• Title/Summary/Keyword: 탄소수

Search Result 4,591, Processing Time 0.034 seconds

Characteristics of Electrode Potential and AC Impendance of Perchlorate Ion-Selective Electrodes Based on Quaternary Phosphonium Salts in PVC Membranes (제4급 인산염을 이용한 과염소산 이온선택성 PVC막 전극의 전극전위와 AC 임피던스 특성)

  • 안형환
    • Membrane Journal
    • /
    • v.9 no.4
    • /
    • pp.230-239
    • /
    • 1999
  • Perchlorate ion-selective electrodes in PVC membranes that respond linearly to concentration 106 M were developed by incorporating the quaternary phosphonium salts as a canier. The effects of the chemical structure, the contents of canier, the kind of plasticizer and the membrane thickness on electrode characteristics such as the electrode slope, the linear respone range and the detection limit were studied. With this results, the detectable pH range, selectivity coefficients and AC impedance characteristics were compared and investigated. The perchlorate ion substituents of the quaternary phosphonium salts like tetraoctylphosphonium perchlorate (TOPP) , tetraphenylphosphonium perchlorate(TPPP), and tetrabutylphosphonium perchlorate(TBPP) as a canier were used. The electrode characteristics were better in the ascending order of TBPP < TPPP < TOPP, with the increase of carbon chain length of the alkyl group. Dioctylsebacate(OOS) was best as a plasticizer, the canier contents were better with 11.76 wt% and the optimum membrane thickness was 0.19 mm. Under the above condition, the electrode slope was 56.58 mV/$^P{ClO}_4$,the linear response range was $10^{-1}$\times$10^{-6}$ M, the detection limit was 9.66 x $10^{-7}$ M. The performance of electrode was better than Orion electrode. The electrode potential was stable within the pH range from 3 to 11. The order of the selectivity coefficients for the perchlorate ion was sol < F < Br < 1. With the result of impedance spectrum, it was found that the equivalent circuit for the electrode could be expressed by a series combination of solution resistance, parallel circuit consisting of the double layer capacitance and bulk resistance and Warburg impedance. And solution resistance was almost not appeared and Warburg impedance was highly appeared by diffusion. Then Warburg coefficient was 1.32$\times$$10^74 $\Omega$ $\cdot$ ${cm}^2/s^{1/2}$.

  • PDF

Optimization of Culture Conditions for D-Tagatose Production from D-Galactose by Enterobacter agglomerans. (Entrobacter agglomerans에 의한 D-Galactose로부터 D-Tagatose 생산조건의 최적화)

  • 오덕근;노회진;김상용;노봉수
    • Microbiology and Biotechnology Letters
    • /
    • v.26 no.3
    • /
    • pp.250-256
    • /
    • 1998
  • D-Tagatose production from D-galactose was investigated using 35 type strains of American Culture Type Collection (ATCC) and Korean Collection for Type Cultures (KCTC) which have potential to produce D-tagatose. Enterobacter agglomerans ATCC 27987 was selected as a D-tagatose producing strain due to its short fermentation time and high production of D-tagatose. Optimization of the culture conditions for D-tagatose production by E. agglomerans ATCC 27987 was performed. Among various carbon sources, D-galactose was the most effective carbon source for D-tagatose production. As the D-galactose concentration was increased, cell growth and D-tagatose production increased. Effect of nitrogen sources on D-tagatose production was studied. Of inorganic nitrogen sources, ammonium sulfate was effective one for D-tagatose production and yeast extract was the most suitable organic nitrogen nutrient. The concentrations of inorganic compounds such as KH$_2$PO$_4$, K$_2$HPO$_4$, and MgSO$_4$$.$7H$_2$O were also optimized for D-tagatose production. The optimal medium was determined to contain D-galactose of 20 g/l, yeast extract of 5.0 g/l, (NH$_4$)$_2$SO$_4$ of 2.0 g/l, KH$_2$PO$_4$ of 5.0 g/l, K$_2$HPO of 5.0 g/l, and MgSO$_4$$.$7H$_2$O of 5 mg/l. The optimal environmental conditions in a 250-$m\ell$ flask were found to be pH of 6.0, temperature of 30$^{\circ}C$, and agitation speed of 150 rpm. D-tagatose of 0.41 g/l could be obtained in 24 h from 20 g/l D-galactose at the optimal culture condition without induction and cell concentration.

