• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.313-318
• /
• 1998

Using direct headspace sampling (DHS) method, volatile terpenoid content was measured according to carrot cultured areas and various portions of carrot. In comparison of volatile terpenoid content in xylem and phloem of carrot, every volatile terpenoid was distributed highly in the xylem rather than the phloem of carrot. The carrot was divided into three different sections; upper (crown), middle (midsection), and lower part (tip), and the volatile terpenoids were measured. The content of ${\alpha}-pinene,\;{\beta}-pinene,\;{\beta}-myrcene,\;and\;{\gamma}-terpinene$ tended to be distributed highly in the upper part rather than the lower part, whereas the content of terpinolene and total terpenoids tended to be high in the lower part. In comparison of volatile terpenoid content according to the carrot cultured areas, volatile terpenoid content of carrot cultured in Cheju island was higher than Yangsan and Haenam areas. In case of total terpenoids, the carrot clutivars cultured in Cheju island contained $1.6{\sim}2.3\;times$ higher than those of Yangsan, and $1.5{\sim}2.4\;times$ higher than Haenam. In order to investigate the above results, we sampled out soils from the carrot fields and measured physical and chemical characteristics of the soils. The pH did not show much difference in the three areas. However the organic carbon, total nitrogen, cation exchange capacity, and total exchangeable cation in soil from Cheju were $2.4{\sim}3.0\;times$ higher than Yangsan and $3.9{\sim}7.1\;times$ higher than Haenam. The physical characteristics of the soils was investigated. The soil from Cheju island was found to be loam; Yangsan, sandy loam, and Haenam, clay loam.

• KDI Journal of Economic Policy
• /
• v.34 no.2
• /
• pp.55-93
• /
• 2012

In Korea, energy policies are actualized through various energy-related plans. Recently, however, as high-ranking plans, which are very vision-oriented, continually set higher sector-by-sector goals, subordinate action plans, which require consistency, encounter distortions in their establishment process. Also, each subordinate action plan reveals limitations in terms of securing flexibility of the plan in responding to uncertainties of the future. These problems pose potential risks such as causing huge social costs. In this regard, with an aim to provide empirical evidence for discussions on improving the procedure for developing and executing Korea's energy plans, this study mainly analyzes the Basic Plan on Electricity Demand and Supply-one of the most important subordinate action plans-in order to explain the problems of the Basic Plan in a logical manner, and potential problems that could occur in the process of sustaining consistency between the Basic Plan and its higher-ranking plans. Further, this paper estimates the scale of social costs caused by those problems assuming realistic conditions. According to the result, in the case of where maximum electric power is estimated to be 7% (15%) less than the actual amount in the Basic Plan on Electricity Demand and Supply, the annual generation cost will rise by 286 billion won and (1.2 trillion won) in 2020. Such social costs are found to occur even when establishing and executing the Basic plan according to the target goal set by its higher-ranking plan, the National Energy Master Plan. In addition, when another higher-ranking GHG reduction master plan requires the electricity sector to reduce emissions by additional 5% in the GHG emissions from the right mix in electricity generation with 'zero' cost of carbon emission, the annual generation cost will rise by approximately 915 billion won in 2020. On the other hand, the analysis finds that since economic feasibility of electric powers in Korea varies significantly depending on their type, Korea is expected to face very small potential social costs caused by uncertainties over the future price of carbon dioxide in the process of establishing the Basic Plan.

• Microbiology and Biotechnology Letters
• /
• v.40 no.3
• /
• pp.220-225
• /
• 2012

In order to investigate the ethanol fermentation properties of alcohol yeasts a laboratorial strain (CEN.PK2-1D) and two industrial alcohol yeasts (JHS100 and JHS200) of Saccharomyces cerevisiae were cultured in a pure YP medium with 300 g/L glucose and cassava hydrolysate. Spot assay and cell viability tests showed that both the JHS100 and JHS200 strains exhibited higher ethanol tolerance than the CEN.PK2-1D strain. The JHS100 strain demonstrated the highest cell growth, glucose consumption and ethanol production. In particular, an anaerobic batch fermentation of the JHS100 strain using cassava hydrolysate with 250 g/L glucose resulted in a 106.1 g/L ethanol concentration, 0.42 g/g ethanol yield and 3.15 g/L-hr ethanol productivity, which were 53%, 13%, 53% higher than the corresponding values for the CEN.PK2-1D strain. By changing the pure YP medium to cassava hydrolysate, 19% and 17% decreases in ethanol yield and productivity for the CEN.PK2-1D strain were observed, whereas the cultures of the JHS100 and JHS200 stains showed similar ethanol productivities and only an 8% decrease in ethanol yield. Furthermore, the JHS100 and JHS200 stains produced lower levels of glycerol and acetate byproducts than the CEN.PK2-1D strain. Consequently, the outstanding ethanol fermentation performance of the industrial strains might be owing to rapid cell growth, high ethanol tolerance, low nitrogen requirements and the low formation of by-products.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.4
• /
• pp.64-74
• /
• 2010

