• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1313-1318
• /
• 2006

The mechanism fur the surface film formation was studied by in situ Atomic Force Microscopy (AFM) observation of a highly oriented pyrolytic graphite (HOPG) basal plane surface during cyclic voltammetry at a slow scan-rate of 0.5 mV $s^{-1}$ in 1 moi $dm^{-3}$ (M) $LiPF_6$ dissolved in a mixture of ethylene carbonate (EC) and diethyl carbonate (DEC). Decomposition of the electrolyte solution began at a potential around 2.15 V vs. $Li^+$/Li on step edges. In the potential range 0.95-0.8 V vs. $Li^+$/Li, flat areas (hill-like structures) and large swelling appeared on the surface. It is considered that these two features were formed by the intercalation of solvated lithium ions and their decomposition beneath the surface, respectively. At potentials more negative than 0.80 V vs. $Li^+$/Li, particle-like precipitates appeared on the basal plane surface. After the first cycle, the thickness of the precipitate layer was 30 nm. The precipitates were considered to be decomposition of the lithium salt ($LiPF_6$) and solvent molecules (EC and DEC), and to have an important role in suppressing further solvent decomposition on the basal plane.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.117-125
• /
• 2017

The role of fly ash in concrete become impotent with finding the characteristics of fly ash in which it is used as cement replacement material. In this paper, corrosion test results obtained by two test methods such as the long-term exposure corrosion test and the accelerated corrosion test method, were compared to investigated the corrosion resistance between fly ash concrete and normal concrete. Corrosion initiation time was measured in two types of concrete, i.e., one mixed with fly ash(FA) and the other without admixture(OPC). The accelerated corrosion test was carried out by four case, i.e., two samples is a cyclic drying-wetting method combined without carbonation(case 1) and combined with carbonation(case 2), and the other two samples is a artificial seawater ponding test method combined without carbonation(case 3) and combined with carbonation(case 4). Whether corrosion occurs, it was measures using half-cell potential method. The ponding test combined without carbonation was most effective in accelerating corrosion time of steel bars. The results indicated that the corrosion of rebar embedded in concrete occurred according to the order of OPC, FA. The delay relative ratio of corrosion obtained by corrosion initiation time between FA and OPC is 1.04 to 1.27. Consequently, fly ash concrete as the age increases its corrosion resistance was improved compared with OPC concrete.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.90-96
• /
• 2014

The electrical resistivity of concrete can be related to two processes involved in corrosion of reinforcement: initiation (chloride penetration) and propagation (corrosion rate). The resisistivity of concrete structure exposed to chloride indicates the risk of early corrosion damage, because a low resistivity is related to rapid chloride penetration and to high corrosion rate. Concrete resistivity is a geometry-independent material property that describes the electrical resistance, which is the ratio between applied voltage and resulting current in a unit cell. In previous study, it was realized that the resistivity of concrete depended on the moisture content in the concrete, microstructural properties, and environmental attack such as carbonation. The current is carried by ions dissolved in the pore liquid. While some data exist on the relationship between moisture content on electrical resistivity of concrete, very little research has been conducted to evaluate the effect of chloride on the conduction of electricity through concrete. The purpose of this study is to examine and quantify the effect of chloride content on surface electrical resistivity measurement of concrete. It was obvious that chloride content had influenced the resistivity of concrete and the relationship showed a linear function. That is, concrete with chloride ions had a comparatively lower resistivity. Decreasing rate of resistivity of concrete was clear at early time, however, after 50 days resistivity was constant irrespective of chloride concentration. Conclusively, this paper suggested the quantitive solution to depict the electrical resistivity of concrete with chloride content.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.3
• /
• pp.265-271
• /
• 2015

This study is intended to produce a PC (Precast Concrete) member without a steam curing process in developing the high early strength concrete satisfying the condition of 10MPa in compressive strength at the age of 6 hours, and is intended to ensure economic feasibility by increasing the turnover rate of concrete form. Hence, high early strength cement with high $C_3S$ content and the hardening accelerator of powder type accelerating the hydration of $C_3S$ was used. And the properties of concrete were evaluated according to the hardening accelerator mixing ratio (0, 1.2, 1.6, 2.0). No big difference was found from the tests of both slump and air content. When 1.6 % or higher amounts of the hardening accelerator were mixed, the compressive strength of 10MPa was achieved at the age of 6 hours. From the test results of autogenous (drying) shrinkage and plastic shrinkage, it can be seen that there was a difference according to hydration reaction rate due to the addition of the hardening accelerator. However, it was shown that no problem arose with crack and durability. And it was shown that resistance to freezing-thawing, carbonation, and penetration were excellent.

