• Elastomers and Composites
• /
• v.12 no.2
• /
• pp.157-164
• /
• 1977

(1) 탄성체(彈性體) MBMA를 가황제(加黃劑)로 사용한 가황체(加黃體)는 MOCA를 가황제(加黃劑)로 한 것 보다 Pot life가 긴 것이 특징(特徵)이다. 물리적(物理的) 특성(特性)에 있어서는 2가지 공(共)히 비승하였으나, 내열성(耐熱性)은 MOCA의 경우가 더 우수(優秀)하였다. 인장강도(引張强度), 신장률(伸張率), 반발탄성(反潑彈性)에 있어서는 MBMA를 사용(使用)한 가황(加黃體)와 MOCA를 사용(使用)한 가황체(加黃體)가 동일(同一)하였으나 압축(壓縮)줄음율은 전자(前者)가 높았다. 인열강도(引裂强度)에 있어서는 10부(部)의 MBMA를 가(加)했을 때 후자(後者)와 동일(同一)하였다. 또 MBIA 가황제(加黃劑)를 사용하였을 경우 인장강도(引張强度), 신장률(伸張率) 그리고 반발탄성등(反潑彈性等)이 MBMA 또는 MOCA의 경우와 거의 동일(同一)하였으나 고무가 부드러운 것이 특징이었다. 다만 100% 모듈러스의 경우 전자(前者)가 후자(後者)들보다 낮은 값이었다. NCO와 OH의 비(比)가 2 : 1인 Prepolymer를 사용한 MBIA가황체(加黃體)(MBIA를 가황제(加黃劑)로 한 가황체(加黃體))는 MBMA 가황체(加黃體) 또는 MOCA 가황체(加黃體)에 비(比)해 인열강도(引裂强度)는 낮았다. 그러므로 인열강도(引裂强度)를 향상(向上)시키기 위하여 NCO와 OH의 비(比)를 2 : 1보다 높은 비율(比率)로 취(取)하면 된다. 내열성(耐熱性)에 있어서 MBIA가황체(加黃體)가 MOCA가황체(加黃體)보다 우수(優秀)하였 고 또 배합작업(配合作業)에 있어서도 MOCA나 MBMA 가황체(加黃體)보다 작업성(作業性)이 용역(容易)하였는 바 이같은 이유(理由)는 전자(前者)의 녹는 점(點)$(70^{\circ}C)$이 후자(後者)들보다 낮기 때문이다. MBIA의 기타(其他) 특성(特性)으로서는 Pot life가 MOCA가황체(加黃體)보다 2.5배(倍) 길었다. 끝으로 MBEHA와 MBCHA가황체(加黃體)의 특징(特徵)은 가황속도(加黃速度)가 MBIA가황체(加黃體)보다 느림과 동시(同時)에 고무자체(自體)가 부드러웠을 뿐만 아니라 물리적(物理的) 특성(特性)도 좋지 않았다. (2) 미세구조용(微細構造用) 포옴라버 미세구조용((微細構造用) 포옴라버를 제조(製造)할 경우 이때까지 사용(使用)해온 MOCA가황제(加黃劑) 대신(代身) MBMA를 가황제(加黃劑)로 대체사용(代替使用)이 가능(可能)한 바, 이를 사용(使用)하였을 때의 물리적(物理的) 특성(特性)은 MOCA를 사용(使用)하였을 때 보다 인열강도(引裂强度), 신장률(伸張率) 그리고 열안정성등(熱安定性等)은 월등(越等)히 우수(優秀)하였다.

• Geophysics and Geophysical Exploration
• /
• v.27 no.1
• /
• pp.57-68
• /
• 2024

Offshore wind power is increasingly regarded as a viable solution for reducing greenhous emissions due to the construction of wind farms and their superior power generation efficiency. Submarine power cables play a crucial role in transmitting the electricity generated offshore to land. To monitor cables and identify points of failure, analyzing the location or depth of burial of submarine cables is necessary. This study reviewed the technology and research for detecting submarine power cables, which were categorized into seismic/acoustic, electromagnetic, and magnetic exploration. Seismic/acoustic waves are primarily used for detecting submarine power cables by installing equipment on ships. Electromagnetic and magnetic exploration detects cables by installing equipment on unmanned underwater vehicles, including autonomous underwater vehicles (AUV) and remotely operated vihicles (ROV). This study serves as a foundational resource in the field of submarine power cable detection.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.1
• /
• pp.1-10
• /
• 1999