  • PDF

Electrochemical Characterization of Anti-Corrosion Film Coated Metal Conditioner Surfaces for Tungsten CMP Applications (텅스텐 화학적-기계적 연마 공정에서 부식방지막이 증착된 금속 컨디셔너 표면의 전기화학적 특성평가)

  • Cho, Byoung-Jun;Kwon, Tae-Young;Kim, Hyuk-Min;Venkatesh, Prasanna;Park, Moon-Seok;Park, Jin-Goo
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.19 no.1
    • /
    • pp.61-66
    • /
    • 2012
  • Chemical Mechanical Planarization (CMP) is a polishing process used in the microelectronic fabrication industries to achieve a globally planar wafer surface for the manufacturing of integrated circuits. Pad conditioning plays an important role in the CMP process to maintain a material removal rate (MRR) and its uniformity. For metal CMP process, highly acidic slurry containing strong oxidizer is being used. It would affect the conditioner surface which normally made of metal such as Nickel and its alloy. If conditioner surface is corroded, diamonds on the conditioner surface would be fallen out from the surface. Because of this phenomenon, not only life time of conditioners is decreased, but also more scratches are generated. To protect the conditioners from corrosion, thin organic film deposition on the metal surface is suggested without requiring current conditioner manufacturing process. To prepare the anti-corrosion film on metal conditioner surface, vapor SAM (self-assembled monolayer) and FC (Fluorocarbon) -CVD (SRN-504, Sorona, Korea) films were prepared on both nickel and nickel alloy surfaces. Vapor SAM method was used for SAM deposition using both Dodecanethiol (DT) and Perfluoroctyltrichloro silane (FOTS). FC films were prepared in different thickness of 10 nm, 50 nm and 100 nm on conditioner surfaces. Electrochemical analysis such as potentiodynamic polarization and impedance, and contact angle measurements were carried out to evaluate the coating characteristics. Impedance data was analyzed by an electrical equivalent circuit model. The observed contact angle is higher than 90o after thin film deposition, which confirms that the coatings deposited on the surfaces are densely packed. The results of potentiodynamic polarization and the impedance show that modified surfaces have better performance than bare metal surfaces which could be applied to increase the life time and reliability of conditioner during W CMP.

Protective Effects of Extracts of Hovenia dulcis Thunb on Hepatotoxicity in Carbon Tetrachloride Intoxicated Rats (지구자나무 추출물이 사염화탄소로 유발된 흰쥐의 간손상에 미치는 영향)

  • 김옥경
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.30 no.6
    • /
    • pp.1260-1265
    • /
    • 2001
  • This study was performed to investigate the protective effects of Hovenia dulcis Thunb on hepatotoxicity in carbon tetrachloride-intoxicated rats. Male Sprague-Dawley rats (220~240 g) were used as experimental groups, which were divided into 7 groups; Control group, $CCl_4$-treated group, hexane fraction pretreated and $CCl_4$-treated group, chloroform fraction pretreated and $CCl_4$-treated group, ethylacetate fraction pretreated and $CCl_4$-treated group, butanol fraction pretreated and $CCl_4$-treated group, $H_2O$ fraction pretreated and $CCl_4$-treated group. After 6 days, the activities of aminotransferase, contents of cholesterol, TG and hepatic lipid peroxide content in chloroform fraction pretreated and $CCl_4$-treated group were significantly decreased (p<0.05) compared to the only $CCl_4$-treated group. The content of glutathione and activities of GST in chloroform fraction pretreated and $CCl_4$-treated group were also significantly increased (p<0.05) compared to the only $CCl_4$-treated group. In addition, activities of SOD, catalase and GSH-Px in chloroform fraction pretreated and $CCl_4$-treated group were significantly decreased (p<0.05) compared to the only $CCl_4$-treated group. These results indicated that the chloroform fraction of Hovenia dulcis Thunb methanol extract showed hepatoprotective effect in carbon tetrachloride-intoxicated rats.

