• Spatial Information Research
• /
• v.22 no.2
• /
• pp.53-62
• /
• 2014

The floor field model is the micro pedestrian model based on a cellular automata for modeling pedestrian movement in the interior space using the static and dynamic floor field. It regards a form of pedestrian as square but the actual pedestrian's shape and size are similar to ellipsoid or rectangle. Because of this, we are difficult to give a rotation effect to pedestrians and there is a limit to reflect an impact of clogging and jamming. Also, this model is not able to reflect an impact of a posture and visibility effectively in the pedestrian movement. In this study, we suggest the improved pedestrian model incorporating the actual shape and size of pedestrian. The pedestrian's shape is defined not square but rectangle which is close to the actual body size of Korean. Also, we define the model which is able to represent the impact of clogging and jamming between pedestrians by adding the pedestrian's posture. We develop the simulator for testing the suggested model and study the difference between two models by comparing a number of effects. As a result, we could confirm solving the problem with dynamic value in the existed model and reflecting the panic effect in evacuation situation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.225-225
• /
• 2010

적외선 영역에서의 밴드갭 에너지를 가지고 있는 III-V 족 화합물 반도체 물질인 $InAs_xSb_{1-x}$는 좋은 성장 안정성과 높은 전자, 홀 이동도를 가지며, 제작 비용이 적게 드는 등 적외선 광소자 제작에 많은 이점을 가지고 있기 때문에 그에 관한 연구가 최근 활발히 진행 되고 있다. 하지만 이러한 $InAs_xSb_{1-x}$를 소자 제작에 이용하기 위해서는 임의의 As 함량에 따른 InAsSb의 물질의 광학적 특성 정보가 필요하다. 본 연구에서는 1.5~6.0 eV 에너지 구간에서 $InAs_xSb_{1-x}$ ($0{\leq}x{\leq}1$) 화합물의 임의의 As 함량에 따른 유전함수를 분석하고 그 분석 변수들을 보고하고자 한다. 기성박막층착장치 (molecular beam epitaxy)를 이용하여 GaAs 기판 위에 성장 시킨 $InAs_xSb_{1-x}$ (x = 0.000, 0.127, 0.337, 0.491, 0.726, 1.000) 박막의 순수한 유전함수 $\varepsilon$을 화학적 에칭을 통해 산화막 층을 제거하여 타원편광분석법을 이용하여 얻었다. 측정된 유전율 함수는 Gaussian-broadened polynomial 들의 합으로서 반도체 물질의 유전함수를 정확히 기술하는 변수화 모델을 이용하여 재현하였다. 변수화 모델을 통해 얻어진 각각의 변수들을 As 조성비 x 에 대한 다항식으로 피팅하여 임의의 As 조성비에 대한 변수 값을 얻었다. 그 결과 임의의 조성비에 따른 $InAs_xSb_{1-x}$ ($0{\leq}x{\leq}1$) 의 유전율 함수를 얻어낼 수 있었다. 우리는 이러한 결과가 물질의 실시간 성장 모니터링이나 다층구조 분석, 광소자의 제작 등에 유용한 정보를 제공할 것으로 확신한다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.49-55
• /
• 2008

The face extraction is very important to provide the images of the roads and road sides without the problem of privacy. For face extraction form roadside images, we detected the skin color area by using HSI and YCrCb color models. Efficient skin color detection was achieved by using these two models. We used a connectivity and intensity difference for grouping, skin color regions further we applied shape conditions (rate, area, number and oval condition) and determined face candidate regions. We applied thresholds to region, and determined the region as the face if black part was over 5% of the whole regions. As the result of the experiment 28 faces has been extracted among 38 faces had problem of privacy. The reasons which the face was not extracted were the effect of shadow of the face, and the background objects. Also objects with the color similar to the face were falsely extracted. For improvement, we need to adjust the threshold.

