노튜브(Oxidized Multi-walled Carbon Nanotubes, OMWCNTs)를 혼합하고, 초음파 분산하여 제조하였다. 에탄올-산화탄소나노유체의 열전도도와 점도는 저온($10^{\circ}C$), 상온($25^{\circ}C$), 고온($70^{\circ}C$)에서 측정하여 비교분석하였으며, 열전도도는 전기 전도성 유체의 비정상 열선법(Transient Hot-wire Method)을 이용하여 측정하였고, 점도는 회전형 디지털 점도계를 이용하였다. 실험 결과 0.1 vol%의 에탄올-산화탄소나노유체의 열전도도는 기본 유체 대비 33.72%($10^{\circ}C$), 33.14%($25^{\circ}C$), 32.26%($70^{\circ}C$)가 향상되었으며, 점도 또한 기본유체보다 크게 증가하지 않아 히트파이프 작동유체로서 우수한 효과를 나타낼 수 있음을 확인하였다. 본 연구의 결과는 태양열 집열기 히트파이프의 효율 향상을 위한 기초자료로써 유용한 정보를 제공할 것이라 판단된다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.05a
• /
• pp.102-102
• /
• 1999

6Mo급 슈퍼 스테인리스강의 내식성은 여러 환경에서 여러 가지의 부식 시험 방법을 통해서 확띤되어 왔다. 이 합금이 보이는 탁월한 내식성 때문에 해수 설비 계통,정유 설비,원자력 발전소의 열교환기 등의 중요 재료로서 그 사용 용도가 급격히 증가하고 있다. 그런데 방사선의 영향을 받게 되는 설비에 금속 재료가 사용되는 경우,특히 경수로의 노내 구조물, 액체 금속로의 열교환기, 핵융합로의 제1벽 재료 등 에서는 합금 원소가 방사성 환경에 의하여 제거되는 현상이 나타난다. 따라서 본 연구에서는 이러한 상황을 미리 재료 제조 차원에서 모사하여 탄소량과 질소량의 함량 을 달리 한 6Mo급 슈퍼 스테인리스강을 제조하여 미세 조직, 기계적 성질 및 부식 특성의 변화에 대하여 연구하였다. 진공 고주파 유도 용해로를 이용하여 탄소량과 질소량이 각기 변화된 슈퍼 스테인리스강을 용해 한 뒤 아르곤 가스 분위기에서 $1180^{\circ}C$로 soaking하고 열간 압연을 행하였다. 열간 압연으로 표변에 생성된 산화 스케일을 불산과 질산의 혼합 용액으로 제거한 뒤 냉간 압연을 행하였다. 이 냉연 판재에 대하여 $1150^{\circ}C$로 소둔하여 각 실험에 사용하였다. 광학 현미경을 이용하여 미세 조직의 변화를 관찰하였으며, 상온과 고온($520^{\circ}C$)에서 인장 시험을 행하였으며, 경도 측정을 행하였다. 또한 양극 분극 시험과 비등 질산 침지 시험 및 비등 40% NaOH 용액에서의 일정 연신율 시험을 행하 였다. 탄소 함량이 증가할수록 항복 강도 및 인장 강도는 증가하고 있으며 연신율은 감 소하는 일반적인 경향을 보였으며 비등 질산 시험에서는 탄소량에 관계없이 매우 우수한 내식성을 쁘였다. 또한 비등 상태의 40% NaOH 용액에서의 응력 부식 균열 시험 결과, 탄소량이 증가할수록 부식 저항성이 증가하고 있는 것으로 평가되었다. 한 편 질소량이 증까할수록 결정립이 미세화되었으며 경도값이 상승하였다. 이들 합금 에 대한 양극 분극 시험 결과, 질소량의 변화가 탄소량의 변화보다 내식성에 큰 영향 을 미치고 있음을 알 수 있었다.

• Journal of Hydrogen and New Energy
• /
• v.34 no.2
• /
• pp.149-154
• /
• 2023

In the Fourth Industrial Revolution, hydrogen energy is in the spotlight. There is a difficulty in commercialization due to the lack of hydrogen infrastructure. Therefore, a lot of hydrogen should be imported and a method using ammonia is the most useful. In this study, using the mixed gas of hydrogen and nitrogen generated when ammonia is decomposed, the hydrogen separation performance is to be tested. Hydrogen was separated using an electrochemical hydrogen compressor based on a fuel cell and the experiment was conducted by changing the ratio of hydrogen and nitrogen. In addition, the performance was also compared by the difference both the pressure and the membrane.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2065-2070
• /
• 2010

The diluted PMMA treated $SiO_2$ films as an passivation materials for semiconductor devices was researched by using the FTIR spectra. The diluted PMMA solution with various ratios changed the surface of $SiO_2$ film as the hydrophilic, hydrophobic or hybrid type properties. The sample 7 with little carbon content showed dramatically the chemical variation by the FTIR spectra analysis. Beacuse the little carbon with electrons decreased the polarity and surface energy on the $SiO_2$ film, and then became a stable bonding structure and decreased the leakage current. The FTIR spectra can define the detail variation due to the chemical reaction on the organic thin film, and help to research the characteristic of the organic materials.

• Journal of the Korean Ceramic Society
• /
• v.38 no.12
• /
• pp.1110-1114
• /
• 2001

We report the mechanochemical effect of an Fe(NO$_3$)$_3$$.$9H$_2$O-Al(OH)$_3$sample as catalytic precursor mixed-ground by mixer mill on the growth of carbon nanotubes using thermal chemical vapor deposition method. From and TEM observations, carbon products grown on a ground catalyst were more uniform than those grown on an unground catalyst and most of them were identified as carbon nanobubes. Also, it was observed that field emission properties of products on ground catalyst were superior to those of unground catalyst.