• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.183-183
• /
• 2022

최근 몇 년 동안 기후변화에 대응하기 위한 탄소중립 혹은 저탄소 운영의 중요성이 강조되어왔다. 상수도 관망은 직접적인 탄소 배출 시설물은 아니지만, 상수도 관망의 운영 그리고 구성요소의 제조부터 폐기까지의 전 생애주기 동안 막대한 양의 에너지를 사용하는데, 이러한 에너지의사용이 탄소 배출에 간접적인 영향을 주는 것으로 알려져 있다. 특히 수자원공사에 따르면, '17년 기준 수도사업 관련 전기 사용에 따른 간접 배출이 70만tCO2eq에 이르는 것으로 보고되고 있어, 에너지의 효율적인 운영 및 자산관리 체계의 필요성이 커지고 있는 실정이다. 상수도 관망의 에너지 효율에 영향을 주는 요인은 크게 구성요소의 노후와 누수로 구분할 수 있다. 본 연구에서는 상수도 관망 관로 별 노후와 누수 여부를 판단하여 교체 전략을 수립할 수 있는 자산관리 모형을 제안하고 관로별 에너지 효율을 시각화하여 전반적인 자산관리에 근거를 제시하고자 한다. 모형은 최적화 기법을 통한 관로별 기능적 노후도 산정 및 누수 탐지, 관만 내 누수 지역화, 에너지 효율 시각화 등 총 3개의 모듈로 구성되어 있다. 제안한 모형은 고도의 차이가 큰 국내 D시 가상 관망에 적용하였다. 해당 관망에 다양한 관로의 노후 및 누수 상황을 가정하여 가상의 데이터를 생성하고 이를 토대로 관로별 기능적 노후와 누수 조건을 고려하여 해당 모형을 검증한다. 또한, 노후와 누수에 따른 가상 상황별 관로의 자산관리 의사결정 예시를 제공하여 향후 모형의 활용에 대한 가이드 라인을 제시한다. 마지막으로 관망 내 설치된 감압밸브를 터빈으로 전환하여 관망 운영 단계에서 무의미하게 소산되는 열에너지를 회수하는 방안을 검증하였다. 최적화 기법을 통해 비용 대비 최적 터빈 설치 지역을 선정하였고 향후 터빈 설치에 고려해야 할 사항을 정리한다. 본 연구에서의 결과는 향후 종합적인 저탄소형 상수도 관망을 위한 초석을 제공할 것으로 기대한다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.52-57
• /
• 1997

국제 열 핵융합로 (International Thermonuclear Experimental Reactor) 의 중앙 솔레노이드(solenoid) 초전도 전자석의 피복관 (conduit) 으로서 가장 유력한 후보 재료인 니켈-철 기저 초합금에 대한 개선된 파괴역학적 거동 예측 모형을 개발하기 위하여 피로균열 성장과 파괴 인성 치의 측정이 사용되었다. 유한 요소법을 사용하는 상용 구조해석 코드인 ANSYS 제 5.2판에 의해 초전도 전자석 피복관 재료에 대한 탄소성 파괴역학적 거동을 살펴보았다. 정확한 파괴 기준을 개발하기 위하여 삼차원 J 적분 인자에 의한 결과를 사용하였다. 얇은 피복관재의 경우에 절대온도 4도에서의 적합한 파괴 인성치는 실제 단면효과를 고려한 표면균열 인장시험 결과를 토대로 J 적분으로 도출한 150 MPaㆍm$^{1}$2/ 로 제시되었다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.5 s.51
• /
• pp.1-9
• /
• 2006

In this study, axial and lateral loading experiments for both circular and square plain concrete columns confined with carbon fiber tube manufactured by carbon filament winding technique were performed. Based on the test results, reliability analyses to estimate strength reduction factors were carried out by utilizing Monte Carlo technique. CASE I was for plain concrete columns confined with the carbon tubes, CASE II was for reinforced concrete columns confined with the carbon tubes. As results, the strength reduction factors, ${\phi}$, were estimated as 0.7 for CASE I and 0.85 for CASE II respectively.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.54-59
• /
• 2004

In this paper probabilistic fracture mechanics(PFM) approach is employed to evaluate the integrity of CANDU Zr-2.5Nb pressure tubes. Modified failure assessment diagram(Jr-FAD), plastic collapse, and critical crack length(CCL) approach are used for evaluating failure probability of the tubes. Jr-FAD was extended from the Kr-FAD because fracture of pressure tubes occurs in brittle manner due to hydrogen embrittlement of material by deuterium fluence. For developing the probabilistic integrity evaluation module, AECL procedures and fracture toughness parameters of EPRI were used.

• Resources Recycling
• /
• v.8 no.5
• /
• pp.51-58
• /
• 1999

The sbdy iwestlgaled ihc propa-ties of Lhe dust\ulcorner rrom fe~~oallomya ~~ufacturTeh. e chemical composition, cornpasitlon material, p d c l e sire md shapes of the bulk dust, sired dust and magnetically separated durl were mvesligaled. As the re\ulcornerulL, we suppose that the dust from &gh Carbon Fenama~~gunesMc anuiact~vingP rocess is not sufiicient as solulce material of Mn because of ale low Mn canlenl (13.5%) and complicaled composition mate~ial. The dust from Bug F!lter or AOD Proccss is mi~inlym ade up of 0.2-2 pm Mn30, (Hausmam~iu)p iutlde in spherical shape and thc Mn content is 63.190.The dust from Cooler of AOD Process is inninly made up of coarse Ca(O1-Or)zM. n,FeyO,, SiO, and fine Mn30d.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.5
• /
• pp.437-447
• /
• 2016