  • PDF

Study on Meat Tenderizer -Part II. Tenderizing ability of Enzyme from Asp. oryzae- (Meat Tenderizer 제조에 관한 연구 -제2보 Asp. oryzae 생산 protease의 연육효과-)

  • Lee, Jung-Hee;Kim, Kun-Wha;Yu, Ju-Hyun;Yang, Ryung
    • Korean Journal of Food Science and Technology
    • /
    • v.7 no.4
    • /
    • pp.229-237
    • /
    • 1975
  • An attempt was made to utilize the enzyme produced by Asp. oryzae as meat tenderizer. The production, purification, and various properties of proteinase produced by Asp. oryzae were investigated. Results obtained are as follow; 1. A strain which had the highest proteolytic activity was selected among 9 Aspergillus species. 2. Culture medium consisted of wheat bran 10g, 2% glucose, 0.03% urea and 0.1% $MgSO_4$ (pH 6.5). Mold was incubated at $30^{\circ}C$ for 3 days. 3. Enzyme extract from culture medium were fractionated with ammonium sulfate and purified by Sephadex G-75 column chromatography. 4. When pH of reaction mixture was controlled, maximal activity of proteinase by Asp. oryzae was obtained at pH 3, pH 6.6, $8.4{\sim}8.5$ and pH 10.0 to 10.5. Those results were interpreted to show that enzyme consists of acid proteinase, neutral proteinase and alkaline proteinase. Enzyme was stable at pH 6 to 10. 5. Opt. temperature for proteinase activity was $50^{\circ}C$, but enzyme was stable up to $40^{\circ}C$. 6. The proteinase was inhibited by $Ag^+$. It was also inhibited by EDTA. 7. When myofibrillar proteins were treated by proteinase from Asp. oryzae, ATPase activities of myofibrillar proteins changed remarkably. Accordingly, it was concluded that proteinase produced by Asp. oryzae were able to be used as meat tenderizer.

  • PDF

Growth and Water Use Efficiency of Major Tree Species for Rehabilitation and the Impacts of Planting Trees on Microclimate Condition in Central Dry Zone of Myanmar (미얀마 건조지에서 주요 조림 수종의 생장과 수분이용효율 특성 및 조림이 건조지의 미세기상변화에 미치는 영향)

  • Park, Go Eun;Kim, Chan Beom;An, Jiae;Thang, Tluang Hmung;Maung, Wai Phyoe;Wai, Khaing Hsu;Kwon, Jino;Park, Chanwoo
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.18 no.4
    • /
    • pp.327-336
    • /
    • 2016
  • The Bagan, the central part of Myanmar, is dry zone where the mean annual precipitation is less than 600 mm for the last ten years. Forest in this region has been degraded due to biotic and abiotic disturbances. While there have been various efforts to rehabilitate the degraded area, the information on growth and physiological characteristics of planting species and the impacts of planting trees in the region still lacks. Therefore, this study was conducted to determine the growth and physiological water use efficiency characteristics of five species (Azadirachta indica A. Juss., Acacia catechu Willd., Eucalyptus camaldulensis Dehn., Acacia leucophloea (Roxb.) Willd. and Albizia lebbek (L.) Willd.) which are utilized as rehabilitation species in the dry zone and to identify the impacts of tree planting on microclimate change in dry zone. The growth and the foliar carbon isotope composition of seedlings and the above mentioned five species planted in 2005 were measured. And from February 2015 to January 2016, microclimatic factors air temperature and relative humidity at 60 cm and 2 m above soil, soil temperature, soil water contents and precipitation were measured at every 30-minute interval from the two weather stations installed in the plantation located in Ngalinpoke Mt. Range. One was established in the center of A. indica plantation, and the other was in the barren land fully exposed to the sunlight. Among the five species, A. indica and A. lebbek which showed higher water use efficiency could be recommended as rehabilitation species in dry zone. Planting trees in the dry area was shown to affect the change of microclimate with shading effects, declining temperature of the land surface and aridity of the air, and to contribute to conserving more water in soil by preventing direct evaporation and containing more water with fine roots of trees.