• Progress in Medical Physics
• /
• v.15 no.2
• /
• pp.84-93
• /
• 2004

Stereotactic radiosurgery (SRS) is a technique that delivers a high dose to a target legion and a low dose to a critical organ through only one or a few irradiations. For this purpose, many mathematical methods for optimization have been proposed. There are some limitations to using these methods: the long calculation time and difficulty in finding a unique solution due to different tumor shapes. In this study, many clinical target shapes were examined to find a typical pattern of tumor shapes from which some possible ideal geometrical shapes, such as spheres, cylinders, cones or a combination, are assumed to approximate real tumor shapes. Using the arrangement of multiple isocenters, optimum variables, such as isocenter positions or collimator size, were determined. A database was formed from these results. The optimization procedure consisted of the following steps: Any shape of tumor was first assumed to an ideal model through a geometry comparison algorithm, then optimum variables for ideal geometry chosen from the predetermined database, followed by a final adjustment of the optimum parameters using the real tumor shape. Although the result of applying the database to other patients was not superior to the result of optimization in each case, it can be acceptable as a plan starling point.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.41-41
• /
• 2017

본 연구는 초분광 영상을 이용하여 수박 모종의 수분함량을 비파괴적으로 추정하기 위해 수행되었다. 단계적으로 수분 스트레스를 받은 수박(n=45) 모종을 초분광 영상시스템으로 촬영하여 모종 영역의 반사율을 추출하였고, 매 촬영 후 모종의 생체중과 건물중을 측정하여 수분함량을 계산하였다. 모종의 반사율과 계측된 수분함량을 변수로 하여 Partial Least Square Regression(PLSR) 분석을 이용하여 수분 추정 모델을 구축하였다. 수분 추정모델을 작성한 결과 Calibration(Cal.)의 정확도($R^2$)는 0.66, 정밀도(RMSE 및 RE)는 각각 1.06%, 1.14%로 나타났다. 수박 모종의 수분함량 추정모델의 정밀도는 상당히 높게 나타났으나 정확도는 낮게 나타났다. 정확도를 개선하기 위해 Confidence ellipses의 신뢰구간을 95%로 설정하였을 때 3개의 모종이 타원 밖에 위치하는 것을 발견하였으며 이를 제거 후 재분석을 하였다. 3개의 모종을 제외한 수박 모종의 수분함량 추정모델의 정확도는 0.82, 정밀도는 0.73%, 0.78%로 나타났다. 3개의 모종을 제외함으로서 모델의 정확도 및 정밀도가 상승하여 3개의 모종이 정확도 및 정밀도를 낮추는 원인이라 판단된다. 작물은 가뭄스트레스를 받을수록 반사율이 낮아지지만(Yang et al., 2010) 3개의 모종은 다른 모종의 수분함량에 비해 반사율이 큰 차이를 나타내어 정확도 및 정밀도를 낮춘 것으로 판단된다. 본 연구를 통해 초분광 영상을 이용하여 수박 모종의 수분함량 추정가능성을 시사하였고, 모델의 정확도를 개선하기 위해 샘플 수 및 수분함량의 변이를 증가시키는 것이 필요하다고 판단된다.

• Applied Microscopy
• /
• v.38 no.1
• /
• pp.51-61
• /
• 2008

This simulation study examined the effect of data acquisition error including the data type of TEM image, and incident beam intensity of the tilt series on 3D tomograms. Simulation was performed with the 3D head phantom model of Kak and Slaney, and the slightly modified 3D head phantom model with enhanced difference in absorption coefficients. Reconstructed tomogram for the original head phantom model using 8-bit gray-scale image was distorted with extremely high level of noise, while an acceptable result was obtained for the modified model. The results for the original model using wrong formulation for the transmitted beam intensity was proved to be incorrect. The high level of noise along the z direction was found in case of the modified model. On the other hand, the wrong value of incident beam intensity in both models gave distorted results. In order to reconstruct an artifacts-free 3D structure from the projections with invisible features in electron tomography, the 16-bit projection images should be used with the correct incident beam intensity which is applied to Beer's law.

