• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.3
• /
• pp.240-245
• /
• 2004

This paper presents a Switched Reluctance Motor(SRM) drive using the self-tuning control method to achieve the maximum torque. SRM has the difficulty to research it by an analytic method and to control the speed End torque because of the high nonlinearity. So, in this paper, the self-tuning control method is applied to relevantly controlling turn-on/off angle to operate at the maximum torque. Also, the feedback signals to control the turn-on/off angle are the encoder pulse and the increment of phase current. At first, n adequate turn-off angle is searched by itself and then a turn-on angle is done. As the relationship between turn-on and him-off angle is mutual dependent, the turn-on/off angle is controlled by a real time self-tuning control method in order to maintain the maximum torque. The proposed self-tuning Algorithm is verified by experiments.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.2
• /
• pp.142-150
• /
• 1985

In this paper, stress distribution were given in consideration of bending effects in hemi-spherical shell and a modified equation of buckling load was represented with implicating the effects of plastic deformations and shape parameters. Especially, the distributions of shell near it's vertex were analyzed numerically, according to several cases of loading. For the sake of more good estimation of plastic dissipating energy, we used the yield-line method from plate theory. The modified criterion of bucking, P super(*) sub(cr), that was suggested in this study, was applied to SUS 302 stain-less steel hemi-spherical shell which had it's Poisson's ratio and Young's modulus with 0.33 and 19700 kg/mm$^2$. From some experiments and comparisons with other results, 재 suggested the critical buckling-load-equation with P super(*) sub(cr)=2E super(*).(t super(2)/a super(2)).{3(1-ν super(*2)} and computed the buckling initiation load with this equation. Because these result from modified criterion have more coincidence than previous one, we prospect this equation can be magnified it's utilities to the other materials.

• Journal of Korean Home Economics Education Association
• /
• v.27 no.1
• /
• pp.31-50
• /
• 2015

The purpose of this study was to analyze duplicated contents of 'Food and Nutrition unit' of Home Economics and other subject textbooks for the middle school students. In order to achieve the purpose, the textbooks of "Home Economics I II", "Science I II III", "Ethics I II", "Physical education", and "Health education" were analyzed. The results of the analyses were as follows. According to the analyses of the common contents with other subjects related to the 'Food and Nutrition unit' in the "Home Economics I II" textbooks for the middle school students under the 2009 revised curriculum, the high percentages of the common contents were found in "Science" curriculum and "Health education" curriculum, followed by "Physical education" and "Ethics". It was observed that the Home Economics curriculum provided not only the theoretical basis about the dietary issues that the youth faces but also a plan to address those issues, as "Home Economics" textbooks were focused on 'dietary problems of the youth', 'balanced diet', 'green diet', and 'Korean-style diet'. The "Science" curriculum focused on scientific theories and principles, as the "Physical Education"and the "Health education" focused on health. In contrast, it was revealed that the "Ethics" curriculum considered 'Koreans' identity' and 'environment'. Overall as for the strength of 'Food and Nutrition unit' of "Home Economics"compared to those of other subjects, comprehensive contents for dietary life had been dealt with according to the development of the adolescent in "Home Economics", while other subjects focused on specific contents or examples concerned with 'Food and Nutrition unit'. In this regard, the dietary education for the middle school students will be more effectively conducted by "Home Economics", as compared with other subjects.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.6
• /
• pp.1609-1619
• /
• 2016

The aim of this study was to identify the construct validity and reliability of a Korean version of the Wellness Evaluation of Lifestyle (K-WEL). A total of 345 nursing students completed the 99-item K-WEL. Construct validity using exploratory and confirmatory factor analysis were conducted using SPSS WIN 22.0 and AMOS 18.0. The final K-WEL consisted of 71 scored items, 14 subscales (self worth, work, spirituality, gender identity, love, friendship, realistic belief, leisure, exercise, nutrition, stress management, emotional responsiveness, sense of control, sense of humor) and 4 factors (essential, social, physical and coping self). Goodness of fit of the final research model was acceptable as shown by ${\chi}^2=225.12$, p<.001, CMIN/DF=3.17, RMSEA=.08, NFI=.87, IFI=.91, CFI=.91. The convergent validity and discriminant validity was evaluated by AVE (.61~.69) and C.R. (.79~.89). The Cronbach's alpha values were .55~.87 for the subscales of K-WEL. This study shows that the K-WEL is a valid and reliable measurement to assess multidimensional aspects of wellness.

• The Korean Journal of Zoology
• /
• v.32 no.4
• /
• pp.393-403
• /
• 1989

Using starch gel electrophoresis of proteins, we examined variation at 24 genetic loci in five species (three general of the Subfamily Danioninae (Class Pisces, Family Cyprinidae) inhabiting In Korea. The average degree of genic variation of the Subfamily Danioninae (A=1.8, P=16.5%, HD=0.043, HG=0.049) was far less than that of the fresh water fishes in general. But the degree of genic variation of A. chinensis (P=32.5 HD=0.100, HG=0.119) was highe, than other fishes and the value of O. biders was the lowest (P=4.2%, HD=0.008, HG=0.008). The average genetic similarities among the populations in each species of A. chinensis, Z. platypus, Z. temmincki MS type, Z. temmincki W type, and O. widens were S=0.902, 0.899, 0.990, 0.914, and 0.992, respectively. The average genetic similarity of A. chinensis to the other species was the lowest value of S=0.235, whereas that between two species of Z. temmincki was the highest of S=0.822. Genetically, Z. plypus is more similiar to O. widens than ho species of the same genus Zacco. Based on estimated divergent time of 5 species of the Subfamily Danioninae (7.6 to 0.9 million years) it is assumed that they are speciated during late Pliocene to middle Pleistocene epoch.