• Journal of the Korean earth science society
• /
• v.35 no.4
• /
• pp.225-236
• /
• 2014

Multivariate statistical analyses have been extensively applied to hydrochemical measurements to analyze and interpret the data. This study examines anthropogenic factors obtained from applications of correspondence analysis (CA) and principal component analysis (PCA) to a hydrogeochemical data set. The goal was to synthesize the hydrogeochemical information using these multivariate statistical techniques by incorporating hydrogeochemical speciation results calculated by the program, commonly used, WATEQ4F included in the NETPATH. The selected case study was LPG underground storage caverns, which is located in the southeastern Korea. The highly alkaline groundwaters at this study area are an analogue for the repository system. High pH, speciation of Al and possible precipitation of calcite characterize these groundwaters. Available groundwater quality monitoring data were used to confirm these statistical models. The present study focused on understanding the hydrogeochemical attributes and establishing the changes of phase when two anthropogenic effects (i.e., disinfection activity and cement pore water) in the study area have been introduced. Comparisons made between two statistical results presented and the findings of previous investigations highlight the descriptive capabilities of PCA using calculated saturation index and CA as exploratory tools in hydrogeochemical research.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.1
• /
• pp.96-100
• /
• 1993

The changes in the concentration of toropherol and carotenoid in pinenut oil at various stage of refining are studied during autoxidation. The oxidative stability of pinenut oil decreased with the refining degree increased. The tocopheol content of total crude oil was 55.51mg/100g oil and $\alpha$, ${\gamma}$and $\beta$-tocopherol in the crude oil were 25.48mg, 23.94mg and 6.99mg in order, respectively. The amount of $\delta$-tocopherol was trace. The concentrations of $\alpha$, ${\gamma}$ and $\beta$-tocopherol in pinenut oil after degumming or alkaline refining were 23. 85mg, 19.79mg and 6.12mg or 24.08mg, 24.04mg and 5.33mg, respectively. The content of f-carotene was 0.63% of total unsaponifiable materials and that of lycopene was trace. The concentrations of carotenoids and toropherols in pinenut oil decreased while autoxidation progressed. Degrees of destruction of carotenoids and toropherols. were significant at first stage of oxidation. Decrease in $\alpha$-toropherol was found to be faster than that in $\alpha$, ${\gamma}$-tocopherol during oxidation.

• Journal of the East Asian Society of Dietary Life
• /
• v.12 no.1
• /
• pp.47-54
• /
• 2002

This study examined the chemical and sensory characteristics of Altari Dongchimi with inoculation of Leuconostoc citreum IH22. Dongchimi was stored at room temperature for the first day and at 4$^{\circ}C$ from 2nd to 28th day. The pH was somewhat lower in Altari Dongchimi when first inoculated with Leuconostoc citreum IH22 than non -treated Dongchimi. As fermentation proceeded, titratable acidity of Altari Dongchimi significantly increased. The patterns of microflcral changes in both the inoculated and the control were similar during fermentation: the total number of bacteria increased at the beginning, but rapidly decreased right after the optimum ripening point. The hardness and fracturability of both Dongchimi's decreased gradually during fermentation. The evaluation of the sensory qualities showed that the sour taste and fresh taste resulted in similar scores in both Dongchimi's but overall acceptability of the control was higher than that of inoculated one with Leuconostoc citreum IH22.

• Economic and Environmental Geology
• /
• v.36 no.2
• /
• pp.75-87
• /
• 2003

The Haman-Gunbuk mineralized area is located within the Cretaceous Gyeongsang Basin along the southeastern part of the Korean peninsula. Major ore minerals, magnetite, scheelite, molybdenite and chalcopyrite, together with base-metal sulfides and minor sulfosalts, occur in fissure-filling tourmaline, quartz and carbonates veins contained within Cretaceous sedimentary and volcanic rocks anu/or granodiorite (118{\pm}$3.0 Ma). The ore and gangue mineral paragenesis can be divided into three distinct stages: Stage 1, tourmaline+quartz+Fe-Cu ore mineralization; Stage II, quartz+sulfides+sulfosalts+carbonates; Stage 111, barren calcite. Earliest fluids are recorded in stage I and early por-tions of stage II veins as hypersaline (35~70 equiv. wt.% NaCl+KCl) and vapor-rich inclusions which homogenize from ~30$0^{\circ}C$ to $\geq$50$0^{\circ}C$. The high-salinity fluids are complex chloride brines with significant concentrations of sodium, potassium, iron, copper, and sulfur, though sulfide minerals are not associated with the early mineral assemblage produced by this fluid. Later solutions circulated through newly formed fractures and reopened veins, and are recorded as lower-salinity(less than ~20 equiv. wt.% NaCl) fluid inclusions which homogenize primarily from ~200 to 40$0^{\circ}C$. The oxygen and hydrogen isotopic compositions of fluid in the Haman-Gunbuk hydrothermal system represents a progressive shift from magmatic-hydrothermal dominance during early mineralization stage toward meteoric-hydrothermal dominance during late mineralization stage. The earliest hydrothermal fiuids to circu-late within the granodiorite stock localiring the ore body at Haman-Gunbuk could have exsolved from the crystal-lizing magma and unmixed into hypersaline liquid and $H_2O$-NaCl vapor. As these magmatic fluids moved throughfractures, tourmaline and early Fe, W, Mo, Cu ore mineralization occurred without concomitant deposition of othersulfides and sulfosalts. Later solutions of dominantly meteoric origin progressively formed hypogene copper and base-metal sulfides, and sulfosalt mineralization.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 1998.05a
• /
• pp.10-10
• /
• 1998