The study is based on an urban park design that is designed in consideration of the characteristics of Uijeongbu City, applied with adequate functions for the environment and showcasing the unique scenery in relation to the relocation of the US Air Force Camp Falling Water. The bases of the design are: the reasonable convergence of the square and park in consideration of the site characteristics; the application of an urban context as the park is located near a station; and the realization of an eco-friendly space. This study is based on foundation research regarding a review of urban square patterns, particular items in planning in relation to modern urban parks and the adaptability of the park in the future. Regarding space usage, the design is applied with notable ideas that allow the space to make its own characteristics through voluntary user activity in conjunction with the environment that will allow the park to cope with changes in the future, as opposed to a space that users experience through pre-determined programs. Below are the focal points of the design. First, the park is designed as an empty space which may accommodate the urban structural context of and usage patterns for being a field of the city ecology that changes and develops, beyond a passively-created square pattern. Such open spaces have a continuity which allows it to adapt to the development of the city. In addition, the design facilitates spontaneous processes through changes in usage pattern and time. Second, the design includes the message that the park and the city, natural things and artificial things, must communicate and network with each other. Hence the park shall not be an isolated green island within the city, but is an open space accommodating the demands for open area from nearby commercial, public and residential facilities; the park shall include a field that can accommodate a variety of programs. Third, the park is designed to encourage the effect of direct and indirect practical education by reflecting a physical plan as well as interesting experience design methods to lower carbon emissions and to create and maintain an eco-friendly space, the basis of a zero-emissions city.

• Journal of Radiation Protection and Research
• /
• v.40 no.4
• /
• pp.223-230
• /
• 2015

The objective of this study is to identify the radionuclide distribution in public water by carrying out the analysis of artificial radionuclides($^{134}Cs$, $^{137}Cs$, $^{239+240}Pu$), natural radionuclide($^{210}Pb$) and TOC in the lake Euiam sediment in Chuncheon, South Korea. The $^{134}Cs$ concentration in all lake sediments showed below MDA values, and the $^{137}Cs$ concentration in lake sediment were ranged from MDA to $8.79Bq{\cdot}kg^{-1}-dry$. The $^{137}Cs$ concentrations in surface sediment were reported to be 2.4 to $4.2Bq{\cdot}kg^{-1}-dry$. The lowest concentration of $^{137}Cs$ was reported at St. 4 and the highest concentration was reported at St. 3, respectively. The $^{239+240}Pu$ concentration in lake sediment were ranged from 0.049 to $0.47Bq{\cdot}kg^{-1}-dry$. The lowest concentration was reported at St. 2 and the highest concentration was reported at St. 3. The correlation(r) between the $^{239+240}Pu$ concentration and $^{137}Cs$ concentration in lake sediment presented higher values (0.54 to 0.97) and this suggests the behavior and origin of $^{137}Cs$ is identical to the $^{239+240}Pu$ in the sediment. The $^{134}Cs$ concentration below MDA value and the $^{239+240}Pu/^{137}Cs$ ratio(mean value of 0.041) indicated that the artificial radionuclides in the sediment were originated from global fallout by the atmospheric testing of nuclear weapons conducted by former USSR and U.S.A, but not from the Fukushima Daiichi NPP accident. The sedimentation rate derived from $^{210}Pb$ age-dating method at St. 2 is calculated to be $0.31{\pm}0.06cm{\cdot}y^{-1}$. This value is similar to the value ($0.41{\pm}0.05cm{\cdot}y^{-1}$) estimated from the $^{137}Cs$ maximum peak produced from early 1960's. The content of TOC in lake Euiam sediments varied from 0.20 to 13.01%. While the highest correlation between TOC and $^{137}Cs$ concentration in the sediment were found at St. 1, the others presented the low correlation.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.1
• /
• pp.4-31
• /
• 2018