• Korean Journal of Social Welfare
• /
• v.54
• /
• pp.5-33
• /
• 2003

This study is about the re-validation evaluation of the family Relationship Scale (FRS), developed to measure the family relationship in the social work practice. This study aims at re-validating the FRS, developed and validated in by Yang in 2001 for more general utilization. The sample was married mates and females residing in Seoul. For Face Validity, the content analysis was performed, and the FRS was re-validated in the dimensions of Love & Caring, Acceptance, and Recognition, positive affection, empathy, and autonomy and flexibility for each area. Internal reliability was .93, and internal consistency among three dimensions was 93%. For Empirical Validity, the Construct validity, the Criterion validity, and the Discriminant validity were performed. Construct Validity was validated through factor analyses. Commonalities for the factor analysis was 54%, and the factor loading for each factor was over .45. The confirmative factor analysis also confirmed the fitness of the scale. For Predictive Validity of Criterion Validity, regression analysis showed that the family stress scores became lower as the scores of the family relationship became higher; the discriminant analysis revealed that the family stress turned low ill tile group of high scores of family relationship. The Correlation analysis for Concurrent Validity was performed and the results showed the positive and significant relationship with a couple communication level (r=54) and a parent-child communication level (r=64). Life satisfaction and mental health level also revealed significantly positive correlation to prove Convergent Validity. Physical health level revealed a weak relationship with family relationship providing the evidence of Discriminant Validity. Discriminance was also proved by the analysis of variance with demographics. Thus, Cross Validation was confirmed the validation of the FRS through the various analyses with the married population. This study result improved the validity generalization of the Scale and verify the generalized usage of this sociometric scale in the field of social work practice.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.5-14
• /
• 2005

Local self-governing bodies have created community identity to activate local communities. community identity is one of the very effective ways to establish a different image from other self-governing bodies and to raise locals' love of hometown and sense of belonging. In addition to community identity., there are several things to form identity such as symbols (like flowers, birds, and animals) of local self-governing bodies or characters visualizing figures, tradition, and specialties of the region. Recently local governments have introduced various programs such as brand planning like city brand, and local events. This study analyses the basic elements, like symbol mark, logotype, and color, among visual elements of the current local self-governing bodies community identity. and conducts a comparative analysis of the visual elements of symbols and characters. The results show that those community identities and other design elements lack differentiation and consistency among visual elements. To create differentiated image of local self-governing bodies, it needs to develop unique and various themes of the region and to generate synergy effect through consistency and interactions among various visual effects based on community identity.

• Geotechnical Engineering
• /
• v.9 no.3
• /
• pp.77-90
• /
• 1993

In the settlement analysis of shallow foundation soil properties, loads and soil strata involve many uncertainties so it is necessary to do analysis of settlement that considers the probabilistic properties of each variable. This study is performed to probabilistic analysis for settlement of shallow foundation consisted of individual footings by using Monte Carlo Method. To consider the uncertainty of variables, both the soil properties and loads are assumed to be normal distribution random variables and get settlement mean and coefficient of variation of individual footing. And the settlement of each individual footing is also assumed to be normal distribution. Settlement of each individual footing which considers the probability of soft soil pockets in soil strata follows Markov process. Then it is performed to do sensitivity analysis which is involved to excess probability of allowable criteria of maxi mum settlement and differential settlement according to varity of each variable. It is thought to be proper that the settlement analysis of shallow foundation should be analyzed considering uncertainty of variables and soil stratum conditions.

• Journal of the Korean Magnetics Society
• /
• v.11 no.6
• /
• pp.278-284
• /
• 2001

Recently patented rights affect the competitive power of each country. Specially the situation of that country will be superiority if one country has lots of basic invention patents in advanced technology. In the near future, research results in universities or research institutes should be involved with patent application so that the investment of research funds improves our technology. Alloy is used to adjust magnetic characteristic in invention for magnetic recording medium. In this case there must be cautious in make out the patent claims of invention about such alloys. The patent for alloy invention is considered with following standard. (1) composition range and structure aspect according to the need of a composition metal (2)characteristics of the alloy and for use.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.11a
• /
• pp.99-102
• /
• 2009

본 연구에서는 실제 기증받은 시체를 이용하여 인체의 각 구조물을 실제 모습 그대로 3D 이미지화하는 과정에 대해 알아보았다. 인체의 구조물을 3D 로 이미지화하는 과정은 다음과 같다. 먼저 시체를 0.2mm 간격으로 절단하여 절단면의 사진을 찍은 후, 각 절단면의 사진에서 각각의 구조물을 구역화하여 색칠을 한 후, 구역화한 이미지에서 외곽선을 추출하여 벡터 이미지를 만든다. 이 외곽선을 1mm 간격으로 쌓아 올린 후 그 표면을 재구성하여 3D 이미지로 변환하는 과정으로 진행되었다. 3D 이미지의 제작은 가슴 부위에 한정하여 이루어졌다. 인체의 해부학적인 모형을 3D 이미지로 시각화함으로써 얻는 효과는 일반인을 대상으로 인체의 내부에 대한 시각적인 호기심을 충족시켜주고 의학 상식을 넓히는데 도움을 줄 수 있을 것 이다. 또한 의대생들을 비롯한 의학 전문가들에게는 생생한 해부학 강의용으로도 활용 가능하다. 향후 Haptic 시스템을 이용한 의료 실습 어플리케이션과 접목될 수도 있을것이고, fMRI 데이터를 비롯한 타 데이터와의 융합을 통해 시각화하여 서비스 할 수도 있다. 이처럼 인체의 3D 모형은 의료분야에서 광범위하게 활용될 수 있는 데이터로써 그 가치를 지닐 것이다.