In a nuclear power plant, the fuel assembly, which is composed of fuel rods, burns, and the high temperature can generate power. The fuel rod consists of pellets and a cladding that covers the pellets. It is important to understand the pellet-cladding mechanical interaction with regard to nuclear safety. This paper proposes simulation of the PCMI. The gap between the pellets and the cladding, and the contact pressure are very important for conducting thermal analysis. Since the gap conductance is not known, it has to be determined by a suitable method. This paper suggests a solution. In this study, finite element (FE) contact analysis is conducted considering thermal expansion of the pellets. As the contact causes plastic deformation, this aspect is considered in the analysis. A 3D FE module is developed to analyze the PCMI using FORTRAN 90. The plastic deformation due to the contact between the pellets and the cladding is the major physical phenomenon. The simple analytical solution of a cylinder is proposed and compared with the fuel rod performance code results.

• Composites Research
• /
• v.19 no.5
• /
• pp.28-33
• /
• 2006

In this paper, we have studied the complex permittivities and their influence on the design of microwave absorbers of E-glass fabric/epoxy composite laminates containing three different types of carbon-based nano conductive fillers such as carbon black (CB), carbon nano fiber (CNF) and multi-wall nano tube (MWNT). The measurements were performed fur permittivities at the frequency band of 0.5 GHz$\sim$18.0 GHz using a vector network analyzer with a 7 mm coaxial air line. The experimental results show that the complex permittivities of the composites depend strongly on the natures and concentrations of the conductive fillers. The real and imaginary parts of the complex permittivities of the composites were proportional to the filler concentrations. But, depending on the types of fillers and frequency band, the increasing rates of the real and imaginary parts with respect to the filler concentrations were all different. These different rates can have an effect on the thickness in designing the single layer microwave absorbers. The effect of the different rates at 10 GHz was examined by using Cole-Cole plot; the plot is composed of a single layer absorber solution line and measured permittivities from these three types of composites. Single layer absorbers of 3 different thicknesses using carbon nano materials were fabricated and the -10 dB band of absorbing performances were all about 3 GHz.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.3
• /
• pp.107-115
• /
• 1998

This paper deals with the study on injection with EPDM(Ethylene propylene dien ter polymer) the gap which narrow, long, and tubular between an ablative composite tube and a steel motor case. Small size motor assembly was designed and manufactured for man-portable air defense propulsion system. Motor assembly is consisted with steel tube, ablative composite tube and insulation rubber. Ablative composite tube was made of carbon/phenolic prepreg by rolling process and insulation rubber was made of EPDM by TPM(Trans-power molding) process. To select the insulation rubber material, we tested ablative insulation property and degradation property at first and we tested fluidity, adhesive property and hardness of EPDM rubber. Finally we designed TPM process to manufacture motor case assembly and the motor case assembly was examined by non-destructive test(X-ray).

• Journal of Yeungnam Medical Science
• /
• v.9 no.1
• /
• pp.137-148
• /
• 1992

The purpose of this study was to evaluate the influence of phenobarbital(PB) on hepatotoxic effect of carbon tetrachloride($CCl_4$) which induces centrilobular necrosis in liver. Rats were injected intraperitoneally $CCl_4$ dissolved in olive oil by a dose of 0.4mg/kg. For change related to PB pretreatment, rats were injected $CCl_4$ 0.4mg/kg after PB pretreatment. The liver samples were taken in 6, 12, 24, 48, 72, and 120 hours after $CCl_4$ and/or FB injection. Extracted liver tissue was examined with light and electron microscopes. The results were sumarized as follows : 1. Light microscopic findings : In $CCl_4$ group, centrilobular necrosis developed from 6 hours after injection, was the most severe in 48 hours, and recovered after 72 hours. In addition to necrosis, fatty change and pale cell change were accompanied. In PB-$CCl_4$ group, necrosis occurred from 6 hours after $CCl_4$ injection and continued to 72 hours, and the degree of necrosis was more severe than that of $CCl_4$ group and pale cell change was decreased. 2. Electron microscopic findings: In $CCl_4$ group, the early principal change was clumping and vesicular dilatation of endoplasmic reticulum. In PB-$CCl_4$ group, the degenerative change of endoplasmic reticulum was aggrevated and the mitochondria also revealed severe degenerative change. According to the results, it was revealed that $CCl_4$ hepatotoxicity primarily began with the damage of endoplasimic reticulum, then damage of other cell organelles and cell necrosis followed, and these cytotoxic effects were aggrevated by PB pretreatment.

• Analytical Science and Technology
• /
• v.18 no.4
• /
• pp.298-308
• /
• 2005

The methods for determining C-14 and tritium contents in the spent nuclear fuel sample were developed. The carbon-14($^{14}CO_2$) released during the dissolution of the spent fuel sample and $CaCO_3$ ($CO_2$ carrier) with 8 M $HNO_3$ at $90^{\circ}C$ was collected in trap containing 1.5 M NaOH. The volatile radioactive iodine evolved when the spent fuel was dissolved, was trapped on to Ag-silicagel (Ag-impregnated silicagel) adsorbent in column which is connected to two NaOH traps. The solutions which contain tritium as HTO after fuel dissolution were decontaminated by deionization with a mixture of cation and anion exchange resins and inorganic ionexchangers. The amount of C-14 in the trap solutions and the HTO concentration in the resulting deionization water were then determined by liquid scintillation counting.