The Neolithic pottery excavated from the Jungsandong site has been classified into four types of pottery (I: feldspar type, II: mica type, III: talc type and IV: asbestos type) according to their mineral composition. These four types of potteries generally appear to have undergone incomplete firing, while the level of oxidation in the type I pottery objects, which have a relatively higher clay content, was found to be particularly low. The type III objects, which have a high talc content, are judged to have been somewhat slow in removing carbon because they contain saponite belonging to the smectite group. Of the four types of pottery, type IV showed the highest redness and the most uniform characteristics, thus indicating a good level of oxidation. In particular, fixed carbide (C; 33.7 wt.%) with a thickness of about 1mm, and originating from organic substances, was detected inside the walls of the type I pottery, while the deep radial cracks in the outer surfaces of the pottery are thought to have been caused by repeated thermal shocks. Given that all of the pottery except for the type I artifacts are considered to be have been made for storage purposes, those containing talc and tremolite are easy to done liquid storing vessels based on an analysis of their material characteristics. As for the type II relics, which are composed of various minerals and exhibit poor physical properties, they seem to have been used for simple storage purposes. As domestic talc and asbestos mines were concentrated in the areas of Gyeonggi, Gangwon, Chungbuk, and Chungnam, it seems likely that talc and tremolite were produced as contiguous minerals. Considering the distance between the remains in Jungsandong and these mines and their geographical distribution, there is a possibility - albeit somewhat slight - that these mines were developed for the mining of various minerals. Although ultramafic rock masses - such as serpentine capable of generating talc and tremolite - have not been found in the Jungsandong area, limestone and biotite granite containing mica schist have been identified in the northwestern part of Yeongjong Island, indicating that small rock masses might have formed there in the past. Therefore, it is judged necessary to accumulate data on pottery containing talc and tremolite, other than the remains in Jungsandong, and to investigate the rocks and soils in the surrounding area with greater precision. The firing temperatures of the pottery found at the Jungsandong site were interpreted by analyzing the stability ranges of the mineral composition of each type. As a result, they have been estimated to range from 550 to $800^{\circ}C$ for the type I artifacts, and from 550 to $700^{\circ}C$ for the type I, II and IV artifacts. However, these temperatures are not the only factors to have affected their physical properties and firing temperature, and the types, particle sizes, and firing time of the clay should all be taken into consideration.

• Journal of Mushroom
• /
• v.6 no.1
• /
• pp.13-19
• /
• 2008

This experiment was carried out to examine physiological and cultural characteristics of two strains ASI 19003, 'Poplar field-cap mushroom' Agrocybe cylindracea, and ASI 19016, 'Chaxingo' A. chaxingu, at the bottle cultivation which have very similar morphological characteristics in genus Agrocybe. There was significant difference between the physiological and cultural characteristics of ASI19003 and ASI19016. The optimal temperature for the hyphal growth was $28^{\circ}C$ in the strain ASI19003 and $30^{\circ}C$ in ASI19016. The optimal pH was not different in two strains and these strains grew well at pH 5.5~7.0. But the optimal pH in the submerged culture was 5.5 in ASI19003 and 5.0 in ASI19016. Especially, hyphal growth of the strain ASI19016 was very poor at pH 6.0~7.3. The optimal carbon source for the growth was lactose in the strain ASI19003 and fructose in ASI19016, and nitrate sources were asparagine, alanine, and glycine in the strain ASI19003, and ammonium tartrate, asparagine, glycine, and alanine in ASI19016, respectively. The periods of incubation and fruiting body formation in the bottle cultivation during the spring were 27 and 13 days in the strain ASI19003, 29 and 17 days in ASI19016. The yields of fruit body were 114 g per bottle (850 $m{\ell}$ volume) in the strain ASI19003 and 100 g in ASI19016. In the summer, the periods of hyphal incubation and fruiting body formation were 29 and 11 days in the strain ASI19003, 30 and 12 days in ASI19016. The color of the cap in the ASI19003 strain according to temperature increase during the fruit body development become more pale, but the strain ASI19016 kept dark color relative to ASI19003. The fruiting body formation of the strain ASI19016 was faster than that of ASI19003. Accordingly, the cultivation of A. cylindracea ASI19003 during the spring, fall and winter, and A. chaxingu ASI19016 during the summer can keep high quality and stable supply all year round of these mushrooms.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1311-1320
• /
• 2005