InGaP epilayers were grown on the flat, $2^{\circ}$off, $6^{\circ}$ off, and $10^{\circ}$off GaAs substrates by organo-metallic vapor phase epitaxy, and influences of crystallographic misorientation of the substrate on the structural and optical properties such as lattice mismatch, elastic strain, lattice curvature, misfit stress, and PL intensity /line-width were investigated in this study. Material characterizations were carried out by TXRD( tripple-axis x-ray diffractometer) and low temperature (11K) PL (photoluminescence). With increase of the substrate misorientation angle (S.M.A.), the relative incorporation of Ga atoms on the substrate surface was found to be enhanced. Also, with increase of the S. M. A., the x-ray line-width of the InGaP epilayer was reduced, indicating that the crystal quality of the epilayer could be improved tilth a misoriented substrate. It was also found that the elastic accommodation of the strain-free lattice misfit was more remarkable in a misoriented sample. PL intensity increased, and PL line-width and emission wavelength decreased with the increase of S. M. A. The results conclude that the elastic characteristics and the crystal quality of the InGaP epilayer could be remarkably enhanced when the misoriented substrates were employed.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.117-123
• /
• 2015

In order to develop stretchable substrate technology for stretchable devices, locally stiffness-variant stretchable substrates were processed with two polydimethylsiloxane elastomers of different stiffnesses and their deformation behavior was characterized. Low-stiffness substrate matrix and embedded high-stiffness island of the stretchable substrate were formed by using Dragon Skin 10 of the elastic modulus of 0.09 MPa and Sylgard 184 of the elastic modulus of 2.15 MPa, respectively. A stretchable substrate was fabricated to a configuration of 6.5 cm length, 0.4 cm thickness, and 2.5 cm width. The elastic modulus of a stretchable substrate was increased from 0.09 MPa to 0.13~0.33 MPa by embedding a Sylgard 184 island of 1 cm width and 1~6 cm length into the center part of the Dragon Skin 10 substrate matrix. The elastic modulus of a stretchable substrate was improved to 0.16~0.2 MPa by embedding a Sylgard 184 island of 4 cm length and 0.5~1.5 cm width and to 0.1421~0.154 MPa by embedding a Sylgard 184 island of 2 cm length and 0.5~1.5 cm width. With increasing the tensile strain of a stretchable substrate, deformation restriction of the locally stiffness-variant Sylgard 184 island was further enhanced due to substantial increase in the strength difference between Sylgard 184 and Dragon 10 at large strain.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.5
• /
• pp.403-411
• /
• 2023

Functional ultrasound imaging, such as elasticity imaging and micro-blood flow Doppler imaging, enhances diagnostic capability by providing useful mechanical and functional information about tissues. However, the implementation of functional ultrasound imaging poses limitations such as the storage of vast amounts of data in Radio Frequency (RF) data acquisition and processing. In this paper, we propose a sub-Nyquist approach that reduces the amount of acquired axial samples for efficient shear-wave elasticity imaging. The proposed method acquires data at a sampling rate one-third lower than the conventional Nyquist sampling rate and tracks shear-wave signals through RF signals reconstructed using band-pass filtering-based interpolation. In this approach, the RF signal is assumed to have a fractional bandwidth of 67 %. To validate the approach, we reconstruct the shear-wave velocity images using shear-wave tracking data obtained by conventional and proposed approaches, and compare the group velocity, contrast-to-noise ratio, and structural similarity index measurement. We qualitatively and quantitatively demonstrate the potential of sub-Nyquist sampling-based shear-wave elasticity imaging, indicating that our approach could be practically useful in three-dimensional shear-wave elasticity imaging, where a massive amount of ultrasound data is required.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.3
• /
• pp.10-22
• /
• 1973

Recently, nematic and nematic-cholesteric mixtures of substances have been discovered which have stimulated progress in electronics research and industry. In the liquid crystalline state, compounds with nematic mesopheses possess the ability to scatter light, depending on the strength of an applied electric field. The rewaking of interest in this fascinating but long-neglected area has occasioned the introduction of the subjects at the situation of the chemists. Since 1888 year, approximately 2000 compounds have been found to possess the unusual properties of what are commonly referred to as liquid crystals. In this paper, a comprehensive review will not be attempthed here. Nevertheless, some general information necessary to familarize the reader with rather exotic field will facilitate an understanding of the new effect and its application.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.128-128
• /
• 2000

