• Composites Research
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2012

In order to predict the thermoelastic behavior of porous composites, poroelastic parameters are measured by using micromechanics-based finite element models. The expanding deformation caused by pore pressure, and the degradation of homogenized elastic moduli with pores are calculated for the assessment of the poroelastic parameters. Various representative volume elements considering the shape, size, and array pattern of pores are modeled and analyzed by a finite element method. The effects of porosity and material anisotropy, and the distribution of stain energy density are investigated carefully. In addition, the measured poroelastic parameters are verified by predicting the thermo-pore-elastic behavior of carbon/phenolic composites.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.535-541
• /
• 2020

A conventional elastic material replacement and performance evaluation are very complicated and time-consuming, and it is difficult to know when to replace the elastic material in advance. By comparing with the product limit and the functional limit, the necessity of elastic material replacement and the improvement of track support stiffness according to replacement can be immediately demonstrated based on experimental data. Using an evaluation system of track support stiffness, the performance evaluation data for elastic materials obtained through field tests using software for track support stiffness is integrated and managed on the administrator's computer. Therefore, the replacement plan is established and maintenance history is managed by identifying the replacement time and location of elastic materials. It is possible to evaluate the performance and condition of the elastic material at the various points during the working time of the track inspection and the track performance (track support stiffness) and durability of the elastic material (aging level, spring stiffness variation rate, etc.) at the operation condition. The elastic material could be replaced timely, and the deterioration of the elastic material can be continuously monitored.

• Journal of the KSME
• /
• v.29 no.3
• /
• pp.231-243
• /
• 1989

복합재료의 탄성 문제를 정리하면 다음과 같다. 복합재료와 등방성 재료의 탄성학적 차이는 재료의 탄성계수에 기인하며 이것은 각각 다른 형태의 응력-변형률관계를 갖게 한다. 한편 응 력-변형률 관계식을 제외한 탄성학의 지배방정식은 재료의 종류에 관계없이 성립한다. 복합적 층판의 Stiffness와 응력 등은 Lamination 이론을 사용하여 구할 수 있다. 판이론은 평형식을 z방향으로 적분한 식, 즉 합력(resultant force)와 모멘트로 나타낸 평형식을 사용하는데 이 때 처짐 방정식을 구하기 위해 합력. 모멘트-곡률. 변형률 관계식을 이용하는데 이 관계식이 복합 재료와 등방성재료가 상이하다. 결과로 복합재료는 커플링 효과를 갖게 되며, 복합적층판을 대 칭으로 쌓으면 이 효과를 상쇄시킬 수 있다. 복합적층 보의 이론은 유효 굽힘 계수를 도입하면 등방체 보 이론을 사용하여 보의 처짐을 해석할 수 있다. 복합적층 보의 경우 굽힘 응력의 최 대치는 등방체와는 달리 보의 표면에서만 일어나지 않고 내부에서도 일어날 수 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4
• /
• pp.54-61
• /
• 2001

Magnetostrictive materials have nonlinear elasto-magnetic properties. However the constitutive equations to describe the nonlinear properties are not available, yet. In this study we develope the equation in magnetostrictive materials by use of piezomagnetic constitutive equation which is quasi-linearized. With the wave equation, we determine the propagation velocity inside the magnetostrictive materials when a plane wave propagates along a given magnetic field. Validity of the calculated velocity is verified through comparison with experimental velocity measurement results for the most representative magnetostrictive materials. Terfenol-D.

• Composites Research
• /
• v.15 no.6
• /
• pp.30-37
• /
• 2002

A stiffness model has been proposed to predict elastic constants of twisted yam composites. The model is based upon the unit cell structure, the coordinate transformation, and the volume averaging of compliance constants for constituent materials. For the correlation of analytic results with experiments, composite samples of various yam twist angles were tested, and strength and Young's modulus under tensile, compressive, and shear loading have been obtained. The sample was fabricated by the RTM process using glass yarns and epoxy resin. The correlations of elastic constants showed relatively good agreements. The model provides the predictions of the three-dimensional engineering constants, which are valuable input data for the analytic characterization of textile composites made of twisted yam.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.4
• /
• pp.227-236
• /
• 1997