The purpose of this research is to survey characteristics of microbial community and the removal efficiency of organic materials for biological activated carbon in water treatment plant. Coal based activated carbon retained more attached bacterial biomass on the surface of the activated carbon than the other activated carbon with operating time and materials. The heterotrophic plate count(HPC), eubacteria(EUB) and 4,6-diamidino-2-phenylindole(DAPI) counts were ranged from $0.95{\times}10^7$ to $52.4{\times}10^7$ CFU/g, from $3.8{\times}10^8$ to $134.2{\times}10^8$ cells/g and from $7.0{\times}10^8$ to $250.2{\times}10^8$ cells/g, respectively. The biomass of EUB and DAPI appeared to be much more $10^2$ than HPC, which were increasing in bed volume of 20,000 at the stage of steady-state. The change of microbial community by analyzing fluorescent in situ hybridization(FISH) method with rRNA-targeted oligonucleotide probes, the dominant group was $\alpha$-proteobacteria($\alpha$ group) and high G+C content bacteria(HGC) the lowest distributing rate before reaching the bed volume of 20,000. After reaching the bed volume of 20,000, $\alpha$ group and other groups of bacteria became decreased, on the other hand, the proportion of both $\beta$-proteobacteria($\beta$ group) and $\gamma$-proteobacteri($\gamma$ group) were increasing. Coconut and wood based activated carbons had similar trend with coal based activated carbon, but the rate of $\alpha$ group on coal based activated carbon had gradually increased. Bacterial production with the operating period appeared highest in coal based activated carbon at the range of $1.2{\sim}3.4\;mg-C/m^3{\cdot}h$ while the coconut and wood based activated carbon were ranged from 1.1 to 2.6 $mg-C/m^3{\cdot}h$ and from 0.7 to 3.5 $mg-C/m^3{\cdot}h$ respectively. The removal efficiency of assimilable organic carbon(AOC) showed to be highly correlated with bacterial production. The correlation coefficient between removal efficiency of AOC and bacterial production were 0.679 at wood based activated carbon, 0.291 at coconut based activated carbon and 0.762 at coal based activated carbon, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1135-1146
• /
• 2015

This thesis aims to improve the safety of bicycle traffic for activating the use of bicycle, main means of non-powered and non-carbon transportation in order to cope with worldwide crisis such as climate change and energy depletion and to implement sustainable traffic system. In this regard, I analyzed the problem of bicycle roads currently installed and operated, and developed the bicycle accident forecasting model. Following are the processes for this. First, this study presented the current status of bicycle road in Korea as well as accident data, collect the data on bicycle traffic accidents generated throughout the country for recent 3 years (2009~2011) and analyzed the features of bicycle traffic accidents based on the data. Second, this study selected the variable affecting the number of bicycle accidents through accident feature analysis of bicycle accidents at Jeollanam-do, and developed accident forecast model using the multiple regression analysis of 'SPSS Statistics 21'. At this time, the number of accidents due to extension per road types (crossing, crosswalk, other single road) was used. To verify the accident forecast model deduced, this study used the data on bicycle accident generated in Gwangju, 2011, and compared the prediction value with actual number of accidents. As a result, it was found out that reliability of accident forecast model was secured through reconciling with actual number of cases except certain data. Third, this study carried out field survey on the bicycle road as well as questionnaire on satisfaction of bicycle road and use of bicycle for analysis of bicycle road problems, and presented safety improvement measures for the problems deduced as well as bicycle activation plans. This study is considered to serve as the fundamental data for planning and reorganizing of bicycle road in the future, and expected to improve safety of bicycle users and to promote activation of bicycle use as the means of transportation.

• Analytical Science and Technology
• /
• v.17 no.6
• /
• pp.496-513
• /
• 2004

This study was carried out to evaluate the performance of sampling and analytical methodology used for the measurement of toxic volatile organic compounds (VOCs) in the ambient air. VOCs were determined by the adsorbent tube sampling and automatic thermal desorption coupled with GC/MSD analysis. Target analytes were 33 compounds including major aromatic compounds such as BTEX, and halogenated compounds. The methodology was investigated with a wide range of different adsorbents which are commercially available and have been frequently adopted for the VOC measurement. A total of 10 adsorbents were tested in this study: 6 carbon-based adsorbents such as Carbotrap, Carbopack B, Carbosieve S-III, Carboxen 1000, Carbotrap C, Activated Charcoal; and 4 polymer-based adsorbents including Tenax, Porapak Q, Chromosorb 102, and Chromosorb 106. The sampling performance was evaluated with respect to the sampling capacity of VOCs with single-adsorbent and multiple-adsorbents methods for standard samples and field samples. As a result, the best adsorbents for single-adsorbent method in the sampling of toxic organic compounds (including benzene, toluene, xylenes etc.) appeared to be Carbotrap, Carbopack B and Tenax TA. On the other hand, Chromosorb 102, Chromosorb 106 and Porapak Q were found to be unsuitable adsorbents for VOC measurement based on thermal desorption method. Multi-adsorbent packings were evaluated with 4 carbon-based adsorbents, which classified by 3 combination sets of double adsorbents and 2 combination sets of triple adsorbents. The results indicated that the most suitable combination for toixc VOC measurements is Carbotrap C with Carbotrap. Multi-sorbents tubes packed with a strong adsorbent such as Carbosieve S-III or Carboxen 1000 were found to be relatively unsuitable for several compounds, not only owing to the effect of migration of adsorbed compounds from weaker adsorbent to stronger adsorbent, but to hydrophobic nature of the adsorbents. Therefore, it should be addressed that selection of a proper adsorbent (or combination of multi sorbents) is extremely important to obtain reliable data for the concentrations of toxic VOCs in indoor and outdoor environments.