Characterization of Sun Spangle Formation in the Transparent Baltic Amber by Heat Treatment (열처리를 통한 발틱 호박의 Sun spangle생성에 관한 연구)

  • Chung, Hyo-Jin;Seo, Jin-Gyo;Park, Jong-Wan
    • Journal of the Mineralogical Society of Korea
    • /
    • v.22 no.4
    • /
    • pp.395-405
    • /
    • 2009
  • The maturity of amber matrix and inclusion was studied to explore the effect of heat treatment on the formation of the sun spangle in the transparent Baltic amber from Gdansk, Poland. Optical microscope revealed two types of inclusions in the original amber samples. The inclusions in the amber which had sun spangle were dramatically expanded by the heat treatment, comparing to those without sun spangle which contains fissure and shows different refractive index. The amber sample which didn't show sun spangle after the heat treatment showed a strong carbon related peak in TOF-SIMS spectra and weak oxygen related peak. it means that the maturity of this amber sample is comparatively higher than the one with spangle. The two amber samples show similar IR spectra before the heat treatment. However, the amber which had sun spangle exhibited an additional 1019 $cm^{-1}$ absorption peak and a more intense 887 $cm^{-1}$ peak. The different chemical compositions between the two types of amber is believed to be due to the different absorption spectra between 1000~600 $cm^{-1}$. According to the study of DSC analysis, the two samples show different DSC profiles. Although they have the same geological origin, their geological ages are different and have different chemical compositions. Thus, they exhibited different behavior after the heat treatment. The formation of sun spangle seemed to depend on the difference in the heat expansion rate of amber matrix with different maturity and chemical compositions.

Decomposition Characteristics of Non-Degradable Liquid Waste under High Temperature and High Pressure Conditions (고온 고압 조건에서의 난분해성 액상폐기물 분해 특성)

  • Lee, Gang-Woo;Shon, Byung-Hyun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.8 no.6
    • /
    • pp.1572-1578
    • /
    • 2007
  • The specified wastes consist of waste acid, waste alkali, waste oil, waste organic solvent, waste resin, dust, sludge, infectious waste, and others. Among these specified wastes, a great portion is liquid phase wastes. The purpose of this study is to develop the high temperature and high pressure (HTHP) treatment system for decomposition of the liquid phase specified waste (LPSW). For this, we analyzed the physical and chemical properties of the LPSW such as density, proximate analysis, ultimate analysis, heating values, and designed 0.3 ton/day HTHP treatment system. The LPSW tested in this experiment were prepared by adding TCE(trichloroethylene) and toluene to liquid phase waste which was brought into the commercial waste treatment company. The average density of waste oil (25 samples), waste resin (5 samples), and waste solvent (12 samples) was 0.99 g/mL, 0.91 g/mL, and 0.93 g/mL, respectively. And the average lower heating value of waste oil, waste resin, and waste solvent was 8,294 kcal/kg, 5,809 kcal/kg, and 7,462 kcal/kg, respectively. The DRE (Destruction & Removal Efficiency) of TCE and toluene were 99.95% and 99.73% at atmospheric pressure conditions and that were 99.99% and 99.82% at pressurized conditions, respectively. These results showed that TCE/toluene mixtures were properly decomposed over about 99.73% of DRE by the HTHP treatment system and pressurized conditions were more effective to destroy those pollutants than atmospheric pressure conditions. Also these systems could be directly applied to industries which try to treat the liquid phase specified waste within the regulation limit.