박막의 탄성 특성을 평가하는 방법으로 nano-indentation, Brillouin light scattering measurement, ultrasonic surface wave measurement, bulge test, vibration membrane method 등 여러 가지가 제시되어 왔다. 이러한 방법들은 필름의 두께가 일정 두께 이상이 되어야 정확한 측정이 가능한 방법으로 매우 얇은 박막에서도 탄성특성을 평가할 수 있는 freehang, bridge 방법이 제시되었으며, 이 방법은 간단한 식각 공정을 통해 매우 얇은 박막에도 적용시킬 수 있다는 장점을 가지고 있다. 본 연구에서는 아주 얇은 박막에서도 탄성특성을 평가할 수 있는 freehang 방법을 이용하여 순수한 Diamond-like carbon (DLC) 필름과 Sidl 첨가된 DLC 필름의 탄성 특성을 평가하고자 한다. 실험에서 사용한 필름은 rf-PACVD 장비를 이용하여 증착하였다. 이때 전극과 플라즈마 사이의 바이어스 음전압은 -400 Vb로 합성압력은 10mTorr로 고정하였다. 사용한 반응 가스는 벤젠(C6H6), 그리고 벤젠과 희석된 실렌(SiH4 : H2 = 10 : 90)이며, 희석된 실렌의 첨가량을 조절하여 필름 내에 일정량의 Si을 함유시켰다. 각각의 조건에서 증착시간을 조절하여 필름의 두께를 변화시켰으며, KOH(5.6mol) 용액을 이용하여 습식 식각을 함으로써 freehang을 제작하였다. 이때 식각액에 의한 DLC 필름의 손상은 관찰되지 않았다. 필름의 잔류 응력을 측정하기 위해 200$\pm$10 혹은 100$\pm$5$\mu\textrm{m}$ 두께의 얇은 (100) Si wafer를 5$\times$50 mm2의 strip 형태로 절단하여 사용하였다. 필름의 압축 잔류 응력에 의해 발생한 필름/기판 복합체의 곡률은 laser 반사법과 $\alpha$-step profiler를 이용하여 측정하였으며, 이 결과를 Brenner 등에 유도된 식을 이용하여 잔류 응력을 계산하였다. 또한 제작된 frddhang은 광학 현미경과 전자주사현미경에 의해 관찰되었다. 이렇게 제작된 freehang을 이용하여 필름이 기판에 부착되기 위해 필요한 변형률을 측정하고, 독립적으로 측정된 필름의 잔류 응력을 박막의 응력-변형률 관계식에 적용하여 biaxial elastic modulus, E/(1-v)를 구할 수 있었다. 측정 결과 필름의 잔류 응력과 biaxial elastic modulus는 필름의 두께가 감소함에 따라 감소하는 경향을 나타냈으며, 같은 두께의 필름인 경우, 식각 깊이에 따른 biaxial elastic modulus 의 변화를 통해 최적의 식각 깊이를 알 수 있었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.2
• /
• pp.149-154
• /
• 2012

The size and distribution of welding residual stress and welding deformation in welding structures have an effect on various sorts of damage like brittle failure, fatigue failure and stress corrosion cracking. So, research for this problem is necessary continuously. In this study, non-destructive technique using laser electronic speckle pattern interferometry, plate of welding specimen according to the external load on the entire behavior of residual stress are presented measurement techniques. Once, welding specimen force tensile loading, using electronic speckle pattern interferometry is measured. welding specimen of base metal and weld zone measure strain from measured result, this using measure elastic modulus. In this study, electronic speckle pattern interferometry use weld zone and base metal parts of the strain differences using were presented in residual stress calculated value, This residual stress value were calculated by numerical calculation. Consequently, weld zone of modulus high approximately 3.7 fold beside base metal and this measured approximately 8.46 MPa.

• Journal of the Microelectronics and Packaging Society
• /
• v.5 no.1
• /
• pp.83-90
• /
• 1998

LPCVD를 이용하여 증착한 SiN과 ECR plasma CVD를 이용하여 증착한 SiC의 물 성과 적용가능성을 시험하였다. LPCVD로 증착된 SiN은 열처리 없이 저 응력의 박막형성이 가능했으며 가시광투과도 표면 평활도 역시 우수하였다. 탄성계수 값이 크지 않아 자성센서 의 지지구조로 사용할 경우 자기공명에 의한 진동을 크게 구속하지 않아 유리할것으로 기대 된다. 반면 ECR plasma CVD로 증착된 SiC는 SiN보다는 못하지만 다른 방법에 의해 증착 된 SiC에 비해서는 가시광 투과도 및 표면 평활도가 후수하므로 X-선 조사에 대한 안정성 과 더불어 X-선 마스크용 membrane으로서 사용이 적절할 것으로생각된다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.11
• /
• pp.88-98
• /
• 1993

In this paper, the effective permittivity in the piezoelectric material is numerically obtained and greens function is derived from that. It is shown that the admittance and the transfer function of an interdigital transducer is represented by electrostatic charge distribution using Quasi-static approximation. To prove the validity of the quasi-static approximation, numerical results for the uniform IDT of a filter mounted on 128 $^{\circ}$ rotated Y-cut X-propagating Lithium Niobate are compared with the measured ones.