생명공학의 혁신적 발명성을 매우 잘 보여주는 성공사례의 하나가 사람락토페린을 함유한 형질전환 젖소의 개발이다. 우유의 모유화를 내걸고 있는 본 연구는 국내·외에 막대한 잠재시장 규모가 예상되고 있다. 그러나 생명공학 제품은 ‘생물 재해(Bio Hazard)’에 대한 우려와 윤리문제를 제기할 수 있기 때문에 대중인식(Public Acceptance)에 대한 연구가 매우 중요한 의미를 가지는 것이다. 이러한 상황인식하에 사람락토페린을 함유한 유제품에 대한 소비자행태분석(Consumer Behavior Analysis)을 수행하게 되었다. 본 연구에 사용된 연구방법은 비시장가치평가법 중 임의가치평가법(CVM)을 사용하고 있다. 임의가치평가법은 선진국 특히 본 이론의 발상지인 미국에서 환경재기 가치를 측정하는 방법으로 사용되어 오고 있는데 이를 신상품 및 과학기술의 가치평가법으로 확대하여 연구하여온 필자의 일련의 연구중의 한 시도이다. 좋은 CVM 연구를 수행하기 위해서는 CVM이 요구하는 가치평가방법에 맞추어 설문서가 구성되고 분석되는 일이 무엇보다도 중요한 일이다. 본 연구에서는 CVM의 연구방법에 맞추어 사람락토페린 강화우유에 대한 소비자지불의향(Consumer Willingness to Pay) 조사와 더불어 사람락토페린 강화우유에다가 DHA, 칼슘 등 새로운 기능성 물질을 추가하여 더욱 좋은 기능을 첨가한 경우의 구입할 용의와 지불의향에 대한 조사를 수행하였다. 본 연구에서는 과학기술에 의해 탄생된 신상품에 대한 임의가치평가법의 적용이라는 새로운 시도의 연구라는점을 감안하여 본 연구를 바탕으로 더욱 새로운 문제제기와 추가적인 연구가 필요하다고 생각된다.적인 자세를 견지한다. 한편, 적응의 원리에 입각한 교육은 문화와 전통에 대한 피동적 전승을 넘어서 사회의 변화에 따라 교육체제와 내용을 바꾸는 등 적극적으로 변화에 대응하고, 이러한 변화를 주도할 인간육성에 힘을 기울이는 교육방식을 취한다. 시대적 변화의 소용돌이 속에서 교육은 이제 기왕의 많은 교육적 신화들을 타파하고 뉴 밀레니엄을 준비해야할 기로에 서 있다. 현재의 변화를 슬기롭게 대처하고 미래의 변화에 능동적으로 적응하는 인간을 육성하기 위한 오늘날 교육의 사명은 우선 미래사회를 위한 교육정책의 방향을 수립하는 일이다. 교육정책은 국가의 교육방침으로서 현실 교육문제의 해결도 중요하지만 미래의 발전을 기약할 수 있는 장기적인 비젼과 목표 속에서 정립될 필요가 있다. 이러한 의도하에 본 연구는 21세기를 대비한 교육정책의 방향을 탐색하고 그에 따른 정책적 과제를 제시하는 데 그 목적이 있다. 이러한 목적하에 본고는 \circled1 과거 우리 나라의 교육정책을 반성적으로 회고하고, \circled2 미래사회에 대한 전망과 교육적 시사점을 분석하며, \circled3 마지막으로 21세기의 변화에 적응하기 위한 교육정책의 방향과 과제를 내용으로 제시하고자 한다.탄산염으로의 전환이 진행되고 있다. 이러한 배경으로부터 Uchida그룹에서 개발한 FeiCr/AVTi재료와 현재 분리판 재료로 사용증인 SUS 310, S SUS 316재료에 대해. 산화성 분위기의 5기압까지의 가압하에서, Li-K, Li-Na탄산염에 대하여 부 식거동을 검토한 결과, 가압하에서 내식성이 향상되는 것이 발견되었다. 이유로서는 가압하에서 용융탄산엽의 증가된 산화력으로 보다 치밀한 내식성 산화물 피막