Quantitative analysis and imaging of elastic wave propagation are very important for the materials evaluation as well as flaw detection. The elastic wave propagation in an anisotropic media is more complex, and analysis and imaging become essential for flaw detection and materials evaluation. In the anisotropic media, the wave velocity is dependent on the propagation direction. In addition, the direction of group velocity is different from that of phase velocity, the direction of energy flow is not same as the propagation direction of wavefront (beam skewing effect). Especially, this effect becomes critical for the large anisotropic media such as fiber composite materials, and the results using elastic waves for those materials have to be analyzed considering the wave propagation mechanism. Since the analytical approach for the wave propagation in the anisotropic materials is limited, the numerical analysis such as finite difference method (FDM) have been used for these case. Therefore, 2-dimensional FDM program for the elastic wave propagation is developed, and wave propagation in anisotropic media are simulated.

• Composites Research
• /
• v.36 no.3
• /
• pp.141-153
• /
• 2023

This review paper presents an introduction of contact mechanics and rubber friction theory for sliding friction of elastomer composites in contact with rough surfaces. Particularly, Klüppel & Heinrich theory considers the self-affine (or fractal) characteristic for rough surfaces to predict adhesion and hysteresis frictions of elastomers based on the contact mechanics of Greenwood & Williamson. Due to dynamic excitation process of elastomer composites while sliding in contact with multiscale surface roughness (or asperity), viscoelastic properties in a wide frequency range becomes major contributor to friction behaviors. A brief description and examples are provided to construct a viscoelastic master curve considering nonlinear viscoelasticity of elastomer composites. Finally, application of rubber friction theory to tire tread compounds in traction with road surfaces is discussed with several experimental and theoretical results.

• Korean Journal of Materials Research
• /
• v.5 no.3
• /
• pp.268-274
• /
• 1995

세라믹재료의 동탄성계수 측정을 위한 공진주파수 측정장치를 구성하였다. 구조용 세라믹 재료로 이용되는 $Al_{2}$O_{3}$, SiC, $Si_{3}$N_{4}$의 온도를 120$0^{\circ}C$까지 5$0^{\circ}C$의 온도간격으로 올리면서 torsional resonant frequency와 flexural resonant frequency를 측정하고, 측정된 공진주파수로부터 각 재료의 탄성계수를 구하였다. SiC의 경우는 120$0^{\circ}C$의 온도까지 탄성계수가 선형적으로 감소하였으나, $Al_{2}$O_{3}$와 $Si_{3}$N_{4}$의 경우에는 각각 100$0^{\circ}C$와 80$0^{\circ}C$까지는 선형적으로 감소하나, 그 이상의 온도에서는 탄성게수의 감소폭이 증가하는 현상을 보였다. 이러한 현상은 다결정재료에서의 grain boundary sliding에 의한 것으로 알려져 있다. 상온에서 공진법으로 측정된 동탄성계수의 측정결과는 초음파법으로 측정한 결과와 비교하였는데, 4% 내에서 서로 일치하는 결과를 보였다.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.73-79
• /
• 2010

In this study, the equivalent elastic modulus of flexible textile composites was predicted by nonlinear finite element analysis. The analysis was carried out considering the material nonlinearity of fiber tows and the geometrical nonlinearity during large deformation using commercial analysis software, ABAQUS. To account for the geometrical nonlinearity due to the large shear deformation of fiber tows, a user defined material algorithm was developed and inserted in ABAQUS. In results, nonlinear stress-strain curve for the flexible textile composites under uni-axial tension was predicted from which effective elastic modulus was obtained and compared to the test result. The effective elastic moduli were calculated for the various finite element models with different waviness ratio of fiber tow.

• Composites Research
• /
• v.29 no.2
• /
• pp.66-72
• /
• 2016

Porosity in polymer matrix composites increases rapidly during thermochemical decomposition at high temperatures. The generation of pores reduces elastic moduli and failure strengths of composite materials, and gas pressures in internal pores influence thermomechanical behaviors. In this paper, micromechanical finite element analysis is carried out by using two-dimensional representative volume elements for unidirectionally fiber-reinforced composites with porous matrix. According to the state of the pores, effective elastic moduli, poroelastic parameters and failure strengths of the overall composites are investigated in detail. In particular, it is confirmed that the failure strengths in the transvers and through-thickness directions are predicted much more weakly than the strength of nonpored matrix, and decrease consistently as the porosity of matrix increases.