  • PDF

The Sr and Pb Isotopic and Geochemical Properties of the Atmospheric Bulk Deposition of Jeonju, Gunsan, and Namweon Areas (전주, 군산, 남원지역 강수의 Sr, Pb동위원소 지화학)

  • Jeon Seo-Ryeong;Chung Jae-il
    • Economic and Environmental Geology
    • /
    • v.38 no.4 s.173
    • /
    • pp.463-479
    • /
    • 2005
  • The Sr and Pb isotopic ratios and chemical composition were measured for atmospheric bulk deposition samples collected in the Jeonju, Gunsan and Namweon areas over a period of one year. Acidity of deposition ranged pH $4\~7$ with little higher in dry season, and around pH 5.0 in rainy season. The EC and TDS of rainy season was low showing dilution effect, and increased during dry season. Sulfate $(SO_4)\;and\;NO_3$ are atmospheric aerosols largely of anthropogenic origin in winter. Sodium was concentrated in winter deposition, Ca was concentrated in spring to summer deposition. Namweon has lower EC and TDS than those of other, and Jeonju has higher. Namweon was concentrated in $HCO_3$ and Cunsan was concentrated in Cl. Aluminium, Cu, and Zn show good correlation index with TDS, indicating of their origin atmospheric. $^{87}Sr/^{86}Sr$ ratios of bulk deposition ranged from 0.7109 to 0.7128. The isotopic variations are correlated with mixing of isotopic compositions of local soils, road deposit and biogenic aerosol. In order to constrain further the origin of aerosols in rainwater, it will be necessary to collect additional Sr isotopic data for aerosols. Lead isotope ratios for all areas were similar and belonged to Pb isotope ratios of Seoul's aerosols, but little different with Beijing's aerosols. It showing that Pb in the Korea mainly derived from the gasoline combustion, not exclusively from the Beijing.

Seasonal Changes of Chemical Compositions in Leaves, Shoot and Berries of ‘Delaware’Seedless Grapes induced by Gibberellic Acid (Delaware 포도의 무핵재배에서 엽${\cdot}$신초${\cdot}$과립의 생장 및 성숙에 따른 화학성분의 변화)

  • 최수주
    • Journal of Life Science
    • /
    • v.7 no.2
    • /
    • pp.142-148
    • /
    • 1997
  • This study was carried out to clarify seasonal changes of chemical compositions and their interrelation in leaves, shoots and berries treated with gibberellin($GA$_{3}$)for seedless grapes in ‘Delaware’grapevines. the clusters were dipped twice with 100ppm $GA_{3}$: 10 days befor and after the full bloom. The reaults obtained as follows; 1. Cumulative growth curve of berry fresh weight showed a double sigmoid curve and the characteristics of three distinctive growth stages(I, II, III)were weekened with $GA_{3}$ treatment. 2. while the contents of ash, total carbon, total nitrogen and total carbohydratd had little reation with edvelopment and ripeness of berries, those of total sugar and starch jad close relation, viz., they decreased with enlargement and maturity fo berries, but increased rapidly after harvest in leaves and shoots. Especially, total sugars in leaves and shoots decreased coincidently with starch-increasing in shoots at November. 3. The contents of total soluble solid and reducing sugar in berries increased rapidly at growth stage III, but those of total titratable acidity and organic acid decreased coincidently with sugar-increasing. 4. The berry-hardness increased until growth stage I, and then stagnated until gtowth stage II, and then increased rapidly at growth stage III. pH of berry-juice decreased until growth stageII, afterwards increased at growth stage III. 5. By correlation and path coefficient analysis between qualitative characters and the ratio of total soluble solid to titratable acidity($^{\circ}$Brix/Acidity), total correlation coefficients were all highly significant. Of these characters, pH and viscosity of berry-juice were positive, but brightness and hardness of berry, negative. The direct effect of pH on $^{\circ}$Brix/Acidity ratio, p4y=0.9090, was large positively and those of berry-hardness and juice-viscosity, p1y=0, 5938, median and, p2y=0, 3550, small, respectively. Direct effect of brightness was negatively small.

  • PDF