• Korean Journal of Materials Research
• /
• v.9 no.8
• /
• pp.763-767
• /
• 1999

Composite materials have been increasingly used in automotive and aircraft industries, naturally leading to active researches on the materials. Carbon-epoxy composites, one of major composite materials, are investigated to determine their thermal characteristics. Under conditions of thermal fatigues composed of repeated heatings and coolings, variations of elastic constants are studied for the carbon-epoxy composites to reveal the thermal nature of the composites. In general, composite materials are known to have decreasing elastic constants with increasing temperatures. However, in contrary to this commonly observed behavior, the results obtained in this investigation for the elastic constants of the carbon-epoxy composites show unexpected phenomena in that the elastic constants initially increase with increasing temperatures to certain point and decrease later with further increase in temperatures when the carbon-epoxy composites are subjected to thermal fatigues.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.225-232
• /
• 1997

Material properties of a new composite composed of components with known material properties are usually investigated through experiments. Elastic modulus and Poisson's ratio are measured at various volume fractions of mixed components and utilized as the base information on an analytical model for predicting the mechanical behaviors of a structure constructed by the composite. Elastic material properties of a composite at various volume fractions are numerically estimated by minimizing the error between the static displacements computed from a model for the composite and those computed from a model of homogeneous and isotropic material. A finite element model for a composite is proposed to distribute different types of material components easily into the model depending on the volume fraction. Then, the material properties of a composite filled with solid mircospheres are predicted numerically through a sample study and the estimated results are compared with experimental results and some theoretical equations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.527-534
• /
• 2014

Poroelastic analyses of fiber-reinforced composites were performed using image-based computational models. The section image of a porous matrix was analyzed in order to investigate the porosity, number of pores, and distribution of pores. The resolution, location, and size of the section image were considered to quantify the effective elastic modulus, poroelastic parameter, and strain energy density using the image-based computational models. The poroelastic parameter was calculated from the effective elastic modulus and pore pressure-induced strain. In addition, the results of the poroelastic analyses were verified through representative volume elements by simplifying various pore configurations and arrangements.

• Journal of the KSME
• /
• v.56 no.6
• /
• pp.41-45
• /
• 2016

로봇의 활용도가 높아짐에 따라, 로봇은 단순한 기계가 아니라, 인간처럼 판단하고 행동하도록 지능화되고 있으며, 소프트 지능재료를 활용하여 생체 근육을 모사한 다양한 소프트 로봇에 대한 연구들이 소개 되고 있다. 이 글에서는 소프트 지능재료 중에서, 특히 유전탄성체 기반의 소프트 로봇에 대한 현재 국내외 연구동향을 소개하고 향후 전망에 대해 기술하고자 한다.

• Composites Research
• /
• v.13 no.2
• /
• pp.8-21
• /
• 2000

In th is paper. the low degree of homogeneity issue in the effective modulus was studied for plain weave textile composites. Unit cell analyses were performed using multi-field macroelements. The effective moduli were calculated for finite and infinite configurations and the statistics assessment of the results was presented. Results indicated that the effective modulus of plain weave textile composites depended strongly on the fiber tow phase shift angles and the number of layers. As the number of layers increased, however, the distribution of the modulus showed concentration and higher degrees of homogeneity was attained.

• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.67-75
• /
• 2002

For the design of concrete structures in the serviceability limit state, the uniaxial static modulus of elasticity may be a most important parameter. In particular, this may be so just for a deflection control of the structure. Even in new concrete codes, however, the elastic modulus is normally presented on the form of general empirical relationships with the compressive strength and density of concrete. Normally, there is a large uncertainty associated with the general equations obtained by regression. Thus, in a typical plot of static modulus of elasticity vs. compressive strength, a large scatter can be observed at same strength. The aim of this study is to present the method for obtain the maximum modulus of elasticity at same compressive strength. In the present paper report the effects of mix ingredients on the modulus of elasticity of high-strength concrete. The test of 284 cylinder specimens arc conducted for type I with 11 ％ replacement of fly-ash cement concretes. Different water-hinder ratio, amounts of water and coarse aggregate as variables were investigated. And also analyzed it statistically by using SAS.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.48-56
• /
• 2013

In this paper, the equivalent elastic properties of fiber reinforced plastic laminar are investigated using various homogenization schemes. Although there are several methods for predicting the equivalent elastic properties such as analytical formula or semi-empirical formula, most of them have some limitations or are not much accurate when handling new composite material consisting of various fiber, matrix and fiber-volume fraction ratio. To resolve the issues, computational homogenization scheme is adopted with a representative volume element (RVE) comprised of a set of finite elements. Finally, the equivalent elastic properties are obtained by applying periodic boundary conditions. The obtained results are compared with those by the existing methods and test results. Also its effect on structural analysis results of the composite satellite panel is investigated.

• The Journal of Korean Academy of Prosthodontics
• /
• v.11 no.1
• /
• pp.22-25
• /
• 1971

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.8
• /
• pp.91-100
• /
• 2004

A Green's function approach is adopted for analyzing the thermoelastic deformations and stresses of a plate made of functionally graded materials(FGMs). The solution to the 3-dimensional unsteady temperature is obtained by using the laminate theory. The fundamental equations for thermoelastic problems are derived in terms of out-plane deformation and in-plane force, separately. The thermoelastic deformation and the stress distributions due to the bending and in-plane forces are analyzed by using a Green's function based on the Galerkin method. The eigenfunctions of the Galerkin Green's function for the thermoelastic deformation and the stress distributions are approximated in terms of a series of admissible functions that satisfy the homogeneous boundary conditions of the rectangular plate. Numerical analysis for a simply supported plate is carried out and effects of material properties on unsteady thermoclastic behaviors are discussed.

• Membrane Journal
• /
• v.16 no.2
• /
• pp.144-152
• /
• 2006

Elastomer-clay nanocomposite membranes were prepared by melt intercalation mothod with internal mixer. We are used NMR, Ionomer, SEBS (Styrene Ethylene Butadien styrene Copolymer) as elastomer, and modified clay. Gas barrier property of the elastomer-clay nanocomposites membranes were investigated by a gas permeability of $CO_2,\;O_2,\;N_2$ at room temperature. Gas permeability through the elastomer-clay nanocomposite membranes increased due to increased tortuosity made by intercalation of clay in elastomer.