• Clean Technology
• /
• v.11 no.1
• /
• pp.51-56
• /
• 2005

In this paper we prepared dextrin dialdehyde (DAS) of a different oxidation ratio (aldehyde content) and examined their properties and discussed their tanning mechanism. DAS was produced by reacting dextrin in aqueous medium with periodate ion used in a molar ratio between periodate and glucose of 0.3 to 1.0 at a temperature of 20 to $45^{\circ}C$. Since DAS reacts with amino group, DAS may have tanning property of aldehyde tanning agent (formaldehyde, glutaraldehyde).

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.112-112
• /
• 2011

가구용으로 제조되는 가죽(Leather)은 대부분 화학적인 약품을 이용하여 코팅을 진행하기 때문에 현대사회에서 추구하는 친환경적인 면에서 미흡한 면이 있다. 그래서 예전부터 전해오는 전통적인 방법인 나무 및 식물에서 추출한 천연 탄닝제인 Minosa, Quebracho, Chestnut, Tara 등을 사용하여 가죽을 제조하고, 자연그대로의 맞을 살릴 수 있는 전통 코팅 방법인 옻을 이용하여 가죽에 코팅하는 가죽 제조 연구를 진행하였다. 옻은 방부성, 항균성, 아토피 피부염 예방, 자연스러움 등이 우수한 친환경적인 코팅제 재료이다. 특히, 현대 실내용 가구의 친환경적인 코팅제에 대한 관심이 증가하면서 주목을 받는 천연 물질이다. 본 연구에서는 천연 탄닝제를 이용하여 가죽 원단(Curst)에 옻의 주성분인 우르시올(Urushiol)을 이용하여 패딩, 스프레이, 롤코터 등의 다양한 방법으로 코팅 처리 후 가죽의 물성 및 특성을 연구하였다. 연구 결과 제조된 옻 코팅 가죽은 고기능성을 가질 뿐 만 아니라, 안락감과 고감성을 지니는 최고급 소파 소재로 다양한 표면 효과를 창출할 수 있을 것으로 기대되었다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.4
• /
• pp.100-106
• /
• 2007

In this paper, first we went through the deliming and degreasing as pre-treatment of limed pelt scrap which is derived from liming process during leather manufacturing processing. After that, we produced fine collagen using non-chrome tanning and heat treatment and using acryl monomer graft polymerization such as GMA and MMA. From the comparisonof final products made by various methods, they showed good features in pyrolysis temperature, heat-resisting, variation of moisture content and particle distribution.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.53-53
• /
• 2011

자동차용 천연가죽 시트의 제조 공정에서 크롬과 비크롬 Metalic 탄닝제, 식물성 탄닝제, 신탄(Syntan) 및 가지제(Fatliuor) 등의 종류와 함량에 따른 인장강도, 신장율, 정하중 신율, 잔류줄음율 등을 측정하여 특정하중에 따른 콜라겐 섬유 조직의 영구변형율과의 상관관계를 비교 분석해본 결과, 크롬 및 비크롬계 탄닝제에 비해 식물성 탄닝제를 적용하였을 때 조직의 변형율이 적었으며, 리틴닝 공정에서 아크릴계, 레진계 및 단백질계 신탄을 혼합 적용하였을 때 가죽의 배(Belly)부위의 물성 균일화 효과가 우수하였으며, 음이온성 가지제 9%를 사용하여 가죽에 유연성을 부여함으로써 조직이 치밀하고 변형율이 감소되어 내구성이 우수한 결과를 나타내었다.

• Clean Technology
• /
• v.10 no.1
• /
• pp.27-35
• /
• 2004

Domestic leather company is working hard to solve present environmental problem. Leather industry is realized by representative pollution industry. An advanced nation is trying to develop clean technology by collaborating research institute with the chemical company, and tannery. This research introduced information that is gained through technical transfer in leather processing. This project started to solve environmental problem of leather industry. Specially the environment and economic problem is caused from chrome which exists in the waste water or solid waste. Representative technologies, reduced chrome tanning, non-chrome tanning method, are being introduced through transfer. Also lightweight leather development advances the research which uses non-metal tanning agent.

• Applied Biological Chemistry
• /
• v.44 no.4
• /
• pp.257-261
• /
• 2001

Leather (skin & hide) is a body organ, comprising 3 to 5% of the animals weight. The cross-section of a leather is composed of two major divisions: the epidermis or grain layer and the corium or split layer. The leather is naturally covered with bacteria and fungi, because it is a particularly rich source of a wide variety of microorganisms. Stains or coatings of different colours occur in patches or over large areas, depending on the type of mould spore infestation. We examined the antibiotic effect of leather after washing. Upon applying equal fungicide, antibiotic effects increased as follows: grain layer>middle layer>flesh layer. Antibiotic effect decreased with increasing frequency of washing. Decrease in antibiotic effect was lower in OITZ fungicide than in TCMTB and CMK fungicides. Sulfated fatliquor showed higher antibiotic effect than phosphated fatliquor.

• Clean Technology
• /
• v.11 no.2
• /
• pp.83-90
• /
• 2005

This paper is about a new method of synthesis organic tanning agent (polymer, polyphenol, polyresin) and discusses their tanning property. It was found that properties of the leather manufactured with application of organic tanning agent were similar to those applied with conventional chrome tanning agent and reducing effects of Cr, T-N, COD, SS concentrations in the effluent.

• Clean Technology
• /
• v.14 no.3
• /
• pp.193-203
• /
• 2008

A surfactant is used to assist the effect of cleaning, dispersibility and adhesion during leather manufacturing process. Existing surfactant for that process includes many hydrophilic groups that may cause problem such as stain, bad water resistance and poor durability, etc. It is potential problem to make high-performance property for future leather market. In this study, we have synthesized the fluorinated surfactant of which property decreases surface tension, increases dispersion, cleaning effect and the better chrome absorption by the high bond energy of C-F to complement weakness that the present alkyl derivative surfactants have. Using fluorinated surfactant, we can confirm that dispersion is increased, chrome absorption ratio is augmented with high osmosis and coherence, chrome content in the tanning waste water is reduced, BOD and COD contents are diminished and physical characteristics are improved.