• Journal of Biomedical Engineering Research
• /
• v.23 no.3
• /
• pp.171-179
• /
• 2002

It is well known that the geometry of the articular surface plays a major role in the kinematic and kinetic analysis to understand human knee joint function during motion. The functionality of the knee joint cannot be accurately modeled without considering the effects of sliding and lolling motions. We Present a 3-D human knee joint model considering sliding and rotting motion and major ligaments. We employ more realistic articular geometry using two cam profiles obtained from the extrusion of the sagittal Plain view of the representative Computerized Tomography image of the knee joint compared to the previously reported model. Our model shows good agreement with the already reported experimental results on Prediction of the lines of force through the human joint during gait. The contact point between femur and tibia moves toward the Posterior direction as the knee undergoes flexion, reflecting the coupling of anterior and Posterior motion with flexion/extension. The anterior/posterior displacement of the contact Point on the tibia plateau during one gait cycle is about 16 mm. for the lateral condyle and 25 mm. for the medial condyle using the employed model Also. the femur motion on the tibia undergoes lateral/medial movement about 7 mm. and 10 mm. during one gait cycle for the lateral condyle and medial condyle. respectively. The developed computational model maybe Potentially employed to identify the joint degeneration.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.193-193
• /
• 2009

Thin-type 초음파모터의 구조는 크로스형태의 앓은 스테이터에 윗면과 아랫면에 각각 8개의 압전세라믹이 부착된 형태이고, 압전세라믹의 분극방향은 로터와 접촉하는 스테이터의 중심부인 네 개의 타점에서 순차적인 타원변위가 생성되도록 결정된다. 유한요소해석프로그램인 ATILA 5.2.4를 사용하여 형태, 길이, 두께, 스테이터 재질, 클램프특성이 최적 설계된 모델을 제작하였고, 푸쉬풀 게이지, x-y 스테이지, rpm 메터, 토크 게이지, 맨코더, AD컨버터를 이용하여 피드백 제어 구동시스템을 구성하였다. 그림 I은 마이크로컨트롤러 (ATmega)와 피드백회로를 이용한 구동 드라이버를 보여준다. 한 주기에서 1/4분주의 순차적인 네 개의 구형파를 생성하고, 이를 push-pull회로를 통하여 90도의 위상차가 나는 정현파를 생성하여 초음파 모터의 구동전원으로 사용한다. 피드백 회로인 엔코더와 AD 컨버터는 초음파모터의 속도를 피드백하여 정속도 운전을 위한 전압제어에 사용되었다. 특성 측정 결과, 제품화된 드라이버와 비교하여 큰 차이를 보이지 않았고 피드백 회로를 통하여 부하변화에 따른 속도의 극심한 변화를 0.2~0.4[N]의 범위에서 정속도 운전이 가능하였으며, 장시간의 운전에도 온도 및 속도특성이 안정적임을 확인하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.1
• /
• pp.49-58
• /
• 1996

This paper deals with the gravimetric solution of geoid by Fast Fourier Transform(FFT) technique in and around Korean Peninsula. The used reference surface is OSU91A geopotential model up to degree and order 180 refered to GRS80. The remove and restore technique was applied to obtain the geoidal height in this paper. And the FFT with 20% window was applied to compute the medium wavelength effect from terrestrial gravity anomalies. For the comparison of computed results, the geometric geoidal height was derived from GPS/Levelling data. According to the comparison, the mean value and RMSE of the differences are 0.3819m and 0.4695m respectively.

• Composites Research
• /
• v.17 no.4
• /
• pp.25-31
• /
• 2004

In this study, a refined beam analysis model has been developed for multi-celled composite blades with elliptic cross-sections. Reissner's semi-complimentary energy functional is introduced to describe the beam theory and also to deal with the mixed-nature of the formulation. The wail of elliptic sections is discretized into finite number of elements along the contour line and Gauss integration is applied to obtain the section properties. For each cell of the section, a total of four continuity conditions are used to impose proper constraints for the section. The theory is applied to single- and double-celled composite blades with elliptic cross-sections and is validated with detailed finite element analysis results.