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.116-116
• /
• 2018

부식은 재료와 사용 환경과의 상호작용에 의한 결과로서 일반적으로 두께의 감소와 균열의 발생 및 파손 등의 문제로 나타난다. 특히 사용환경 중에서 해수 분위기는 금속의 부식에 가장 유리한 조건이다. 따라서 해양환경 중 항만이나 조선 및 해양 산업 등에 많이 이용되는 강 구조물은 이에 대응하기 위하여 도장방식이나 음극방식을 사용하고 있다. 여기서 음극방식은 피방식체를 일정전위로 음극 분극하는 원리로써 외부전원을 인가하거나 비전위의 금속을 전기적으로 연결하여 방식하는 방법이다[1]. 한편, 해수 중에서 이와 같은 원리로 음극방식 할 경우에는 피방식체인 강재표면에 부분적으로 칼슘 또는 마그네슘 화합물 등의 생성물이 부착하는 현상을 볼 수 있게 된다. 이와 같이 수산화마그네슘($Mg(OH)_2$)및 탄산칼슘($CaCO_3$)을 주성분으로 하여 석출되는 석회질 피막(calcareous deposits)은 피방식체에 유입되는 음극방식 전류밀도를 감소시켜 주거나 물리적 장벽의 역할을 함으로써 외부의 산소와 물 등 부식환경으로부터 소지금속을 보호한다[2]. 그러나 석회질 피막은 소지금속과의 결합력, 막의 균일한 분포, 내식성 및 제작시간의 단축 등 해결해야 할 과제가 있다. 또한 여러 가지 환경 조건 등의 영향을 받아 그 피막의 형성 정도도 가늠하기 어렵기 때문에 음극방식 설계 시 그 정도에 따른 영향을 고려-반영하기가 곤란하다. 따라서 본 연구에서는 석출속도, 밀착성 및 내식특성을 향상시키기 위해 전착프로세스를 통해 해수 중 기체를 용해시켜 석회질 피막을 제작하고 막의 결정구조 제어 및 특성을 분석-평가하였다. 본 연구에 사용된 강 기판(Steel Substrate)은 일반구조용강(KS D 3503, SS400)을 사용하였으며, 외부전원은 정류기(Rectifier, xantrex, XDL 35-5T)를 사용하여 3 및 $5A/m^2$의 조건으로 인가하였다. 양극의 경우에는 해수에 녹아있는 이온 이외에 다른 성분들이 환원되는 것을 방지하기 위해 불용성 양극인 탄소봉(Carbon Rod)을 사용하였다. 이때 석출속도, 밀착성 및 내식특성 향상을 위해 해수에 주입한 기체의 양은 0.5 NL/min였으며, 기판 근처에 고정하여 음극 부근에서의 반응을 유도하였다. 각 조건별로 제작된 막의 표면 모폴로지, 조성원소 및 결정구조 분석을 실시하였으며, 석회질 피막의 밀착성과 내식특성을 평가하기 위해 규격에 따른 테이핑 테스트(Taping Test, ISO 2409)와 3 % NaCl 용액에서 전기화학적 양극 분극 시험을 진행하여 제작된 막의 내구성과 내식성을 분석-평가하였다. 시간에 따른 전착막의 외관관찰 결과 전류밀도의 증가와 함께 상대적으로 많은 피막이 형성되었고, 용해시킨 기체에 의해 더 치밀하고 두터운 피막이 형성됨을 확인할 수 있었다. 성분 및 결정구조 분석 결과 $Mg(OH)_2$ 성분의 Brucite 및 $CaCO_3$ 성분의 Calcite 및 Aragonite 구조를 확인하였으며, 용해시킨 기체의 영향으로 $CaCO_3$ 성분의 Aragonite 구조가 상대적으로 많이 검출되었다. 밀착성 및 내식성 평가를 실시한 결과 해수 중 용해시킨 기체에 의해 제작한 시편의 경우 견고하고 화학적 친화력이 높은 Aragonite 결정이 표면을 치밀하게 덮어 전해질로부터 산소와 물의 침입을 차단하는 역할을 하여 기체를 용해시키지 않은 3 및 $5A/m^2$ 보다 비교적 우수한 밀착성 및 내식 특성을 보이는 것으로 사료된다.